• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.581-587
• /
• 2005

In order to obtain a highly purified p-dioxanone (PDX) as monomer of biodegradable polymer, suitable solvent must be selected. The selection was based on the solubility of impurities, and partial layer melt crystallization were carried out under the presence of solvent. The solubility of PDX in various solvents such as ethyl acetate, tetrahydrofuran, acetone, alcohols (methanol, ethanol, 1-propanol, 1-butanol and 1-pentanol) were measured over the temperature range of $-10{\sim}15^{\circ}C$. As solubility parameters, the mixing and dissolution enthalpy between the PDX and the solvents was studied based on empirical equations and the regular solution theory. The solubility and the temperature dependency of the solubility with the solvents of acetone, ethylacetate, and tetrahydrofuran of PDX were shown to have relatively high values compared to the alcohol type solvents. Also, in same alcohols, the smaller molecules and higher polarity gave higher solvency. In partial layer melt crystallization, small amount of ethylacetate selectively dissolved impurities and gave highly purified p-dioxanone, over 99.9% purity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.6
• /
• pp.256-263
• /
• 2007

For $P_B=50Torr,\;P_T=5401Torr,\;T_S=450^{\circ}C,\;{\Delta}T=20K$, Ar=5, Pr=3.34, Le=0.01, Pe=4.16, Cv=1.05, adiabatic and linear thermal profiles at walls, the intensity of solutal convection (solutal Grashof number $Grs=7.86{\times}10^6$) is greater than that of thermal convection (thermal Grashof number $Grt=4.83{\times}10^5$) by one order of magnitude, which is based on the solutally buoyancy-driven convection due to the disparity in the molecular weights of the component A ($Hg_2Cl_2$) and B (He). With increasing the partial pressure of component B from 20 up to 800 Torr, the rate is decreased exponentially. It is also interesting that as the partial pressure of component B is increased by a factor of 2, the rate is approximately reduced by a half. For systems under consideration, the rate increases linearly and directly with the dimensionless Peclet number which reflects the intensity of condensation and sublimation at the crystal and source region. The convective transport decreases with lower g level and is changed to the diffusive mode at $0.1g_0$. In other words, for regions in which the g level is $0.1g_0$ or less, the diffusion-driven convection results in a parabolic velocity profile and a recirculating cell is not likely to occur. Therefore a gravitational acceleration level of less than $0.1g_0$ can be adequate to ensure purely diffusive transport.

• Biomedical Science Letters
• /
• v.9 no.4
• /
• pp.195-201
• /
• 2003

Aromatic hydrocarbons are of major concern among genotoxic chemicals due to their toxicity and persistence. Some microorganisms can utilize aromatic hydrocarbons as carbon and energy sources by inducing expression of catabolic operon(s). The XylR regulatory protein activates transcription of the catabolic enzymes to degrade BTEX (benzene, toluene, ethylbenzene, and xylene) from its cognate promoters, Pu and Ps upon exposure of the cells to the aromatic hydrocarbons. The activity of XylR on the promoters was previously monitored using luciferase luc reporter system. The xylR, its promoter Pr and the promoter Po for the phenolic compound catabolic operon were introduced upstream of firefly luciferase luc in the pGL3b vector to generate about 7.1 kb of pXRBTEX. Here E. coli harboring the plasmid was freeze-dried under various conditions to fin,d optimal conditions for storage and transport. The cell viability and luciferase activity were maintained better, when the cells were freeze-dried at -7$0^{\circ}C$ in the addition of the 10% skim milk or 12% sucrose. However, coaddition of protectants such as 10% skim milk plus 10% glucose or 12% sucrose plus 10% glucose, resulted in much better viability and bioluminescence activity compared with the effect of single addition of each protectant. In addition, it was shown that the freeze-dried cells maintained almost intact bioluminescent activities and cell viability for at least 1 week after freeze-drying. This work demonstrated that the properly freeze-dried recombinant bacterial cells could be utilized as a whole-cell biosensor for simple and rapid monitoring of BTEX in the environment.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.4
• /
• pp.221-230
• /
• 2000

이성분 희토류 원소로 치환된 4종류의 합성불화인회석(synthetic fluorapatite) (Ap49: La+Gd, Ap50:Ce+Dy, Ap51: Pr+Er, Ap54: Eu+Lu; $Ca{10-x-2y}$ $Na_{y}$ $REE_{x+y}$($P_{1-x}$ //$Si_{x}$ $_{4}$)$_{6}$ $F_{2}$, x=0.13~0.12, y=0.26~0.42)을 대상으로 X-선 회절분석을 통해 얻어진 자료를 이용하여 리트벨트 구조분석을 실시하고 치환된 희토류원소의 거동을 단결정법으로 구해진 결과와 비교.분석하였다. 리트벨트 구조분석결과 합성불화인회석은 공간군 $P6_3$/m, 단위포는 평균하여 a=9.3906(1) $\AA$, c=6.8924(1) $\AA$, V=527.36 $\AA^3$의 값을 갖는다. 구조의 정밀도를 나타내는 R 지수를 보면 $R_{B}$ / 값은 17.29~18.80이고 S(GofF)값은 1.44~1.68로 계산되었다. 불화인회석은 9개의 산소를 배위하는 Ca1자리와 6개의 산소와 하나의 불소가 배위하는 Ca2자리가 있으며 Ca1-O의 평균거리는 2.563 $\AA$이고 Ca2-O의 평균거리는 $2.460 \AA$으로 Ca1자리가 Ca2자리보다 다소 크다. 구조자리 치환식에서는 $Ca^{2+}$ / 자리를 치환하는 $REE^{3+ }$ 로 인하여 전하균형을 맞춰주기 위해서 인과규소가 함께 참여하였다. ($REE^{3}$+Si$^{ 4+}$ $2Ca^{2+}$ : Ca1) 계산된 희토류원소의 자리점유율(REE-Ca2/REE-Cal)은 원자번호가 증가함에 따라 일정하게 감소하는 경향을 보여주며 이는 희토류원소의 거동이 LREE는 크기가 상대적으로 작은 Ca2 자리에 우선 치환되고 HREE는 크기가 큰 Ca1자리에 우선 치환되는 경향을 지시한다.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.735-744
• /
• 2012

In order to quantify the flow distribution characteristics of APR+ reactor, a test was performed on a test facility, ACOP ($\underline{A}$PR+ $\underline{C}$ore Flow & $\underline{P}$ressure Test Facility), having a length scale of 1/5 referring to the prototype plant. The major parameters are core inlet flow and outlet pressure distribution and sectional pressure drops along the major flow path inside reactor vessel. To preserve the flow characteristics of prototype plant, the test facility was designed based on a preservation of major flow path geometry. An Euler number is considered as primary dimensionless parameter, which is conserved with a 1/40.9 of Reynolds number scaling ratio. ACOP simplifies each fuel assembly into a hydraulic simulator having the same axial flow resistance and lateral cross flow characteristics. In order to supply boundary condition to estimate thermal margins of the reactor, the distribution of inlet core flow and core exit pressure were measured in each of 257 fuel assembly simulators. In total, 584 points of static pressure and differential pressures were measured with a limited number of differential pressure transmitters by developing a sequential operation system of valves. In the current study, reactor flow characteristics under the balanced four-cold leg flow conditions at each of the cold legs were quantified, which is a part of the test matrix composing the APR+ flow distribution test program. The final identification of the reactor flow distribution was obtained by ensemble averaging 15 independent test data. The details of the design of the test facility, experiment, and data analysis are included in the current paper.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.169-170
• /
• 2006

In this study, ultra thin films of ferroelectric vinylidene fluoride-trifluoroethylene (VF2-TrFE) copolymer were fabricated on degenerated Si (n+, $0.002\;{\Omega}{\cdot}cm$) using by spin coating method. A 1~5 wt% diluted solution of purified vinylidene fluoride-trifluoroethylene (VF2:TrFE=70:30) in a dimethylformamide (DMF) solvent were prepared and deposited on silicon wafers at a spin rate of 2000~5000rpm for 30 seconds. After annealing in a vacuum ambient at $200^{\circ}C$ for 60 min, upper gold electrodes were deposited by vacuum evaporation for electrical measurement. X-ray diffraction results showed that the VF2-TrFE films on Si substrates had $\beta$-phase of copolymer structures. The capacitance on $n^+$-Si(100) wafer showed hysteresis behavior like a butterfly shape and this result indicates clearly that the dielectric films have ferroelectric properties. The typical measured remnant polarization (2Pr) and coercive filed (EC) values measured using a computer controlled a RT-66A standardized ferroelectric test system (Radiant Technologies) were about $0.54\;C/cm^2$ and 172 kV/cm, respectively, in an applied electric field of ${\pm}0.75\;MV/cm$.

• Radiation Oncology Journal
• /
• v.14 no.2
• /
• pp.115-122
• /
• 1996

Purpose : To improve the treatment results of locally advanced nonsmall cell lung cancer (NSCLC) patients we treated those patients with regional hyperthermia combined with radiotherapy. And we conducted a retrospective analysis of the results. Material and Methods Thirty two nonsmall cell lung cancer Patients treated at the Department of Radiation Oncology, St. Mary's hospital, Catholic University Medical College were the base of this analysis. Fourteen patients of above them were treated with hyperthermia and radiotherapy of more than 3000 cGy in radiation dose. Radiofrequency capacitive hyperthermia was administered twice weekly immediately after radiotherapy. Total sessions of hyperthermia ranged from 3 to 13 times (mean 7.8). Eighteen patient received an external radiation therapy alone Median radiation dose was 5580 cGy (range, 3000-7000 cGy) in fraction of 180-300 cGy, 5 fractions per week. Results: The results of themoradiotherapy group (HTRT group) were compared with radiation alone group (RT group). There were no complete response (CR) and 12 Partial responses (PR) (CR rate $0\%$, response rate $85.7\%$) in HTRT group, whereas there were 2 CRs, 8 PRs and 8 no responses (CR rate $11.1\%$, response rate $55.6\%$) in RT group. There was significant differece in local response rate of the tumors between RT group and HTRT group (p < 0.05). Overall 2 rear survival rate and mean survival were $7.1\%$ and 10.5 months for HTRT group, and $0\%$ and 8.1 months for RT group. However, by the number of hyperthermia. in cases with more than or equal to 10 sessions of hyperthermia, there were significant improvement in 2 year year survival rate and mean survival ($40.0\%$ and 18.2 months) compared with those in cases with less than 10 sessions of hyperhtemia ($7.4\%$ and 7.4 months) (p < 0.05). Conclusion : Thermoradiotherapy in locally advanced NSCLC patients increased their response rate but not 2 year survival and mean survival, therefore thermoradiotherpy with enough number of hyperthermia is suggested that may be one of the effective palliative treatments of those patients. And in cases with more than 10 sessions of hyperthermia, there showed improved 2 year survival rate and mean survival But the number of the cases was small further study in this aspect is required.

• Culinary science and hospitality research
• /
• v.8 no.3
• /
• pp.309-321
• /
• 2002

In this study, the characteristics of Jeung-pyun hatter were investigated by wine yeast. The processing conditions were optimized by physicochemical characterization including pH, volume, reduced sugar. The effect of yeast concentration, moisture content on the fermentation time and temperature were investigated in view of improving productivity. It was found that the volume was increased at maximum state when the fermentation was carried out at 35 $^{\circ}C$ with 0.1% yeast concentration 60% of moisture. The quality of Jeung-Pyun was most preferable in the condition of 0.1% wine yeast(Pasteur Red) for 8 hrs at 35$^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.612-619
• /
• 2011

Lanthanide(III) complexes of 1,2-diphenyl-4-butyl-3,5-pyrazolidinedione(phenylbutazone, PB) have been synthesized and characterized by elemental analyses, molar conductance measurements, IR, UV-Vis. and NMR spectra. The spectral data reveal that the PB acts as a bidentate and mono-ionic ligand coordinating through both the carbonyl oxygens of the pyrazolidinedione ring. The molar conductance data suggest that the complexes are non-electrolytes. The thermal behaviour of the complexes was studied by TG and DTG in air atmosphere and the results provide information about dehydration, thermal stability and thermal decomposition. The final products are found to be the corresponding metal oxides. The thermodynamic parameters and kinetic parameters were evaluated for the dehydration and decomposition stages. The negative entropy values of the decomposition stages indicate that the activated complexes have a more ordered structure than the reactants and that the reactions are slower than normal. Based on these studies, the complexes have been formulated as $[Ln(PB)_3]{\cdot}5H_2O$(Ln=La and Ce) and $[Ln(PB)_3(H_2O)_2]{\cdot}2H_2O$(Ln=Pr, Nd and Sm).

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.15
• /
• pp.6627-6632
• /
• 2015

Background: We conducted a study exploring the clinical safety and efficacy of decitabine in patients with acute myeloid leukemia (AML) and myelodysplastic syndromes (MDS), combined with a complex karyotype. Materials and Methods: From April 2009 to September 2013, a total of 35 patients with AML/MDS combined with a complex karyotype diagnosed in the First Affiliated Hospital of Soochow University were included for retrospective analysis. All patients were treated with decitabine alone ($20mg/m^2$ daily for 5 days) or combination AAG chemotherapy (Acla 20mg qod*4d, Ara-C $10mg/m^2$ q12h*7d, G-CSF $300{\mu}g$ qd, the dose of G-CSF adjusted to the amount in blood routinely). Results: In 35 patients, 15 exhibited a complete response (CR), and 6 a partial response (PR), the overall response rate (CR+PR) being 60% (21 of 35). Median disease-free survival was 18 months and overall survival was 14 months. In the 15 MDS patients with a complex karyotype, the CR rate was 53.3% (8 of 15); in 20 AML patients with complex karyotype, the overall response rate was 65% (13 of 20). The response rate of decitabine alone (22 cases) was 56.5% (13 of 22), while in the combination chemotherapy group (13 cases), the effective rate was 61.5% (8 of 13)(P>0.05). There are 15 patients with chromosome 7 aberration, after treatment with decitabine, 7 CR, 3 PR, overall response rate was 66.7% (10 of 15). Of 18 patients with 3 to 5 kinds of chromosomal abnormalities, 66.7% demonstrated a response; of 17 with more than 5 chromosomal abnormalities, 52.9% had a response. In the total of 35 patients, with one course (23 patients) and ${\geq}$two courses (12 patients), the overall response rate was 40.9% and 92.3% (P<0.05). Grade III to IV hematological toxicity was observed in 27 cases (75%). Grade III to IV infections were clinically documented in 7 (20%). Grades I to II non-hematological toxicity were infections (18 patients), haematuria (2 patients), and bleeding (3 patients). With follow-up until September 2013, 7 patients were surviving, 18 had died and 10 were lost to follow-up. In the 6 cases who underwent allogeneic hematopoietic stem cell transplantation (HSCT) all were still relapse-free survivors. Conclusions: Decitabine alone or combination with AAG can improve outcome of AML/MDS with a complex karyotype, there being no significant difference decitabine in inducing remission rates in patients with different karyotype. Increasing the number of courses can improve efficiency. This approach with fewer treatment side effects in patients with a better tolerance should be employed in order to create an improved subsequent chance for HSCT.