• 제목/요약/키워드: $PbO_2$

검색결과 2,056건 처리시간 0.032초

$xPb(Al_{0.5}Nb_{0.5})O_3-(1-x)Pb(Zr_{0.52}Ti_{0.48})O_3$계의 유전 및 압전특성 (1) (Dielectric and Piezoelectric Properties of the xPb$xPb(Al_{0.5}Nb_{0.5})O_3-(1-x)Pb(Zr_{0.52}Ti_{0.48})O_3$ System (1))

  • 이홍렬;윤석진;김현재;정형진
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제5권2호
    • /
    • pp.207-215
    • /
    • 1992
  • 본 연구에서 xPb(A $l_{0.5}$N $b_{0.5}$) $O_{3}$-(1-x)Pb(Z $r_{0.52}$ $Ti_{o.48}$) $O_{3}$계의 조성변화에 따른 유전 및 압전특성에 관해 실험한 결과 다음과 같은 결론을 얻었다. PAN의 첨가량이 증가함에 따라 c축은 수축되고 a축은 팽창하여 tetragonality는 감소하였고 grain의 크기와 Curie온도 또한 PAN의 첨가량에 따라 감소하였으나 밀도와 유전상수는 PAN의 양이 5mol%까지 증가하다가 그 이상에서는 감소하는 경향을 보였다. PAN의 첨가량이 증가함에 따라 시편의 비저항은 증가하였고 Kp는 PAN의 양이 5mol%첨가시 60%로 최대치를 보였으나 Qm은 최소치를 나타내었다.다.

  • PDF

Effect of Phosphoric Acid on the Electronic and Diffusion Properties of the Anodic Passive Layer Formed on Pb-1.7%Sb Grid of Lead-acid Batteries

  • El-Rahman, H.A. Abd;Salih, S.A.;El-Wahab, A.M. Abd
    • Journal of Electrochemical Science and Technology
    • /
    • 제2권2호
    • /
    • pp.76-84
    • /
    • 2011
  • Potentiostatic oxidation of Pb-1.7%Sb alloy used in the manufacture of grids of lead-acid batteries over the potential range from -1.0V to 2.3V in 5M $H_2SO_4$ in the absence and the presence of 0.4M $H_3PO_4$ and the self-discharge characteristics of the oxide layer formed is studied by electrochemical impedance spectroscopy (EIS). Depending on the potential value, sharp variations in resistance and capacitance of the alloy are recorded during the oxidation and they can be used for identification of the various substances involved in passive layer. Addition of $H_3PO_4$ is found to deteriorate the insulating properties of the passive layer by the retardation of the formation of $PbSO_4$. $H_3PO_4$ completely inhibits the current and impedance fluctuations recorded in $H_3PO_4$-free solutions in the potential range 0.5 V-1.7 V. These fluctuations are attributed to the occurrence of competitive redox processes that involve the formation of $PbSO_4$, $PbOSO_4$, PbO and $PbO_2$ and the repeated formation and breakdown of the passive layer. Self-discharge experiments indicate that the amount of $PbO_2$ formed in the presence of $H_3PO_4$ is lesser than in the $H_3PO_4$-free solutions. The start of transformation of $PbSO_4$ into $PbO_2$ is greatly shortened. $H_3PO_4$ facilitates the diffusion process of soluble species through the passive layer ($PbSO_4$ and basic $PbSO_4$) but impedes the diffusion process through $PbO_2$.

익산 미륵사지 석탑 사리공 내 출토 고대 유리 유물의 성분특성 분석 (Characteristic Analysis of Chemical Compositions for Ancient Glasses Excavated from the Sarira Hole of Mireuksaji Stone Pagoda, Iksan)

  • 한민수
    • 보존과학회지
    • /
    • 제33권3호
    • /
    • pp.215-223
    • /
    • 2017
  • 익산 미륵사지 석탑의 사리공 내에서 출토된 유리 유물 30점을 분석하여 이들의 성분특성과 상관성, 발색원소 등을 알아보고자 하였으며, 이를 왕궁리 출토 유리의 연구결과와 비교하여 상관관계를 검토하였다. 성분분석 결과, 유리구슬 24점은 $SiO_2$$Na_2O$ 성분을 다량 함유한 소다유리군에 속하며, 세부적으로 소다-알루미나유리계 ($Na_2O-Al_2O_3-CaO-Si_2O$)였다. 안정제로서 $Al_2O_3$, CaO, MgO가 첨가된 것으로 보이며, 이를 통해 LCHA(Low CaO, High $Al_2O_3$)형으로 분류할 수 있다. 착색물질은 Ti, Mn, Fe, Cu, Pb 등 성분이 발색에 영향을 준 것으로 판단된다. 나머지 6점은 모두 녹색계열의 유리판 또는 미상의 파편으로 PbO의 함량이 약 70wt.%, $SiO_2$의 함량이 약 30wt.%인 전형적인 $PbO-SiO_2$계의 납유리였다. 이들 유물을 동일 유적권인 왕궁리 출토 유리구슬의 성분과 비교한 결과, 일부 소다유리인 점은 유사하나 $Na_2O$의 함량이 상대적으로 미륵사지 유리 구슬이 매우 높고, 대부분 $K_2O$와 CaO의 함량이 낮다는 점이 다르다. 납유리의 경우도 PbO와 $SiO_2$ 함량이 약간 차이가 있다. 이는 두 유적지에서 제작된 유리 유물이 서로 다른 재료 또는 기술을 이용하였을 가능성도 있는 것으로 보인다.

고출력 압전 변압기용 압전 세라믹의 조성에 관한 연구 (A study on the composition of piezoelectric ceramic for high-power piezoelectric transformer)

  • 이종필
    • 한국산학기술학회논문지
    • /
    • 제12권1호
    • /
    • pp.390-395
    • /
    • 2011
  • 본 연구에서는 고출력 압전 변압기에 적합한 압전 세라믹을 찾고자 그 조성으로 PZT계에 $Pb(Mn_{1/3}Nb_{2/3})O_3$$Pb(Sb_{1/2}Nb_{1/2})O_3$이 첨가된 3성분계 조성인 0.95Pb($Zr_xTi_{1-x}$)$O_3$+yPMN+(0.05-y)PSN으로 하였는데, 기계적 품질계수를 향상시킬 목적으로 PMN을 선정하였고, PSN은 유전율 및 전기기계 결합계수가 PMN으로 인해 저하되는 것을 방지 하고자 선정하였다. 이 3성분계 조성에서 최적의 성능을 가질 수 있는 MPB(Morphotropic Phase Boundary) 영역에서 유전 압전 및 전기적 특성을 정량적 정성적으로 검토하였다.

공진법 기반의 [011] 분극 Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 압전단결정 물성규명 (Characterization of [011] Poled Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 Single Crystals by Resonance Method)

  • 제엽;심민섭;조요한;이원옥;이상구;이정민;서희선
    • 한국전기전자재료학회논문지
    • /
    • 제34권6호
    • /
    • pp.466-474
    • /
    • 2021
  • [011] poled ternary Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 (PIN-PMN-PT) single crystals have been investigated for active materials for acoustic transducers because of their high piezoelectric properties in both shear and transverse modes. In order to use [011] poled PIN-PMN-PT single crystals for acoustic transducers, the characterization of full-matrix material properties is required. In this study, full sets of compliance, dielectric, and piezoelectric constants of [011] poled rhombohedral PIN-PMN-PT were measured by a resonance method. Dimensions and geometries of 12 samples were proposed for measuring 17 independent material constants of [011] poled rhombohedral PIN-PMN-PT single crystals. Two sets of samples with different PT concentrations, 0.24PIN-0.49PMN-0.27PT and 0.24PIN-0.46PMN-0.30PT, were fabricated and their material properties were measured. Measured impedance spectra and simulated impedance spectra of the samples were compared to check the accuracy of the measurements.

PZT 박막 캐퍼시터의 특성에 기여하는 PZT-전극계면층의 영향 (Effects of PZT-Electrode Interface Layers on Capacitor Properties)

  • 김태호;구준모;민형섭;이인섭;김지영
    • 한국재료학회지
    • /
    • 제10권10호
    • /
    • pp.684-690
    • /
    • 2000
  • Metal-Ferroelectric-Metal(MFM) 구조의 개퍼시터에서 $Pb(Zr,Ti)O_3(PZT)$-전극 계면층이 PZT 박막 특성에 기여하는 영향을 알아보기 위하여 Pt/PZT/계면층/Pt/$TiO_2/SiO_2$/Si 구조의 캐퍼시터를 제작하였다. 계면층으로 사용될 물질들 중에서 $PbTiO_3(PT)$ 층을 sol-gel 방법으로 형성하였으며, PbO, $ZrO_2,\;TiO_2$ 층들을 reactive sputtering 방법으로 형성하였다. PZT박막을 구성하는 원소들로 이루어진 단순 산화물들의 특성을 평가하기 위하여 PbO, $ZrO_2,\;TiO_2$를 계면층으로 사용하여 $600^{\circ}C$에서 열처리를 실시하였고, 이 경우에는 $TiO_2$가 가장 우수하게 PZT의 결정립 크기를 미세하게 하는 효과를 보였으나, 두께가 증가함에 따라 표면 거칠기가 증가하고 anatase 상으로 남기 때문에 강유전특성이 열화되었다. 반면에 PT 박막을 계면층으로 사용한 경우에는 결정립 크기의 감소와 더불어 전기적인 특성도 향상되었다. 또한 PZT의 핵생성 위치를 판단하기 위하여 PT 삽입층의 위치를 변화하며, 실험한 결과, 하부전극과 PZT 박막의 계면에 PT 삽입층을 형성하였을 경우에 가장 효과적인 seed로서의 역할을 하였다.

  • PDF

PMN-PNN-PZT 세라믹스의 구조 및 유전특성 (Structure and Dielectric Properties of PMN-PNN-PZT ceramics)

  • 이종덕;박상만;박기엽
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
    • /
    • pp.257-260
    • /
    • 2003
  • In this study, the structural, dielectric and piezielectric properities of $xPb(Mg_{1/3}Nb_{2/3})O_3-(0.5-x)Pb(Ni_{1/3}Nb_{2/3})O_3-0.5Pb(Zr_{0.3}Ti_{0.7})O_3$ ceramics were investigated with the substitution of $PbMg_{1/3}Nb_{2/3}O_3$. The results showed that the substitution of the $PbMg_{1/3}Nb_{2/3}O_3$ was effective in increasing the dielectric constant and electromechanical coupling factor $(K_p)$. The dielectric constant, dielectric loss and Kp showed the highest values of 4293, 2.4%, 0.59 relatively, when the substitution of amount of $PbMg_{1/3}Nb_{2/3}O_3$ was 5 mol%.

  • PDF

수열법에 의한 PLT[$(Pb,La)TiO_3$ 분말의 합성 (Hydrothermal synthesis of PLT[$(Pb,La)TiO_3$] powders)

  • 김판채;최종건
    • 한국결정성장학회지
    • /
    • 제8권1호
    • /
    • pp.42-48
    • /
    • 1998
  • PLT($Pb_{1-x}La_{2x/3}TiO_3$, x=0.1~0.3) 분말의 합성을 수열법에 의해 행하였다. 최적의 PLT분말을 얻을 수 있는 합성조건은 반응온도; $250^{\circ}C$, 수열용매; 8M-KOH, 반응시간; 12시간이었으며, $Pb_{1-x}La_{2x/3}TiO_3$의 조성이 $x{\leq}0.2$일 때 단일상의 PLT가 얻어졌다. 수열적으로 얻어진 PLT분말에 있어서 tetragonality(c/a)와 상전이 온도는 고용된 La2O3 함량의 증가에 따라 감소하였으며, $Pb_{1-x}La_{2x/3}TiO_3$(x=0.2)의 Curie 온도는 약 $400^{\circ}C$이었다. 합성분말의 형태는 구상에 가깝고, 입자의 크기는 20~200mm 범위였다.

  • PDF