• 자원리싸이클링
• /
• 제21권4호
• /
• pp.53-59
• /
• 2012

본 연구에서는 비철제련의 공정 부산물에서 얻어진 Bi-Pb-Sb 3원계 합금 용탕의 산화반응에 따른 Sb과 Pb의 제거거동에 대하여 조사하였다. $N_2+O_2$ 가스를 침지 노즐을 통해 1173 K의 합금 용탕 중에 취입하여 Sb을 산화물과 금속상의 혼합물로 분리 회수할 수 있었다. 그리고 923 K의 Bi-Pb 2원계 용탕에 $N_2+O_2$ 가스를 취입하면 Pb가 산화되어 슬래그상으로 제거될 수 있으나, Bi도 동시에 산화되어 Bi를 정제할 수 없었다.

• 한국재료학회지
• /
• 제15권7호
• /
• pp.453-457
• /
• 2005

Piezoelectric properties of $Pb(Mn_{1/3}Nb_{2/3})O_3-PbZrO_3-PbTiO_3$ ceramics were investigated with $Al_2O_3$ content $(0.0-1.0 wt\%)$. The constituent phases, microstructure, electromechanical coupling factor, dielectric constant, piezoelectric charge and voltage constants were analyzed. Diffraction peaks for (002) and (200) planes were identified by X-ray diffractometer for all the specimens doped with $Al_2O_3$, indicating the MPB (morphotropic phase boundary) composition of tetragonal structures. The highest sintered density of $7.8 g/cm^3$ was obtained for $0.2wt\%\;Al_2O_3-doped$ specimen. Grain size increased by doping $Al_2O_3$ up to $0.3 wt\%$, and it decreased by more doping. Electromechanical coupling factor, dielectric constant, piezoelectric charge and voltage constants increased by doping $Al_2O_3$ up to $0.2wt\%$, and it decreased by more doping. This might result from the formation of oxygen vacancies due to defects in $O^{2-}$ ion sites and the substitution of $Al^{3+}$ ions.

• 한국세라믹학회지
• /
• 제35권5호
• /
• pp.458-464
• /
• 1998

Variations of reaction sequence of $Pb(Zn_{0.6}Mg_{0.4})_{1/3}Nb_{2/3}O_3$[PZMN] with precusor mixing methods were ex-amined using X-ray diffraction and dielectric characteristics. In the present study three different types of precursor mixing methods (oxide mixing PbO+$ZnNb_2O_6+MgNb_2O_6$[Zn+MN] and PbO+(Zn,Mg)$Nb_2O_6$[ZMN] precursor mixing) were adopted. When the oxide mixing method was used for the PZMN synthesis a Zn-rich perovskite phase and pyrochlore phase were formed. Compared with PbO+ZN+MN precursor mixing method the PbO-ZMN precursor led to a lowering of the formation temperature for perovskite sin-gle phase. These variation of composition and formation temperature of the perovskite phase were dis-cussed in terms of the difference in the solid-reaction requence between these three different types of pre-cursor mixing.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.161.2-161
• /
• 2002

• 한국결정성장학회지
• /
• 제13권2호
• /
• pp.63-67
• /
• 2003

Synthesis of $PbLaTiO_{3}$ : Mn powders containing La and Mn was carried out using $PbO,\;TiO_{2},\;La_{2}O_{3}\;and\;MnO_{2}$ as starting materials by hydrothermal method. In the synthesis of single phase $PbLaTiO_{3}$ : Mn powder containing La and Mn, the optimal x value corresponding to La substitution was 0.01 which corresponds to $0.99(Pb_{1-x}La_{2x/3}TiO_{3})+0.01MnO_{2}$. The optimal conditions for the preparation of the powder synthesis were 8 M-KOH solvent of hydrothermal solvent, $270^{\circ}C$ of reaction temperature and 24 hrs of run time. It was found that the synthesized powders had spherical morphology with average particle size of 70 nm and specific surface area of $5.5\;m^{2}/g$.

• E2M - 전기 전자와 첨단 소재
• /
• 제1권2호
• /
• pp.162-167
• /
• 1988

본 논문에서는 Pb(Sn$_{1}$7/Mn$_{2}$7/Nb$_{4}$7/)O$_{3}$- Pb(Zr, Ti)O$_{3}$계에 La$_{2}$O$_{3}$를 첨가하여 그양에 따른 압전일 전기력 성질의 변화를 고찰하였다. La$_{2}$O$_{3}$ 첨가량의 증가에 따라 유전상수, 압전 d상수, 유전손실, 비저항 등은 증가하였으나 경시 변화량은 오히려 감소하였다.

• 한국세라믹학회지
• /
• 제33권12호
• /
• pp.1311-1318
• /
• 1996

• 한국세라믹학회지
• /
• 제39권9호
• /
• pp.863-870
• /
• 2002

$Pb(Fe_{1/2}Ta_{1/2})O_3$의 $Ta^{5+}$을 $Ta^{5+}$과 이온반경이 같고 원자량이 약 1/2배인 $Nb^{5+}$으로 치환한 $Pb{{Fe_{1/2}(Ta_(1-x)Nb_x)_{1/2}}O_3$ (x=0.0∼1.0) 고용체를 단일상으로 합성하여 그 유전특성 및 B자리 양이온 질서배열구조를 조사하였다. $Pb(Fe_{1/2}Ta_{1/2})O_3$는 유전완화현상 및 완만한 상전이가 뚜렷하게 관찰되는 전형적인 완화형 강유전특성을 보였지만, $Ta^{5+}$이 $Nb^{5+}$으로 치환됨에 따라 유전완화현상은 감소하고 상전이는 급격해져 결국 $Pb(Fe_{1/2}Nb_{1/2})O_3$는 유전완화현상이 전혀 관찰되지 않는 정상 강유전특성을 보였다. Raman 분광법에 의해 $Pb(Fe_{1/2}Ta_{1/2})O_3$의 $Fe^{3+}$과 $Ta^{5+}$은 XRD는 물론 TEM의 제한시야회절패턴으로도 검출하기 어려울 정도의 단거리영역에서 화학양론적으로 1:1 질서배열하고 있으며, $Ta^{5+}$이 $Nb^{5+}$으로 치환됨에 따라 $Fe^{3+}$과 ($Ta^{5+}-Nb^{5+}$) 간의 질서배열은 약화되어 결국 $Pb(Fe_{1/2}Nb_{1/2})O_3$의 $Fe^{3+}$과 $Nb^{5+}$은 완전 무질서배열하고 있음이 밝혀졌다. $Pb(Fe_{1/2}Ta_{1/2})O_3$의 완화형 강유전특성은 B자리 양이온들이 XRD는 물론 TEM의 제한시야회절패턴으로도 검출하기 어려울 정도의 단거리영역에서 화학양론적 1:1 질서배열을 하고 있는 것과, 또 $Pb(Fe_{1/2}Ta_{1/2})O_3$의 $Ta^{5+}$이 $Nb^{5+}$으로 치환됨에 따라 완화형 강유전특성이 감소되는 것은 이 질서배열이 약화되는 것과 그리고 $Pb(Fe_{1/2}Nb_{1/2})O_3$의 정상 강유전특성은 B자리 양이온들이 완전 무질서배열을 하고 있는 것과 연관지을 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.593-596
• /
• 2003

A proposed way to prepare $YBa_2Cu_3O_y$ wires or tapes is that Ag is used as substrate and melting point of $YBa_2Cu_3O_y$ is decreased to lower than the melting point of silver ($961\;^{\circ}C$). Therefore after the deposition of $YBa_2Cu_3O_y$ film on Ag substrate, the heat treatment can be carried out below the Ag melting point. Silver (Ag) and Lead oxide(PbO) were selected to be additives for $YBa_2Cu_3O_y$. Different Ag and PbO contents were added in $YBa_2Cu_3O_y$, the melting points of which were measured by DTA. In order to guarantee that the superconductivity of $YBa_2Cu_3O_y$ was not reduced after Ag and PbO added into $YBa_2Cu_3O_y$, their superconductivities were measured. It is proved that as additives, both Ag and PbO can reduce the melting point of $YBa_2Cu_3O_y$. For Ag doped $YBa_2Cu_3O_y$, $T_c$ is about 93K and ${\Delta}Tc$ is $2{\sim}3K$. For PbO doped $YBa_2Cu_3O_y$, $T_c$ is $88K{\sim}92K$ and ${\Delta}T_c$ is $11{\sim}12K$. When 10 wt% of Ag and 10 wt% PbO were added in $YBa_2Cu_3O_y$, the melting point of the mixture of $YBa_2Cu_3O_y$ (80 wt%), Ag (10 wt%) and PbO (l0 wt%) is $943^{\circ}C$. The transition temperatures ($T_c$) of the sample is 91.8 K.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.991-1000
• /
• 1996

PbTiO$_{3}$-PbZrO$_{3}$-Pb(Ni$_{1}$3/Nb$_{2}$3/O$_{3}$) (PZT-PNN) thin films were prepared from corresponding metal organics partially stabilized with diethanolamine by the sol-gel spin coating method. Each mol ratio of PT:PZ:PNN solutions were #1(50:40:10), #2(50:30:20), #3(45:35:20), #4(40:40:20), #5(40:50:10), #6(35:45:20) and #7(30:50:20) respectively. The spin-coated PZT-PNN films were heat-treated at 350.deg. C for decomposition of residual organics, and were sintered from 450.deg. C to 750.deg. C for crystallization. The substrates, such as Pt and Pt/TiN/Ti/TiN/Si were used for the spin coating of PZT PNN films. The perovskite phase was observed in the PZT-PNN films heat-treated at 500.deg. C. The crystalline of the PZT-PNN films was optimized at the sintering of 700.deg. C. By the result of AES analysis, It is confirmed that the films of TiN/Ti/TiN was a good diffusion barrier and that co-diffusion into the each films was not observed.