• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.453-463
• /
• 1996

The chlorination of reagent PbS and natural ore galena with $NH_4Cl$ was investigated to find a new extraction metallurgical process of lead. The proper conditions for the chlorination of galena were that reaction temperature ; $425^{\circ}C$, $NH_4Cl$ weight ratio to galena ; 4.0 and reaction time ; 2hrs. Under these conditions, PbS was successfully chlorinated to $PbCl_2$ and the conversion was 90%. And also $NH_4Cl$ was effectively decomposed and was separated $NH_3$ and HCl. HCl was a chlorinating agent and 90% of $NH_3$ was recovered through this chlorination reaction.

• Electronic Materials Letters
• /
• v.14 no.6
• /
• pp.700-711
• /
• 2018

CdS synthesized by the chemical bath method at $70^{\circ}C$, has been used as an electron transport layer in the planar structure of the perovskite solar cells. A two-step spin process produced a mixed halide perovskite of $CH_3NH_3PbI_{3-x}Cl_x$ and a mixture of $PbCl_2$ and $PbI_2$ was deposited on CdS, followed by a sub-sequential reaction with MAI ($CH_3NH_3I$). The added $PbCl_2$ to $PbI_2$ in the first spin-step affected the structure, orientation, and shape of lead halides, which varied depending on the content of Cl. A small amount of Cl enhanced the surface morphology and the preferred orientation of $PbI_2$, which led to large and uniform grains of perovskite thin films. In contrast, the high content of Cl produces a new phase PbICl in addition to $PbI_2$, which leads to the small and highly uniform grains of perovskites. An improved surface coverage of perovskite films with the large and uniform grains maximized the performance of perovskite solar cells at 0.1 molar ratio of $PbCl_2$ to $PbI_2$. The depth profiling of elements in both lead halide films and mixed halide perovskite films were measured by Rutherford backscattering spectroscopy, revealing the distribution of chlorine along with the thickness, and providing the basis for the mechanism for enhanced preferred orientation of lead halide and the microstructure of perovskites.

• Journal of the Korean Ceramic Society
• /
• v.24 no.4
• /
• pp.397-403
• /
• 1987

Pb(Zr0.52Ti0.48)O3 powders were prepared by hydrothermal synthesis. Using soluble salts such as Pb(NO3)2, TiCl4 and ZrOCl2$.$8H2O and oxide such as PbO and TiO2 as starting materials, PZT powder was hydrothermally synthesized at the temperature range between 150$^{\circ}C$ and 200$^{\circ}C$. The result showed that reactivity by alkali was decreased in the sequence of Pb(NO3)2, TiCl4, ZrOCl2, PbO, TiO2 and ZrO2. Using the first three soluble salts, PZT powder was synthesiged at 150$^{\circ}C$ for 1hr. In PbO-TiCl4-ZrOCl2 system, PZT powder was synthesized at 150$^{\circ}C$ for 8rs. In Pb(NO3)2-TiO2-ZrOCl2 system, PZT powder was synthesized at 150$^{\circ}C$ for 16hrs, in PbO-TiO2-ZrOCl2 system, the powder was synthesized at 200$^{\circ}C$ for 8hrs.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.3-15
• /
• 2000

Reduction of Electric Arc Furnace dust with carbon (graphite) was studied at the temperature range of $800^{\circ}C$ to $1100^{\circ}C$ in Ar gas atmosphere. The briquetted dust with graphite powder was heated in a vertical tube furnace for given reaction time and Quenched in Ar gas atmosphere. It was found that initially the reduction of Zn was chemically controlled and the activation energy was about 120 KJ/mole. Because the almost all of Pb was removed with Cl in the form of $PbCl_2$, it is considered that Pb is removed by chloride reduction. Cu was vaporized as a chloride up to 30% of its original content, but the remaining of Cu would be accumulated with the reduced iron. and also, Cd was removed completely within 15 min. at $1000^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.3
• /
• pp.317-320
• /
• 2000

Layered $K_2NiF_4$type ($C_nH_{2n+1}NH_3)_2PbCl_4$(n=6, 8 and 10) system, or alkylammonium tetrachloroplumbate compound, has been synthesized from $PbCl_2$ and $C_nH_{2n+1}NH_3Cl$ solutions under argon ambient pressure for 12hrs at $90^{\circ}C$. The crystal structure of the compound has been analyzed using X-ray powder diffaction in the range of $5^{\circ}{\leq}2{\theta}{\leq}55^{\circ}$, and all samples assigned to an orthorhombic system. Local distances of the Pb-Cl bond have been determined by Pb $L_{III}$-edge extended X-ray absorption fine structure (EXAFS) spectroscopy. The vibration modes of alkylammonium chains and the absorpton peaks of an excition have been examined by FT-IR and UV-Vis. reflectance spectra, respectively. The phase transition temperatures of the compounds have been studied by using DSC. According to the thermal analysis, two phase transition temperatures have been observed in the compositons of n=8 and 10.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.1
• /
• pp.154-159
• /
• 2002

There are several types of salts that can be classified into raw salt(Chunil salt), purified salts(NaCl reagent grade) and processed salts(Bamboo salt, Purple bamboo salt using in this study) in Korea. Salts has been utilized for the food as well as for the drug in the Oriental Medicine. Purple bamboo salt(PB-salt) was made by heating up to 1300℃ nine times after putting the raw salts in the bamboo. Since salt is generally known to cause the blood pressure to elevate, this study was conducted to investigate the effect of PB-salt on an adverse reaction of the blood pressure elevation. The experiment was performed with the 2 protocols ; 1. Effect of NaCl and PB-salt administration i.v. with the different the concentration(250, 500, 750, 1000mg/kg) on a mean artery blood pressure(MAP) change. 2. Effect of 500mg/kg NaCl and PB-salt administration p.o. for 6 days on the systolic blood pressure change. The results were as follows; The results were as follows; In a short minute change of blood pressure by direct method, PB-salt adminstration did not induced the hypertension unlike NaCl adminstration. In a date change of blood pressure by indirect method, systolic blood pressure was increased about 12-18% in the NaCl administration group, whereas within 6% in the PB-salt administration group from 2 days to 5 days. These results suggest that PB-salt might have some unidentified ingredient to be changed in the course of processing, making it superior to other salts.

• Resources Recycling
• /
• v.6 no.1
• /
• pp.35-39
• /
• 1997

This study was carried out to find the existing forms of chlorlnc in EM dust and to understand the valaliliratian behavior and the removal of chlorine from EAF dust with lemperalure and heating almosphere The chemical compositions of dust A are 27.3%Fe. 21.8%3Zn, 3 15%Pb, 3 51%C1 and that of dust B BE 33.92%Fe, 15.94%Zn, 2.73% Pb, 3.98%Cl. The XRD analysis and water leaching test shows that chlorlne in EM dust exist mainly as NaCI, KCI, Pb (0H)Cl. Above 99% of chlorine was volatilized when dust was hentcd in alr atmosphere at 1100$^{\circ}$C h r 1 hour and that was 96% when heated in reduction atmosnherc at 1100$^{\circ}$C for 1 hour.

• Corrosion Science and Technology
• /
• v.17 no.3
• /
• pp.116-122
• /
• 2018

The secondary coolant of a nuclear power plant has small amounts of various impurities (S, Pb, and Cl, etc.) introduced during the initial construction, maintenance, and normal operation. While the concentration of impurities in the feed water is very low, the flow of the cooling water is restricted, so impurities can accumulate on the Top of Tubesheet (TTS). This environment is chemically very complicated and has a very wide range of pH from acidic to alkaline. In this study, the characteristics of the oxide and the mechanism of stress corrosion cracking (SCC) are investigated for Alloy 690 TT in alkaline solution containing Pb, Cl, and S. Reverse U-bend (RUB) specimens were used to evaluate the SCC resistance. The test solution comprises 3m NaCl + 500ppm Pb + 0.31m $Na_2SO_4$ + 0.45m NaOH. Experimental results show that Alloy 690 TT of the crevice environment containing Pb, S, and Cl has significant cracks, indicating that Alloy 690 is vulnerable to stress corrosion cracking under this environment.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.2
• /
• pp.33-41
• /
• 2018

Large amounts of leaves from street trees fall onto the streets annually and need to be cleaned and treated. Cherry trees are common street trees in Korea. The adsorption characteristics of Pb(II) by cherry leaf (CL) and cherry leaf-derived biochar (CB) were studied through a series of batch experiments. CB was produced through the carbonization of CL at $800^{\circ}C$ for 90 min. Carbonization increased the C content and pH value, while decreased H and O contents. Well developed pore structure was observed at the surface of CB. The pseudo-second order model better described the kinetics of Pb(II) adsorption onto CL and CB, indicating that the rate-limiting step of the heavy metal sorption is chemical sorption. Fast adsorption rates and high adsorption capacities were obtained by the carbonization from CL to CB. Langmuir models better adequately described the Pb(II) adsorption onto CL and CB. Maximum adsorption capacities of Pb(II) expressed by Langmuir constant, $Q^0$ were 37.31 mg/g and 94.34 mg/g, when CL and CB were used as adsorbents, respectively.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.862-870
• /
• 1994

$Pb(NO_3)_2$, $Mg(NO_3)_2$ and $NbCl_5$ were used as starting materials and made into solutions. For $Pb(Mg_{1/3}Nb_{2/3})O_3$ composition, each solution measured was mixed and heated to $70^{\circ}C$ to resolved $PbCl_2$ precipitated at lower temperature coprecipitates were formed by adding oxine and ammonia gas under pH ranging 8 to 10, and the prepared coprecipitates were filtered and washed by distilled water. The $Pb(Mg_{1/3}Nb_{2/3})O_3$ powders were synthesized by calcination of coprecipitates at the temperature range of $700^{\circ}C$ to $1000^{\circ}C$, for 5hr. The average particle size of the synthesized powders showing spherical shape was $0.3{{\mu}m}$. The powders were formed to make pellets under pressure of $2000Kg/cm^2$, and the formed pellets were sintered at the temperature range of 1100 to $1200^{\circ}C$, for 5hr. The speciman sintered at $1200^{\circ}C$ showed theoretical density of 97.4%, dielectric constatnt of 17000 at 1kHz, and dielectric loss of 0.02% at 1kHz