• Textile Coloration and Finishing
• /
• v.11 no.2
• /
• pp.27-37
• /
• 1999

Polypropylene(PP) films were treated with plasma glow discharge to produce peroxy radicals on the surfaces. The peroxy radicals formed on the PP film surfaces were subsequently used for the graft polymerization of acrylic acid and acrylamide in an aqueous solution by heating, respectively. Introduction of acrylic acid and acrylamide on the PP film could be confirmed by the observation of carbonyl and primary amine absorptions based on carboxylic acid and amide, respectively. And introduction of functional group could be confirmed by weight analysis and ESCA. The water contact angle(90$^{\circ}$) of PP film was constant, irrespective of elapsed time, while plasma-treated and functional monomer-grafted PP films were slowly increased with elapsed time, showing the rearrangement of surface polar groups in air condition. The water contact angle$(90^\circ)$ of PP film was decreased by the plasma treatment$(56^\circ)$ and further decreased by the grafting of acrylic acid$(34^\circ)$ and acrylamide$(37^\circ)$, indicating increased hydrophilicity of the modified surfaces. The water contact angle of plasma-treated PP film increased a little as time elapsing. The half-life periods of surface voltage on acrylic acid-(31sec) and acrylamide-grafted PP(42sec) were significantly decreased when compared to those on PP(950sec) and plasma-treated PP film(241sec). In the experiments using acid, basic and disperse dyes, absorbance and $\Delta{E}$ values of functional monomer-grafted PP films were significantly increased than that of oxygen plasma-treated one.

• Advances in materials Research
• /
• v.4 no.2
• /
• pp.97-111
• /
• 2015

Polypropylene short fiber (PP)-clay particulate-epoxy ternary composites were prepared by reinforcing PP short fiber and clay particles in the range of 0.1 phr to 0.7 phr into epoxy resin. Prepared hybrid composites were characterized for their mechanical, thermal and flame retardant properties. The obtained results indicated an increase in impact resistance, tensile strength, flexural strength and Young's modulus to an extent (up to 0.5 phr clay and 0.5 phr PP short fiber) and then decreases as the reinforcing phases are further increased. The thermal stability of these materials are found to increase up to 0.2 phr clay and 0.2 phr PP addition, beyond which it is decreased. Addition of clay is found to have the negative effect on epoxy-PP short fiber composites, which is evident from the comparison of mechanical and thermal properties of epoxy-0.5 phr PP short fiber composite and epoxy-0.5 phr PP short fiber-0.5 phr clay composite hybrid. UL-94 tests conducted on the composite hybrids have showed a reduction in the burning rate. Morphological observations indicated a greater fiber pull with the addition of clay. The performed tests in the present study indicated that materials under investigation have promising applications in construction, agriculture and decorative purposes.

• 발명특허
• /
• v.10 no.8 s.114
• /
• pp.65-65
• /
• 1985

식품$\cdot$약품$\cdot$화학제품의 방습 및 안전포장재로 사용되고 있는 폴리프로필렌(PP) 수축필름의 제조기술이 삼성화성공업(대표 진원호)에 의해 개발돼 양산화단계에 들어갔다. 삼성화성공업은 종래 대일수입에 의존해오던 PP 수축필름 및 플랜트의 국산화에 성공, 성남공장에서 년산 4백t 규모의 국산플랜트 준공식을 거행했는데 이 회사는 이 플랜트의 자체개발에 따라 년산 1천 2백t의 PP수축필름생산능력을 보유, 년간 6백t의 국내 수요충족은 물론 해외시장에도 본격진출할 계획이다.

• Proceedings of the KAIS Fall Conference
• /
• 2006.11a
• /
• pp.283-286
• /
• 2006

식품 포장재로 사용되는 PP/EVOH/PP 다층 복합필름의 scrap 을 재활용하기 위한 기초연구로 상용화제 첨가한 PP/EVOH/Compatibilizer 블렌드의 상용화제 종류와 첨가량에 따른 재활용 수지의 열적 특성인 용융거동과 기계적 특성인 인장강도, 파단신률, 모듈러스 등의 특성을 조사하였다. 상용화제 Monato-s와 GMS를 각각 0.2, 0.5, 0.7 % 첨가한 블렌드 조성에서의 열적 특성과 기계적 특성을 확인한 결과 두 상용화제 모두 0.5 %이상의 조성 블렌드에서 PP/EVOH의 상용성을 얻을 수 있었다.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.37-42
• /
• 2018

In order to increase the compatibility of polypropylene (PP) and kenaf fiber (KF) felt, PP/KF and PP/KF/polyurethane (PU) felt composites were prepared by treating KF with three kinds of silane coupling agents. The concentration of silane coupling agents was fixed at 1 wt%. The chemical reaction between KF and silane coupling agents was confirmed by the existence of Si-O-Si and Si-O-C functional group bands appeared on FT-IR and X-ray photoelectron spectra (XPS). Thermal properties of PP/KF composites were investigated by DSC and TGA, and the thermal stability of PP/KF composites with treated KF increased. Based on tensile, flexural and impact properties of PP/KF and PP/KF/PU composites, 1-2 wt% of (3-aminopropyl)triethoxysilane (APS) contents were the optimum formulation as a compatibilizer. The tensile and flexural strength of the felt composites treated with the silane coupling agents were improved. This is mainly due to the improvement in the compatibility between PP and KF, which was confirmed by SEM images of the fractured surfaces after tension tests.

• Journal of Life Science
• /
• v.21 no.11
• /
• pp.1625-1630
• /
• 2011

Heme oxygenase-1 (HO-1) is a stress-responsive protein that is known to regulate cellular functions such as cell proliferation, inflammation, and apoptosis. In this study, we investigated the role of NADPH oxidase on the expression of HO-1 in human liver hepatoma cell line HepG2. Diphenyleneiodonium (DPI), an NADPH oxidase inhibitor, markedly inhibited HO-1 expression and the nuclear translocation of transcription factor Nrf2 in cobalt protoporphyrin (CoPP) or hemin-treated HepG2 cells. Similarly, the knockdown of $p47^{phox}$, a cytosolic factor for NADPH oxidase activity, by siRNA inhibited the CoPP-induced expression of HO-1. In addition, GSHmee, an intracellular antioxidant, blocked the expression of HO-1 in CoPP-treated cells. Based on these results, we conclude that the blockage of NADPH oxidase with DPI or $p47^{phox}$ siRNA inhibits CoPP-induced HO-1 expression in HepG2 cells, and also suggest that the expression of HO-1 in CoPP-induced HepG2 cells is associated with increase of intracellular ROS by NADPH oxidase activity.

• Molecules and Cells
• /
• v.38 no.8
• /
• pp.697-704
• /
• 2015

Deleted in breast cancer-1 (DBC1) contributes to the regulation of cell survival and apoptosis. Recent studies demonstrated that DBC is phosphorylated at Thr454 by ATM/ATR kinases in response to DNA damage, which is a critical event for p53 activation and apoptosis. However, how DBC1 phosphorylation is regulated has not been studied. Here we show that protein phosphatase 4 (PP4) dephosphorylates DBC1, regulating its role in DNA damage response. PP4R2, a regulatory subunit of PP4, mediates the interaction between DBC1 and PP4C, a catalytic subunit. PP4C efficiently dephosphorylates pThr454 on DBC1 in vitro, and the depletion of PP4C/PP4R2 in cells alters the kinetics of DBC1 phosphorylation and p53 activation, and increases apoptosis in response to DNA damage, which are compatible with the expression of the phosphomimetic DBC-1 mutant (T454E). These suggest that the PP4-mediated dephosphorylation of DBC1 is necessary for efficient damage responses in cells.

• Food Science and Preservation
• /
• v.30 no.4
• /
• pp.562-572
• /
• 2023

In this study, we aimed to evaluate the quality of Aralia elata shoots according to different packaging methods during storage at 2℃. The highest level of dehydration and wilting incidences were observed in polypropylene containers with polyvinyl chloride wrap (PP+PVC), and these levels continually increased during the entire storage period, compared to other packaging methods. The overall marketability of A. elata shoot packaged in polyethylene terephthalate container (PET) and PP with the mineral-coted functional warp (PP+F) constantly declined during storage with a similar level of 38.6 and 36.0% at 15 days in storage, respectively. PP with PET cover packaging (PP+PET) showed the lowest decay and wilting rates during the entire storage, and the wilting score at 10th day was 51.9, 58.0, 51.8% suppressed, as compared to PET, PP+PVC, and PP+F, respectively. Consequently PP+PET packaging effectively decreased the deterioration of A. elata and maintained marketability for 10 days of storage at 2℃.

• Journal of Korean Neurosurgical Society
• /
• v.49 no.1
• /
• pp.31-36
• /
• 2011

Objective: The objectives of this study were to determine the frequency of symptomatic postdiscectomy pseudocyst (PP) after endoscopic discectomy and to compare the results of surgical and conservative management of them. Methods: Initial study participants were 1,503 cases (1,406 patients) receiving endoscopic lumbar discectomy by 23-member board of neurosurgeons from March 2003 to October 2008. All patients' postoperative magnetic resonance imaging (MRI) scans were evaluated. On the postoperative MRI, cystic lesion of T2W high and T1W low at discectomy site was regarded as PP. Reviews of medical records and radiological findings were done. The PP patients were divided into two groups, surgical and conservative management by treatment modality after PP detection. We compared the results of the two groups using the visual analogue scale (VAS) for low back pain (LBP), VAS for leg pain (LP) and the Oswestry disability index (ODI). Results: Among 1,503 cases of all male soldiers, the MRls showed that pseudocysts formed in 15 patients, about 1.0% of the initial cases. The mean postoperative interval from surgery to PP detection was 53.7 days. Interlaminar approach was correlated with PP formation compared with transforaminal approach. (p=0.001).The mean VAS for LBP and LP in the surgical group improved from 6.5 and 4.8 to 2.0 and 2.3, respectively. The mean VAS for LBP and LP in the conservative group improved from 4.4 and 4.4 to 3.9 and 2.3, respectively. There was no difference in treatment outcome between surgical and conservative management of symptomatic PP. Conclusion: Although this study was done in limited environment, symptomatic PP was detected at two months' postoperative period in about 1% of cases. Interlaminar approach seems to be more related with PP compared with transforaminal approach.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.527-534
• /
• 2006

The purpose of this study is the development of more effective filter-type polymer adsorbent for removal of anionic pollutants from wastewater. In order to synthesize the polymer adsorbent that possesses anionic exchangeable function, carboxyl(-COOH) group of PP-g-AA nonwoven fabric was converted into amine($-NH_2$) group by the chemical modification using diethylene triamine(DETA). FT-IR data indicate that amine group was introduced into PP-g-AA through amidation of grafted acrylic acid by reaction with DETA. The degree of amination increased with increase in the reaction time and temperature of the chemical modification process, and was significantly improved by the pre-swelling treatment of PP-g-AA with solvent and addition of metal chlorides as a catalyst in following order as $NH_4OH>MeOH{\geq}HCl{\geq}H_2O\;and\;AlCl_3>FeCl_3{\geq}SnCl_2{\gg}ZnCl_2{\geq}FeCl_2$, respectively. However, the addition of catalyst limited the reusability of DETA, hence was less useful from the viewpoint of cost effectiveness and waste management. The anion exchange capacity of the aminated PP-g-AA(PP-g-AA-Am) increased with increase in the degree of amination, but it reached maximum value at the degree of amination as about $50{\sim}60%$. The anion exchange capacity of PP-g-AA-Am was higher than those of commercial anion resins.