• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.141-147
• /
• 2005

LNG combustion characteristics of oxygen carrier particles were investigated in a batch type bubbling fluidized bed reactor. Three particles, NiO/bentonite, $NiO/NiAl_2O_4$, $CO_xO_y/CoAl_2O_4$, were used as oxygen carrier particles and LNG and air were used as reactants for reduction and oxidation, respectively. In the reducer, high gas conversion and high $CO_2$ selectivity were achieved for all three particles. In the oxidizer, NOx was not detected. The results of exhaust gas analysis showed that inherent $CO_2$ separation and NOx-free combustion are possible in the LNG fueled chemical-looping combustion system with NiO/bentonite, $NiO/NiAl_2O_4$ and $Ca_xO_y/CoAl_2O_4$ particles.

• 대한기계학회논문집B
• /
• 제33권12호
• /
• pp.968-976
• /
• 2009

As the global warming becomes a serious environmental problem, studies of reducing $CO_2$ emission in power generation area are in progress all over the world. One of the carbon capture and storage(CCS) technologies is known as oxy-fuel combustion power generation system. In the oxy-fuel combustion system, the exhaust gas is mainly composed of $CO_2$ and $H_2O$. Thus, high-purity $CO_2$ can be obtained after a proper $H_2O$ removal process. In this paper, an oxy-fuel combustion cycle that recovers the waste heat of a high-temperature fuel cell is analyzed thermodynamically. Variations of characteristics of $CO_2$ and $H_2O$ mixture which is extracted from the condenser and power consumption required to obtain highly-pure $CO_2$ gas were examined according to the variation of the condensing pressure. The influence of the number of compression stages on the power consumption of the $CO_2$ capture process was analyzed, and the overall system performance was also investigated.

• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1613-1618
• /
• 2014

Perovskite-type oxides are promising oxygen carriers in producing oxygen-enriched $CO_2$ gas stream for oxyfuel combustion. In this study, a new series of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ (x = 0.2, 0.4, 0.6, 0.8) was prepared and used to produce $O_2/CO_2$ mixture gas. The phase, crystal structure, and morphological properties of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ were investigated through X-ray diffraction, specific surface area measurements, and environmental scanning electron microscopy. The oxygen desorption performance of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ was studied in a fixed-bed reactor system. Results showed that the different x values of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ have no obvious effects on crystalline structure. However, the oxygen desorption performance of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ is improved by Co doping. Moreover, $SrCo_{0.8}Fe_{0.2}O_{3-{\delta}}$ synthesized via a new EDTA method has a larger BET surface area ($40.396m^2/g$), smaller particle size (48.3 nm), and better oxygen production performance compared with that synthesized through a liquid citrate method.

• 자원리싸이클링
• /
• 제16권6호
• /
• pp.10-19
• /
• 2007

폐리튬이온전지의 리싸이클링을 위하여 폐전지의 기계적 처리에 의한 Co의 농축과 습식처리에 의한 Co의 회수기술이 개발되었다. 전 연구에서는 폐전지 리싸이클링의 부가가치를 향상시키기 위하여 Co 농축 침출액으로부터 양극활물질을 재합성하는 공정으로 citrate precursor combustion법을 제안하고 가능성을 확인하였다. 기존의 전극제조 공정에서는 활물질인 $LiCoO_2$와 첨가제인 탄소의 비중 및 크기 차이로 균일한 혼합이 이루어지지 않으므로 충방전 용량이 이론용량에 비하여 매우 낮고 또한 싸이클이 반복될수록 용량이 크게 감소하는 경향을 보였다. 본 연구에서는 합성된 $LiCoO_2$ 전극특성을 향상시키는 일환으로 합성공정의 개선을 통하여 초미립 $LiCoO_2$을 합성하였으며, 탄소 첨가시 혼합법의 개선에 의하여 우수한 충방전 특성을 갖는 리튬전지용 양극을 개발하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.69-74
• /
• 2006

An Experimental study was conducted on $CO_2$ recycle combustion heating system using pure oxygen instead of conventional air as an oxidant, which is thereby producing a flue gas of mostly $CO_2$ and water vapor($H_2O$) and resulting in higher $CO_2$ concentration. The advantages of the system are not only the ability to control high temperatures characteristic of oxygen combustion with recycling $CO_2$. but also the possibility to reduce NOx emission in the flue gas. A small scale industrial reheating furnace simulator and specially designed variable flame burner were used to characterize the $CO_2$ recycle oxy-fuel combustion, such as the variations of furnace pressure, temperature and composition in the flue gas during recycle. It was found that $CO_2$ concentration in the flue gas was about 80% without $CO_2$ recycle, but increased to $90{\sim}95%$ with $CO_2$ recycle. The furnace temperature and pressure was decreased due to recycle and the NOx emission was also reduced to maintain under 100ppm.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2006년도 에너지.가스.기후변화학회 연합춘계학술대회 및 특별심포지움
• /
• pp.412-419
• /
• 2006

지구온난화의 주원인인 이산화탄소 배출 규제에 대응하기 위한 온실가스 감축 기술개발의 노력이 전 세계적으로 진행되고 있다. 따라서 본 연구에서는 배기가스 중에 $CO_{2}$를 고효율 저비용으로 회수할 수 있는 회수처리기술의 일환으로 효율성과 경제성에 맞추어, 산화제로 공기대신 순산소를 사용하는 $CO_{2}$ 재순환 산소연소 가열로시스템에 관한 실험을 수행하였다. 가재 가열용 연소로 시뮬레이터 및 화염 가변형 버너를 이용하여 $CO_{2}$ 재순환에 따른 로내 온도특성, 압력변화 그리고 배기가스특성을 비교 파악하였다. 실험결과, 배기가스의 대부분은 $CO_{2}$와 $H_{2}O$로 구성되었고, 반복재순환시 배기가스 중의 $H_{2}O$를 응축 분리시켜 고농도($90{\sim}95%$)의 $CO_{2}$를 얻을 수 있었다. 또한 온도를 제어할 수 있는 가능성을 보였고 NOx 배출도 100PPM 이하로 감소시킬 수 있었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.227-234
• /
• 2004

For gaseous fuel combustion with inherent $CO_2$ capture and low NOx emission, chemical-looping combustion(CLC) may yield great advantages of savings of energy to $CO_2$ separation and suppressing the effect on environment. In chemical-looping combustor, fuel is oxidized by metal oxide medium (oxygen carrier particle) in a reduction reactor. Reduced particles are transported to oxidation reactor and oxidized by air and recycled to reduction reactor. The fuel and the air are never mixed, and the gases from reduction reactor, $CO_2$ and $H_2O$, leave the system as separate stream. The $H_2O$ can be easily separated by condensation and pure $CO_2$ is obtained without any loss of energy for separation. The purpose of this study is to demonstrate inherent $CO_2$ separation and no NOx emission and to confirm high $CO_2$ selectivity, no side reaction (i.e., carbon deposition, hydrogen generation) by continuous reduction and oxidation experiment in a 50kWtb chemical-looping combustor. NiO/bentonite particle was used as a bed material and $CH_4$ and air were used as reacting gases for reduction and oxidation respectively.

• 청정기술
• /
• 제27권4호
• /
• pp.367-371
• /
• 2021

순산소 석탄 화력 발전 시스템은 CO₂ 가스 회수 및 저장 기술(CCS: carbon capture & storage)의 하나로 순산소와 재순환된 연소가스를 이용하여 석탄 연소를 수행하는 기술이다. 이는 이산화탄소와 질소가 혼합된 배출 가스를 생산하는 기존의 공기 연소 시스템과 달리 공기 중의 산소를 먼저 분리하여 생산된 순산소와 재순환된 연소 가스를 이용하여 석탄을 연소하면 이산화탄소와 질소를 분리하는 후처리 공정 없이 이산화탄소만으로 이루어진 배출 가스를 생성하여 이의 저장을 용이하게 하는 기술이다. 본 연구에서는 O₂/CO₂ 혼합 모의 가스를 이용하여 순산소 연소 시 발생되는 대기오염물질인 NO, SO₂의 생성 특성을 살펴보았다. 반응 온도를 900 ℃ ~ 1200 ℃, 산소 분율을 30% ~ 50%로 변화시키면서 실험한 결과 생성 가스 내 NO 및 SO₂의 농도는 반응 온도와 산소 분율이 증가할수록 증가하는 현상을 나타내었으며 CO₂의 분율도 증가하는 현상을 나타내었다. 순산소 연소에서 30% O₂/CO₂를 이용한 연소와 air 조건인 21% O₂/N₂ 연소에서 NO 발생을 비교한 결과 양쪽 모두 반응 온도에 따라서 NO 발생이 증가하게 되며 순산소 연소 조건에서 air 연소에 비하여 약 40 ~ 80 ppm까지 NO 발생이 낮아지는 현상을 나타내었다.

• 동력기계공학회지
• /
• 제6권3호
• /
• pp.17-23
• /
• 2002

The purpose of this study is to investigate the combustion emission characteristics changing auxiliary air injection in combustion field of coaxial swirling diffusion combustor. For this purpose, mean temperature, CO, CO2, O2 and HC concentration were measured by changing excess air ratio and auxiliary air injection. As a result of this study, mean temperature, CO2 emission were increased and CO emission decreased by increasing auxiliary air. Therefore, this paper showed the auxiliary air injection effected strongly on flame structure and combustion emission characteristics.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.244-249
• /
• 2004

Experiments were performed to investigate the characteristics of combustion of 7MW-3 air stages combustion system for a heavy oil firing boiler. Several fuel nozzles were developed for the purpose of lowering pollutions in another institute and ${\Phi}$-jet nozzle among them was equipped to the combustion system. A variety of combustion phenomena were observed as air stage ratio, air fuel ratio and load are changed for each nozzle. Main combustion characteristics are shape of flame, NOx and CO generations, smoke scale number. Through lots of adjustments, the combustion system reaches such goals as the low NOx of 160 ppm, CO of 300 ppm corrected at $O_2$ of 4% and dust of 150 mg/Sm3.