• Archives of Pharmacal Research
• /
• v.16 no.1
• /
• pp.32-35
• /
• 1993

Four titerpenoids were isolated from the roots of Dipsacus asper. On the basis of chemical and spectral evidence, the structures of these compounds have been elucidated to be hederagenin(1), hederagenin $3-O-\alpha-L-$arabinoside(2). $3-O-\alpha-$L-arabinopyranosyl hederagenin $2B-O-\beta$-D-glucopyranosyl ester(3) and hederagenin $28-O-\beta$-D-glucopyranosyl(1->6)-$\beta$-D-glucopyranosyl ester(4). The new glycoside, 4, was named dipsacus saponin A.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.8
• /
• pp.664-669
• /
• 2012

Nano-structured one-dimensional $Na_2Ti_6O_{13}$ particles were synthesized by a molten salt process. Effects of processing parameters on the microstructure and band gap energy of the $Na_2Ti_6O_{13}$ powder were studied in this paper. For the synthesis of the $Na_2Ti_6O_{13}$ particles, two different raw materials of tubular shaped Na-titanate (Na-TiNT) and spherical shaped $TiO_2$ were utilized. Synthesizing with the raw material of Na-TiNT, around 70nm thick 1D-$Na_2Ti_6O_{13}$ with the bandgap energy of 3.5 eV was obtained at $810^{\circ}C$. Below $810^{\circ}C$ or without the presence of NaCl, 1D-$Na_2Ti_6O_{13}$ was in a relatively short in length and agglomerated state. With the processing temperature increased, the thickness of the 1D-$Na_2Ti_6O_{13}$ was also observed to be increased. On the other hand, when $TiO_2$ was employed as a raw material, the mixed amount of $Na_2CO_3$ played an important role in transforming the morphology and phase of the raw material, affecting the bandgap energy of the synthesized product. Specific surface area of the synthesized 1D-$Na_2Ti_6O_{13}$ was significantly affected by the raw and mixed materials as well as processing temperature. When Na-TiNT was processed at $810^{\circ}C$ with NaCl, the specific surface area of the 1D-$Na_2Ti_6O_{13}$ showed the best value of 30.63 $m^2/g$.

• The Journal of the Korea Contents Association
• /
• v.15 no.11
• /
• pp.313-321
• /
• 2015

To minimize CT examination for Hip FAI diagnosis and operation plan. also, whether the MRI 3D images can replace Hip Clock face image was evaluated when performing Hip FAI MRI by using additional 3D image. This study analyzed Hip MRI and 3D Hip CT images of 31 patients in this hospital. For the purpose of evaluating the images, one orthopedic surgeon and one radiology specialist reconstructed Clock face, at MR and CT modality, by superior 12 o'clock, labrum front 3 o'clock, and the other side 9 o'clock, centering on Hip joint articular transverse ligament 6 o'clock. Afterwards, by the Likert Scale 5 point scale (independent t-test p<0.005), this study evaluated the check-up of A. retinacular vessel, B. head neck junction at 11 o'clock, A. Epiphyseal line, B. Cam lesion at 12 o'clock, and Cam lesion, Posterior Cam lesion at 1,2,3 and 4 o'clock. As for the verification of reliability among observers, this study verified coincidence by Cohen's weighted Kappa verification. As a result of Likert scale for the purpose of qualitative evaluation about the image, 11 o'clock A. retinacular vessel MR average was $3.69{\pm}1.0$ and CT average was $2.8{\pm}0.78$. B. head neck juncton didn't have a difference between two observers (p <0.416). 12 o'clock A. Epiphyseal line MR average was $3.54{\pm}1.00$ and CT average was $4.5{\pm}0.62$(p<0.000). B. Cam lesion didn't have a difference between two observers (p <0.532). 1,2,3,4 Cam lesion and Posterior Cam lesion were not statistically significant (p <0.656, p <0.658). As a result of weighted Kappa verification, 11 o'clock A.retinacular vessel CT K value was 0.663 and the lowest conformity. As a result of coincidence evaluation on respective item, a very high result was drawn, and two observers showed high reliability.

• Journal of Korea Foresty Energy
• /
• v.21 no.1
• /
• pp.41-48
• /
• 2002

The barks of oak trees (Quercus acutissima and Quercus variabilis) were collected, extracted with acetone-$H_2O$ (7:3, v/v), fractionated with hexane, $CH^2C1^2$ EtOAc and -$H_2O$, then freeze dried to give dark brown powder. The EtOAc soluble mixtures of the trees were chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluents. The structures of isolated compounds were characterized by $^1H$, $^13C$ and 2D-NMR spectroscopy and molecular weights were determined by FAB-MS spectra. The isolated compounds from Quercus acutissima were (+)-catechin, (+)-gallocatechin, gallic acid and taxifolin-3-O-$\beta$-D-glucopyranoside and the compounds from Quercus variahilis (+)-catechin, caffeic acid and taxifolin-3-O-$\beta$-D-glucopyranoside.

• KSBB Journal
• /
• v.13 no.6
• /
• pp.675-680
• /
• 1998

In both 7L and 20L fermentor experiments the level of dissolved oxygen (D.O) strongly affected growth and PHBV production of Azotobacter vinelandii UWD. A higher D.O. increased carbon substrate consumption rate and cell growth rate with a similar residual biomass production. However, a lower D.O. was a much better condition for PHBV production. In a 20L fermentor experiments controlled at 5% D.O. cell growth rate was about twice faster(0.555 hr-1 and 0.260 hr-1 at the acid and the glucose phase, respectively) with an equal amount(4.5 g/L) of residual biomass production. However, PHBV content in the cell(62.3 wt%) increased 17.3 times at 1% D.O.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.559-562
• /
• 2002

본 논문에서는 최근 제한적으로 사용이 승인된 UWB(초광대역： Ultra-Wideband) 통신을 AWGN 하에서 다중 접속을 고려하지 않은 단일 사용사일 경우로 가정시, M진 값이 변화함에 따른 에러율과 성능 개선 기법으로 BCH를 채용시의 에러율을 비교 분석하였다. 기존에 연구되어 오던 변조로 PAM(Pulse Amplitude Modulation)과 PPM(Pulse Position Modulation)방식을 비교하였으며 에러율 $10^{-6}$을 기준으로 M=2, 4일 경우 PAM이 PPM보다 약 E$_{b}$/N$_{o}$ =3~4［dB］, M=8 이상의 경우 PPM이 약 E$_{b}$/N$_{o}$ =9［dB］, M=16일 경우 약 E$_{b}$/N$_{o}$ =15［dB］정도 성능이 우수하였다. AWGN 채널 하에서 에러 정정 부호인 BCH(15,7)를 도입하였을 경우 에러율 $10^{-6}$을 기준으로 PAM방식은 약 E$_{b}$/N$_{o}$ 가 약 1［dB］, PPM 방식은 M=2, 4일 경우 약 E$_{b}$/N$_{o}$ =1~1.5［dB］정도 개선되었다.

• Archives of Pharmacal Research
• /
• v.25 no.3
• /
• pp.313-319
• /
• 2002

A total of eight flavonoids (1-8), including a novel $quercetin-7-o-(6"-o-acetyl)-{\beta}-D-glucopyranoside$ (6) and seven known flavonoids, luteolin (1), quercetin (2), luteolin $7-o-{\beta}-D-glucopyranoside$ (3), $luteolin-7-o-(6"-Ο-acetyl)-{\beta}-D-glucopyranoside$ (4) quercetin $7-o-{\beta}-D-glucopyranoside$ (5), acacetin 7-o-{\beta}-D-glucuronide (7) and apigenin-6-C-{\beta}-D-glucopyrano $syl-8-C-{\beta}-D-glucopyranoside$ (8), have been isolated from the leaves of the safflower (Carthamus tinctorius L.) and identified on the basis of spectroscopic and chemical studies. The antioxidative activity of these flavonoids was evaluated against 2-deoxyribose degradation and rat liver microsomal lipid peroxidation induced by hydroxyl radicals generated via a Fenton-type reaction. Among these flavonoids, luteolin-acetyl-glucoside (4) and quercetin-acetyl-glucoside (6) showed potent antioxidative activities against 2-deoxyribose degradation and lipid peroxidation in rat liver microsomes. Luteolin (1), quercetin (2), and their corresponding glycosides (3 & 5) also exhibited strong antioxidative activity, while acacetin glucuronide (7) and apigenin-6,8-di-C-glucoside (8) were relatively less active.

• Publications of The Korean Astronomical Society
• /
• v.8 no.1
• /
• pp.119-136
• /
• 1993

Optimum hypering conditions are found for IIIa-J, IIIa-F, 103a-O, 103a-D, and IIa-O plates using hypersensitization machine in KAO. For every experimental plate we get speed gain, fog increment, signal to noise ratio and relative DQE according to hypering time and temperature. The hypersensitization method is baking with 8% hydrogen mixed gas. For IIIa-J, 103a-O, and 103a-D plates treated $65^{\circ}C$, 3 hours baking, the speed gains arc increased by about 10 times, 2 times, and 2 times compared to untreated plates, respectively. The fogs are increased by 0.08, 0.10, and 0.08, respectively. For IIIa-F, IIa-O plates treated $65^{\circ}C$, 2 hours baking, the speed gains are increased by about 4.7 times and 1.8 times compared to untreated plates, respectively. The fogs are increased by 0.15 and 0.04, respectively.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1003-1007
• /
• 1999

This paper is reported for the stability of ZnO-$Pr_{6}O_{11}-CoO-Er_{2}O_{3}$ based ceramic varistors with $Er_{2}O_{3}$ added in the addition range 0.0 to 2.0 mol%. The varistors sintered at $130^{\circ}C$ exhibited abrupt positive current creep phenomena, which accompany thermal run away within short times, even under weak d.c. stress. As a result, these varistors were completely degraded. On the contrary, the stability of varistors sintered at $1350^{\circ}C$ was far better than that of $1300^{\circ}C$. In particular, the varistor containing 0.5 mol% $Er_{2}O_{3}$ showed a excellent stability, which the variation rate of the varistor voltage, the nonlinear coefficient, and leakage current is below 1%, 2%, and 3.5%, respectively, even under more severe d.c. stress, such as ($0.8V_{1mA}/90^{\circ}C/12h$) + ($0.85V_{1mA}/115^{\circ}C/12h$) + ($0.9V_{1mA}/120^{\circ}C/12h$) + ($0.9V_{1mA}/150^{\circ}C/12h$). Consequently, it is estimated that the basic composition of ZnO-$Pr_{6}O_{11}-CoO-Er_{2}O_{3}$ based varistor contain 0.5 mol% $Er_{2}O_{3}$ will be used to the fabrication of the varistors for high performance and stability in a forthcoming.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.29-35
• /
• 2016

We have demonstrated a $Ti:LiNbO_3$ electro-optic electric-field sensors utilizing a $1{\times}2$ Y-fed balanced-bridge Mach-Zehnder interferometric (YBB-MZI) modulator which uses a 3-dB directional coupler at the output and dipole patch antenna. The operation and design were proved by the BPM simulation. A dc switching voltage of ~16.6 V and an extinction ratio of ~14.7 dB are observed at a wavelength of $1.3{\mu}m$. For a 20 dBm rf power, the minimum detectable electric-fields are ~1.12 V/m and ~3.3 V/m corresponding to a dynamic range of about ~22 dB and ~18 dB at frequencies 10 MHz and 50 MHz, respectively. The sensors exhibit almost linear response for the applied electric-field intensity from 0.29 V/m to 29.8 V/m.