• Journal of the Korean Chemical Society
• /
• v.53 no.1
• /
• pp.90-94
• /
• 2009

• Journal of the Korean Chemical Society
• /
• v.56 no.4
• /
• pp.448-458
• /
• 2012

In order to develop alloy resistance in aggressive sulphat ion, the corrosion behavior of metallic glasses $Ni_{92{\cdot}3}Si_{4.5}B_{32}$, $Ni_{82,3}Cr_7Fe_3Si_{4.5}B_{3.2}$ and $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$ (at %) at different concentrations of $H_2SO_4$ solutions was examined by electrochemical methods and Scanning Electron Microscope (SEM) and X-ray Photoelectron Microscopy (XPS) analyses. The corrosion kinetics and passivation behavior was studied. A direct proportion was observed between the corrosion rate and acid concentration in the case of $Ni_{92{\cdot}3}Si_{4.5}B_{32}$ and $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$ alloys. Critical concentration was observed in the case of $Ni_{82,3}Cr_7Fe_3Si_{4.5}B_{3.2}$ alloy. The influence of the alloying element is reflected in the increasing resistance of the protective film. XPS analysis confirms that the protection film on the $Ni_{92{\cdot}3}Si_{4.5}B_{32}$ alloy was NiS which is less protective than that formed on Cr containing alloys. The corrosion rate of $Ni_{82,3}Cr_7Fe_3Si_{4.5}B_{3.2}$ and $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$. alloys containing 7% and 13% Cr are $7.90-26.1{\times}10^{-3}$ mm/y which is lower about 43-54 times of the alloy $Ni_{92{\cdot}3}Si_{4.5}B_{32}$ (free of Cr). The high resistance of $Ni_{75.5}Cr_{13}Fe_{4.2}Si_{4.5}B_{2.8}$ alloy at the very aggressive media may due to thicker passive film of $Cr_2O_3$ which hydrated to hydrated chromium oxyhydroxide.

• Journal of the Korean Society of Tobacco Science
• /
• v.2 no.2
• /
• pp.20-37
• /
• 1980

Among the 34 strains of Nicotinophiles selected in the previous experiments, strain NCT27 identified with Pseudomonas putida and strain NCT30 identified with Arthrobacter oxydans biotype nan thus were Investigated for optimization of growth conditions for nicotine degradation and other cultural characteristics. The compositions of optimized medium were to be following: $KH_2PO_4$ 2.Ogr, KCI 5.Ogr, $MgSO_4$.$7H_2O$ 20mg, $MnSO_4$.$6H_2O$ 0.2mg, $FeSO_4$.$7H_2O$ 1.Omg, Col$^{++}$ (Cobalt Acetate),2.O$\gamma$, N1$^{++}$ (NiSO4,6H2O) 0.5$\gamma$, and yeast extract 80mg per liter. The optimum initial concentrations of nicotine for growth were 0.4% for Pseudomonas and 0.1% for Arthrobacter, respectively. The optimum temperature and pH were 3$0^{\circ}C$ and 7.0 for both of strains. The pH of culture medium of Pseudomonas was changed from acidic condition to basic one in going from the logarithmic growth phase to the stationary growth phase. In contrast with Pseudomonas, it remained constant in case of Arthrobacter. The growth of Arthrobacter was completely inhibited in the nicotine concentration of 0.7&. However, Pseudomonas could grow even in the nicotine concentration of 1.0%. Moreover, it could grow successfully in the tobacco extract media as well as media containing carbon and nitrogen sources other than nicotine. The maximum rates of nicotine degradation were to be 1.22 gr./hr./liter for Pseudomonas and 0.186 gr./hr./liter for Arthrobacter, respectively.

• Journal of Industrial Technology
• /
• v.39 no.1
• /
• pp.15-19
• /
• 2019

This work focused on characterization of the starch degradation activity from extremophile strain Deinococcus geothermalis. Glucoamylase gene from D. geothermalis was cloned and overexpressed by pET-21a vector using E. coli BL21 (DE3). In order to characterize starch degrading activity of recombinant glucoamylase, enzyme was purified using HisPur Ni-NTA column. The recombinant glucoamylase from D. geothermalis exhibited the optimum temperature as $45^{\circ}C$ for starch degradation activity. And highly acido-stable starch degrading activity was shown at pH 2. For further optimization of starch degrading activity with metal ion, various metal ions ($AgCl_2$, $HgCl_2$, $MnSO_4{\cdot}4H_2O$, $CoCl_2{\cdot}6H_2O$, $MgSO_4$, $ZnSO_4{\cdot}7H_2O$, $K_2SO_4$, $FeCl_2{\cdot}4H_2O$, NaCl, or $CuSO_4$) were added for enzyme reaction. As results, it was found that $FeCl_2{\cdot}4H_2O$ or $MnSO_4{\cdot}4H_2O$ addition resulted in 17% and 9% improved starch degrading activity, respectively. The recombinant glucoamylase from D. geothermalis might be used for simultaneous saccharification and fermentation (SSF) process at high acidic conditions.

• Korean Journal of Materials Research
• /
• v.23 no.11
• /
• pp.661-665
• /
• 2013

We investigated the characteristics of electroless plated Cu films on screen printed Ag/Anodized Al substrate. Cu plating was attempted using neutral electroless plating processes to minimize damage of the anodized Al substrate; this method used sodium hypophosphite instead of formaldehyde as a reducing agent. The basic electroless solution consisted of $CuSO_4{\cdot}5H_2O$ as the main metal source, $NaH_2PO_2{\cdot}H_2O$ as the reducing agent, $C_6H_5Na_3O_7{\cdot}2H_2O$ and $NH_4Cl$ as the complex agents, and $NiSO_4{\cdot}6H_2O$ as the catalyser for the oxidation of the reducing agent, dissolved in deionized water. The pH of the Cu plating solutions was adjusted using $NH_4OH$. According to the variation of pH in the range of 6.5~8, the electroless plated Cu films were coated on screen printed Ag pattern/anodized Al/Al at $70^{\circ}C$. We investigated the surface morphology change of the Cu films using FE-SEM (Field Emission Scanning Electron Microscopy). The chemical composition of the Cu film was determined using XPS (X-ray Photoelectron Spectroscopy). The crystal structures of the Cu films were investigated using XRD (X-ray Diffraction). Using electroless plating at pH 7, the structures of the plated Cu-rich films were typical fcc-Cu; however, a slight Ni component was co-deposited. Finally, we found that the formation of Cu film plated selectively on PCB without any lithography is possible using a neutral electroless plating process.

• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.979-983
• /
• 2009

The mean pH of wastewater discharged from the plating process is 2, so a less amount of alkali is required to raise pH 2 to 5. In addition, if sodium sulfite is used to raise pH 5 to 9 in the secondary treatment, caustic soda or slaked lime is not necessary or only a small amount is necessary because sodium sulfite is alkali. Thus, it is considered desirable to use only $FeSO_4{\cdot}7H_2O$ in the primary treatment. At that time, the free cyanide removal rate was highest as around 99.3%, and among heavy metals, Ni showed the highest removal rate as around 92%, but zinc and chrome showed a low removal rate. In addition, the optimal amount of $FeSO_4{\cdot}7H_2O$ was 0.3g/L, at which the cyanide removal rate was highest. Besides, the free cyanide removal rate was highest when pH value was 5. Of cyanide removed in the primary treatment, the largest part was removed through the precipitation of ferric ferrocyanide: $[Fe_4(Fe(CN)_6]_3$, and the rest was precipitated and removed through the production of $Cu_2[Fe(CN)_6]$, $Ni_2[Fe(CN)_6]$, CuCN, etc. Furthermore, it appeared more effective in removing residual cyanide in wastewater to mix $Na_2SO_3$ and $Na_2S_2O_5$ at an optimal ratio and put the mixture than to put them separately, and the optimal weight ratio of $Na_2SO_3$ to $Na_2S_2O_5$ was 1:2, at which the oxidative decomposition of residual cyanide was the most active. However, further research is required on the simultaneous removal of heavy metals such as chrome and zinc.

• Journal of Life Science
• /
• v.16 no.2 s.75
• /
• pp.245-252
• /
• 2006

A bacterial strain, identified as Staphylococcus aureus JJ-11, producing collagenase was isolated out of 40 persons having skin troubles. S. aureus JJ-11 produced collagenase optimally in the media containing 1.5%(w/v) gelatin, 1%(w/v) yeast extract, 0.4%(w/v) $K_2HPO_4$, 0.005%(w/v) $NiSO_4{\cdot}6H_2O$ at $37^{\circ}C$ for 18 hrs. The collagenase produced by Staphylococcus aureus JJ-11 was purified at 6.66-folds purity through application of chromatography with Amberlite IRA-900 and Sephacryl S-300 HR columns. The molecular weight of the partially purified enzyme was estimated to be 62 kDa by SDS-PAGE. The protein exhibited optimum enzymatic activity at pH 7.0, and showed a stable activity at pH 4-8. The optimum temperature for collagenase was at $37^{\circ}C$, and activity was maintained upto $40^{\circ}C$. The enzyme activity was slightly elevated in the presence of divalents such as, $Fe^{2+},\;Co^{2+}\;and\;Ba^{2+}$ However, the activity was inhibited in the presence of $Sr^{2+}\;or\;Hg^{2+}$. The inhibition of activity by O-phenanthroline and EDTA suggested that the enzyme may contain metal which is required for activity. The enzyme showed the highest activity when insoluble collagen (type I) was, used as a substrate.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.150-157
• /
• 2006

The alternate plating method was suggested by a tin-cobalt alloy plating process which has excellent mechanical characteristics and also favorable to environment. Tin-cobalt alloy plating has many advantages such as nontoxicity, variable color-tone, and no post-treatment process. In this study, the plating conditions such as temperature, pH, current density, plating time, and amount of additive (glycine) were determined in the tin-cobalt alloy plating process through Hull-cell test and surface analysis. As the result of Hull-cell analysis, brightness became superior as the amount of glycine increased. It was found that the optimum alloy ratio was 0.03 M of $SnCl_{2}{\cdot}2H_{2}O$ and 0.05 M of $CoSO_{4}{\cdot}7H_{2}O$ at $50^{\circ}C$, pH 8.5, and $0.5A/dm^2$. The optimum amount of additive was 15 g/L of glycine and 0.1 g/L of organic acid. Then, the solution including glycine was recommended as an optimum plating solution for a chromium plating process.