• 한국광학회지
• /
• 제4권1호
• /
• pp.84-89
• /
• 1993

Mg(4 mole%):LiNb$O_3$에서 제 2고조파발생특성을 온도와 직류전장의 함수로 측정하여, Mg:LiNb$O_3$ 결정의 공간적 균일성을 조사 하였다. 발생된 제2고조파및의 세기가 위상정합된 상태의 최대값으로부터 최초로 0이 되는 온도가 결정의 광축으로 가해준 직류전장의 변화에 선형적으로 변위함을 관찰하였다. 이로부터, 최초로 Mg가 4mole% 첨가된 Mg:LiNb$O_3$ 의 전기광계수가 Congruent LiNb$O_3$의 해당하는 값보다 1.5배가 더 큼을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.127-130
• /
• 2001

The $BaTiO_3+xNb_2O_5$(x=6, 8, 10wt%) ceramics were prepared by conventional mixed oxide method. The structural properties of the $BaTiO_3+Nb_2O_5$ ceramics with the sintering temperature and addition of $Nb_2O_5$ were investigated by XRD and SEM. Increasing the sintering temperature, the $2{\theta}$ value of BT(110) peak was shifted to the lower degree and intensity of the $Ba_6Ti_2Nb_8O_{30}$ (133) peak was increased. Increasing the addition of $Nb_2O_5$, the intensity of $BaTiNb_4O_{13}$ (201) peak was decreased and $Ba_6Ti_2Nb_8O_{30}$ (133) peak was increased. The grain size of the $BaTiO_3+Nb_2O_5$ ceramics sintered at $1500^{\circ}C$ were almost uniform.

• 한국세라믹학회지
• /
• 제28권5호
• /
• pp.422-428
• /
• 1991

The reaction sintering of Al2O3-ZrO2-Nb composite has been investigated using Al2O3, and ZrAl2 powders. Two kinds of specimens, 78.3Al2O3-14.0Nb2O5-7.7ZrAl2 in wt.% (AZN-5) and 72.3Al2O3-13.8Nb2O5-7.5ZrAl2-6.4ZrO2(AZN-10), were prepared. Powder compacts were sintered at various temperatures between 1$600^{\circ}C$ and 1$700^{\circ}C$ for 30 min in Ar. DTA and X-ray analysis have showen that a reaction between Nb2O5 and ZrAl2 started at 149$0^{\circ}C$ to form Al2O3, ZrO2, and Nb. The sintered density increased with the sintering temperature. AZN-10 specimen showed higher density than AZN-5 specimen for almost all the experimental conditions. Al2O3-ZrO2-Nb composite hot pressed after reaction sintering showed higher toughness and lower hardness than hot pressed Al2O3-ZrO2. The crack propagated through many metallic Nb particles which showed plastic deformation, and this is the cause of the increase in toughness of Al2O3-ZrO2-Nb composite over Al2O3-ZrO2.

• 한국세라믹학회지
• /
• 제19권4호
• /
• pp.267-274
• /
• 1982

The sintering behavior and B-H loop properties of $Li_{0.5O4}$ with the addition of $Nb_2O_5$ and $V_2O_5$ have been investigated by observation of microstructures and measurement of semi-static hysteresis loops. The sintering temperature was lowered by the additions of $Nb_2O_5$ and $V_2O_5$ and the effect of $V_2O_5$ addition was greater than that of $Nb_2O_5$. The abnormal grain growth was observed at about 100$0^{\circ}C$(d:4.6g/㎤) and 85$0^{\circ}C$(d:4.5g/㎤) in the specimens with the addition of $Nb_2O_5$ and $V_2O_5$ respectively. The addition of $Nb_2O_5$ retulted in a large and uniform grain size, and the addition of $V_2O_5$ resulted in a uniform grain size but the final density was lower than that of the pure specimen. The squareness was increased and the coercive force was decreased by the addition of $Nb_2O_5$, and the squareness was decreased and the coercive force was increased by the addition of $V_2O_5$. These effects could be explained by a large and uniform grain size, and by a lower final density of specimens with the addition of $Nb_2O_5$ and $V_2O_5$ respectively.

• 한국세라믹학회지
• /
• 제38권1호
• /
• pp.56-60
• /
• 2001

90.24 mol% ZrO$_2$-5.31 mol% $Y_2$O$_3$-4.45 mol% Nb$_2$O$_{5}$ 조성의 (Y,Nb)-TZP와 (Y,Nb)-TZP/Al$_2$O$_3$복합체를 155$0^{\circ}C$~1$600^{\circ}C$에서 1~2시간 소결하여 제조하였다. 시편의 결함에 대한 저항성을 조사하기 위하여 R-curve, Weibull modulus, slow crack growth 변수 등을 조사하였다. 실험결과, (Y,Nb)-TZP와 (Y,Nb)-TZP/Al$_2$O$_3$복합체 모두 상용 3Y-TZP 보다 우수한 결함 저항성이 관찰되었다. (Y,Nb)-TZP/Al$_2$O$_3$복합체의 결함 저항성은 $Al_2$O$_3$첨가에 의한 결정립 가교 인화, 분산강화, R-curve 효과에 의한 것으로 추정된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.439-442
• /
• 2004

The effects of sintering additives on the low-temperature sintering and microwave dielectric properties of $Mg_4Nb_2O_9$ dielectric ceramics were studied. When $3{\sim}20wt%$ of $0.242Bi_2O_3-0.758V_2O_5$ was added, the sintering temperature decreased from $1100{\sim}1300^{\circ}C$ to $950^{\circ}C$ and high density was obtained. When $Mg_4Nb_2O_9$ was sintered at $950^{\circ}C$ with 10wt% of sintering additive, the microwave dielectric properties of $Q{\times}f_0\;=\;80.035GHz,\;\epsilon_r\;=\;13.3\;and\;\tau_f\;=\;-12.9\;ppm/^{\circ}C$ were obtained.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.42.2-42
• /
• 2003

• 한국결정성장학회지
• /
• 제7권3호
• /
• pp.377-383
• /
• 1997

이트리아 안정화 지르코니아(Y-TZP)에 5가 산화물$(Ta_2O_5,\;Nb_2O_5)$을 첨가하여 $1500^{\circ}C$온도에서 상압소결한 삼성분계중 quasi-binary system인 $ZrO_2-YTa(Nb)O_4$의 조성영역안에서 상 안정성을 관찰하기 위해 상태도를 작성하였으며, 결정립 크기나 annealing 온도에 상관없이 상 안정성을 유지하는 non-transformable $t-ZrO_2$ solid solution$(NT_{ss}$ )영역을 확인하고 안정화 mechanism을 조사하였다. $NT_{ss}$ 의 상 안정성은 정방정 fergusonite 구조를 갖는 $YTa(Nb)O_4$의 안정화로 상 변태를 억제하여 우수한 상 안정성을 유지하는 것으로 추정되었다. 기계적 특성을 향상시키기 위해 상 변태율이 가장 좋은 transformable-TZP $(T_{ss/})$ 를 에 첨가하여 조사한 결과 mixture의 조성이 $NT_{ss}$ 영역밖의 $NT_{ss}$영역에 위치하여도 상 안정성과 우수한 기계적 특성을 갖는다는 것이 발견되었다.

• 한국세라믹학회지
• /
• 제35권5호
• /
• pp.458-464
• /
• 1998

Variations of reaction sequence of $Pb(Zn_{0.6}Mg_{0.4})_{1/3}Nb_{2/3}O_3$[PZMN] with precusor mixing methods were ex-amined using X-ray diffraction and dielectric characteristics. In the present study three different types of precursor mixing methods (oxide mixing PbO+$ZnNb_2O_6+MgNb_2O_6$[Zn+MN] and PbO+(Zn,Mg)$Nb_2O_6$[ZMN] precursor mixing) were adopted. When the oxide mixing method was used for the PZMN synthesis a Zn-rich perovskite phase and pyrochlore phase were formed. Compared with PbO+ZN+MN precursor mixing method the PbO-ZMN precursor led to a lowering of the formation temperature for perovskite sin-gle phase. These variation of composition and formation temperature of the perovskite phase were dis-cussed in terms of the difference in the solid-reaction requence between these three different types of pre-cursor mixing.

• 한국세라믹학회지
• /
• 제36권3호
• /
• pp.325-331
• /
• 1999

SrWO4가 첨가된 (Sr1-xBax)(Mg1/3Nb2/3)O3의 마이크로파 유전특성에 관하여 조사하였다. 관찰된 조성영역에서 Sr(Mg1/3Nb2/3)O3과 Ba(Mg1/3Nb2/3)O3은 (Sr1-xBax)(Mg1/3Nb2/3)O3고용체를 형성하고 SrWO4의 첨가는 고용체의 소결성을 향상시켜 소결온도 155$0^{\circ}C$에서 상대밀도 97% 이상을 얻었다. 소결한 시편의 EDS분석결과, SrWO4의 첨가량이 많은 시편에서 2차상이 존재하는 것을 알수 있었다. 순수한 Sr(Mg1/3Nb2/3)O3에 SrWO4를 0.01 mole첨가하여 1550~1$600^{\circ}C$에서 소결한 시편의 유전특성은 $\varepsilon$r 30, Q$\times$fo$\geq$55000,$ au$f -23 ppm/$^{\circ}C$이었다. 0.01 mole SrWO4가 첨가된 (Sr1-xBax)(Mg1/3Nb2/3)O3 고용체의 유전율과 온도계숙가 x에 따라 점차적으로 계속 증가하였고 Q$\times$fo는 x$\leq$0.25에서 x에 따라 감소하고 x$\geq$0.3에서 다시 증가하였다. (Sr0.65Ba0.35)(Mg1/3Nb2/3)O3+0.01SrWO4의 조성을 갖는 시편에서 $\varepsilon$r 34.4, Q$\times$fo$\geq$55000,$\tau$f 0 ppm/$^{\circ}C$이었다.