• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.320-331
• /
• 1997

ZSM-5 was crystallized at low temperature and atmospheric pressure using reflux unit. The overall molar composition used in this study was $7.83Na_2O-0.25Al_2O_3-100SiO_2-xTPABr-yH_2O$ where x is 1 and 3 mol, and y is 3000 mol, 3500 mol, and 4000 mol. $2^3$ factorial experiments were performed with the results of kinetics studies, showing $Na_2O$, TPABr, and $H_2O$ as main factors. The result suggested that the concentration of $H_2O$ is the most important. The morphology of final product was very uniform showing well-defined crystals with BET surface area of ca. $410m^2/g$.

• KSBB Journal
• /
• v.20 no.5 s.94
• /
• pp.350-354
• /
• 2005

In order to maximize hydrogen production by Enterobacter cloacae YJ-1, anaerobic hydrogen producing bacteria, the medium composition was optimized. Glucose was better than other carbon sources in hydrogen production and its production was 975.4 mL/L at $2\%$ (w/v) for 48 h. Organic nitrogen sources were more effective than inorganic nitrogen sources and also yeast extract among organic nitrogens was the most effective in hydrogen production. Among metal ions, $Na_2MoO_4$ was most effective, and its production was 1753.3mL/L at $0.04\%$ (w/v). Addition of amino acid was very effective with compare to another components of medium, and cystein was most effective among them. Under the optimum medium obtained in batch culture, semi-batch culture in order to produce continuous hydrogen was run. The highest hydrogen production was earned at $3\%$(w/v) of glucose and the amount was 2215.4 mL/L.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.5
• /
• pp.254-259
• /
• 2003

In the fabrication process of transparent conducting thin films of the ATO (antimony-doped tin oxide) on a soda lime glass substrate by a sol-gel dip coating method, the effects of the $SiO_2$ buffer layer formed on the substrate and $N_2$ annealing treatment were investigated by XPS (X-ray photoelectron spectroscopy) analysis. Optical transmittance and electrical resistivity of the 400 nm-thick ATO thin films which were deposited on $SiO_2$ buffer layer/soda lime glass and then annealed under nitrogen atmosphere were 84 % and $5.0\times 10^{-3}\Omega \textrm{cm}$ respectively. The XPS analysis confirmed that a $SiO_2$ buffer layer inhibited Na ion diffusion from the substrate, resulting in prohibiting the formation of a secondary phase such as $Na_2SnO_3$ and SnO and increasing Sb ion concentration and ratio of $Sb^{5+}/Sb^{3+}$ in the film. And it was also found that $N_2$ annealing treatment leads to the reduction of $Sn^{4+}$as well as $Sb^{5+}$ however the reduction of $Sn^{4+}$ is more effective and therefore consequently results in decrease in the electrical resistivity to produce an excellent electrical properties of the film.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.99-107
• /
• 1997

This study Provides the treatment methods of liquid wastes from the dissolution/purification process of nuclear fuel raw material and the fabrication process of nuclear fuel powder. One of the treatment methods is to process liquid waste from uranium raw material dissolution/purification process. This waste, of the strong acid, can be reused to dissolve the fine ADU particles in filtrate which is ADU waste of pH 8.0 converted from AUC waste after recovery of uranium. To dissolve the fine ADU particles, ADU filtrate was pretreated to pH 4.0 with the dissolution/purification waste, and then mixed with the lime to pH 9.2 and aged for 30 minutes. From this processing, uranium content of the filtrate was decreased to below 3ppm. The waste from fuel powder fabrication is emulsified solution dispersed with fine oil droplets. This emulsion was destroyed effectively by adding and mixing the nitric acid with rapid heating at the same time. After this processing, $Na_2U_2O_7$ compound is produced by addition of NaOH. Optimum condition of this processing was shown at pH 11.5, and uranium content of the filtrate was analyzed to 5ppm. To remove the trace of uranium in the filtrate, lime should be added. Otherwise, 4N nitric acid was used to destroy the emulsion directly, and then lime was added to this waste. Uranium content of the treated filtrate was below 1 ppm. In addition to these wastes, the trace of uranium in filtrate after recovery of uranium from the AUC waste which is produced during PWR power preparation, is treated with NaOH to takeup fluorine(F) in the waste because fluorine is valuable and toxic material. In the finally treated waste, uranium was not detected.

• Journal of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.600-605
• /
• 1990

Electron injection from excited rose bengal into the conduction band of a thin film of SnO$2$, semiconductor was investigated in an electrochemical cell, ITO/SnO$2$/rose bengal, NaClO$4$/Pt. It was observed that urea enhanced the supersensitized photocurrent, followed by the reduction in the photocurrent after a shallow maximum. Spectroscopic analyses of the dye solution containing urea revealed that dye aggregation appeared to be involved in the increased photocurrent, although the concentration of the dye was continuously decreased dye to photochemical reactions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6187-6195
• /
• 2012

Recycling process of iron should be developed for efficient recovery of neodymium(Nd), rare metal, from acid-leaching solution of neodymium magnet. In this study, $FeCl_3$ solution as iron source was used for synthesis of iron nanoparticle with the condition of various factors, etc, reductant, surfactant. $Na_4O_7P_2$ and polyvinylpyrrolidone(PVP) as surfactants, $NaBH_4$ as reductant, and palladium chloride($PdCl_2$) as a nucleation seed were used. Iron powder was analyzed with instruments of XRD, SEM and PSA for measuring shape and size. Iron nanoparticles were made at the ratio of 1 : 5(Fe (III) : $NaBH_4$) after 30 min of reduction time. Size and shape of iron particles synthesized were round-form and 50 nm ~ 100 nm size. Zeta-potential of iron at the 100 mg/L of $Na_4O_7P_2$ was negative value, which is good for dispersion of metal particle. When $Na_4O_7P_2$(100 mg/L), PVP($FeCl_3$ : PVP = 1 : 4, w/w) and Pd($FeCl_3$ : $PdCl_2$ = 1 : 0.001, w/w) were used, iron nanoparticles which are round-shape, well-dispersed, near 100 nm-sized can be made.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.221-222
• /
• 2009

AZ31 마그네슘 합금에 AC 전류를 인가하여 MAO(micro-arc oxidation) process로 양극산화 할 때 알카리 전해액에 첨가되는 sodium silicate(Na2SiO3)의 농도에 따라 형성되는 양극 피막의 구조와 부식특성을 평가하였다. 전해질의 조성은 10g/1 KOH와 4g/1 KF 혼합 전해액에 sodium silicate를 (5, 10, 20, 40, 80)g/1로 달리하여 첨가한 후 $40mA/cm^2$의 전류밀도로 20분간 MAO 처리한 후 양극피막의 조직을 SEM, XRD, EPMA를 이용하여 분석하였고 동전위 분극시험으로 부식 거동을 평가하였으며 micro-vickers 경도계를 이용하여 단면의 경도를 측정하였다.

• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.23-30
• /
• 1997

Semiconductive SrTiO3 ceramic bodies were prepared by conventional ceramic powder processes in-cluding sintering in a reducing atmosphere. Sodium or potassium ions were diffused from the surface of the sintered bodies into the inner region using thermal diffusion process at 800-120$0^{\circ}C$. The effects of such ther-mal treatments on the electrical and chemical characteristics of the grain boundaries were investigated. The presence of sodium or potassium ions at grain boundaries produces non-linear current-voltage behaviors, electrical boundary potential barriers of 0.1-0.2eV, and threshold voltages of 10-70V. The diffused ions form diffusion layers with thicknesses of 20-50nm near the grain boundaries, reducing the concentration of strontium and oxygen.

• The Journal of Engineering Geology
• /
• v.10 no.1
• /
• pp.51-62
• /
• 2000

The $CO_2$-richrich water pumps or springs out at two sites (Sinchon and Kohran) consisting of Cretaceous sedimentary rocks in Kyungpook area. The water has been long known as its soda pop-liketaste and therapeutic effect against calcium deficit, stomach and skin troubles, etc. The water arecharacterized by a high $CO_2$ concentration $(P_{CO2}=0.29~l.01 atm)$ and electrical conductance (1,093~2,810$\mu$S/cm). The $CO_2$-rich water belongs to Ca(Na)-$HCO_3$ type in chemical classification. The contents of Ca, Mg, Na, HCO$_3$ and Fe of $CO_2$-rich water show much higher values than those of general groundwater Environmental isotopic data $(^2H/^1H, ^{18}O/^{16}O and ^3H/^1H)$ indicate that the water is ofmeteoric origin recharged after 1950s. The $CO_2$ in the springs seems to be originated from deep-seatedsource related to acidic porphyry and granite nearby sedimentary rocks. Carbonate minerals and albiteare likely to be the major source minerals of the dissoved inorganic constituents in the $CO_2$-rich water.The equilibrium state between major minerals and $CO_2$-rich water was calculated by a thermodynamicprogram.

• Economic and Environmental Geology
• /
• v.46 no.1
• /
• pp.21-28
• /
• 2013

In order to optimize gold leaching from refractory sulfide concentrate, a HCl-NaClO-$FeCl_3$ solution with varying attributes was applied to the roasted concentrate from Uil mine. The gold from Uil mine occurs in the form of invisible gold that is difficult to leach. The results of the gold leaching experiments showed that the best gold leaching parameters were $550^{\circ}C$ of roasting temperature, 2.0 M of concentration, 1.0% of pulp density, and $70^{\circ}C$ of leaching temperature. It is confirmed that the HCl-NaClO-$FeCl_3$ solution was an environmentally friendly method to leach gold and silver from the refractory sulfide concentrate as an alternative lixiviant to cyanide.