• 제목/요약/키워드: $NaMnO_4$

검색결과 247건 처리시간 0.023초

기반암에 따른 청풍지역 하상퇴적물의 지구화학적 특성 (Geochemical Characteristics of Stream Sediments Based on Bed Rocks in the Cheongpung Area)

  • 박영석;박대우;김종균;송영상;이장존
    • 자원환경지질
    • /
    • 제39권6호
    • /
    • pp.675-687
    • /
    • 2006
  • 이 연구에서는 청풍지역 하상퇴적물에 대한 지구화학적 특성 규명을 통해, 주성분원소 및 미량원소에 대한 청풍지역의 자연배경치를 제시하고, 지구화학적 재해에 대해 예견하고자 한다. 이를 위해 물이 흐르고 있는 1차 수계를 대상으로 하상퇴적물시료를 채취하였고, 실험실에서 자연건조 시켰으며, 화학적 분석을 위해 알루미나 몰타르를 이용하여 200메쉬 이하로 분쇄하였다. 주성분원소 및 미량성분원소는 XRD, XRF, ICP-AES, NAA를 이용하여 분석하였다. 청풍지역 하상퇴적물의 기반암에 따른 지질집단별 지구화학적 특성 비교를 위해, 화강암질편마암지역, 메타텍틱편마암지역, 다도응회암지역, 유치역암 지역, 능주용암지역으로 분류하였다. 청풍지역 하상퇴적물 전체에 대한 주성분원소 함량은 $SiO_2\;47.31{\sim}72.81\;wt.%,\;Al_2O_3 \;11.26{\sim}21.88\;wt.%,\;Fe_2O_3\;2.83{\sim}8.39\;wt.%,\;CaO\;0.34{\sim}7.54\;wt.%,\;MgO\; 0.55{\sim}3.59\;wt.%,\;K_2O\;1.71{\sim}4.31\;wt.%,\;Na_2O\;0.56{\sim}2.28\;wt.%,\;TiO_2\;0.46{\sim}1.24\;wt.%,\;MnO\;0.04{\sim}0.27\;wt.%,\;P_2O_5\;0.02{\sim}0.45\;wt.%$이다. 청풍지역 하상퇴적물 전체에 대한 미량성분원소 및 희토류원소 함량은 $Ba\;700ppm{\sim}8990ppm,\;Be\;1.0{\sim}3.50ppm,\;Cu\;6.20{\sim}60ppm,\;Nb\;12{\sim}28ppm,\;Ni\;4.4{\sim}61ppm,\;Pb\;13{\sim}34ppm,\;Sr\;65{\sim}787ppm,\;V\;4{\sim}98ppm,\;Zr\;32{\sim}164ppm,\;Li\;21{\sim}827ppm,\;Co\;3.68{\sim}65ppm,\;Cr\;16.7{\sim}409ppm,\;Cs\;72{\sim}37.1ppm,\;Hf\;4.99{\sim}49.2ppm,\;Rb\;71.9{\sim}649ppm,\;Sb\;0.16{\sim}5.03ppm,\;Sc\;4.97{\sim}5ppm,\;Zn\;26.3{\sim}375ppm,\;Ce\;60.6{\sim}373ppm,\;Eu\;0.82{\sim}6ppm,\;Yb\;0.71{\sim}10ppm$의 범위를 보였다.

포항지역 제3기층내 지하수와 지표수의 산성화 및 해수혼합, 그리고 액상화 유출수 기원에 관한 연구 (Groundwater and Stream Water Acidification and Mixing with Seawater, and Origin of Liquefaction-Expelled Water in a Tertiary Formation in the Pohang Area)

  • 정찬호;오송민;이유진;이용천;김영석;강태섭
    • 지질공학
    • /
    • 제32권4호
    • /
    • pp.559-569
    • /
    • 2022
  • 이 연구는 포항시 흥해지역 지하수, 하천수, 저수지의 해수 혼합과 산성화, 그리고 포항지진(2017년 11월 15일)으로 인한 액상화 유출수의 기원에 대해서 알아보았다. 연구지역은 제3기 퇴적암층 지질로 구성된다. 지하수 6점, 저수지 5점, 하천수 4점, 액상화 유출수 2점, 해수 1점의 시료를 채취하여 화학성분과 산소 및 수소 동위원소를 분석하였다. 연구지역 중심을 동서로 관통하는 곡강천은 서쪽에서 동해쪽으로 흐른다. 하천 하부지역의 지하수와 저수지는 pH 4 이하의 산성수로 황산염이 부화된 Ca(Mg)-SO4의 수질화학적 유형을 보인다. 제 3기 지층에서 확인되는 황철석의 산화에 의해 기원한 것으로 보이는 Al, Mn, Fe 성분이 특징적으로 높은 농도를 보인다. 하천 상부지역은 하천을 따라서 유입된 염수가 혼합되어 지하수는 Ca(Na)-HCO3(Cl) 유형의 화학적 특성을 보인다. 𝛿D와 𝛿18O 동위원소 분석 결과 모든 물은 GMWL을 따라서 분포하며, 저수지는 증발작용으로 부화된 특성을 보인다. 화학성분과 동위원소 조성으로 볼 때 액상화 유출수 2점은 충적층으로 확산된 인접한 하천수, 그리고 염수화가 일부 진행된 심부와 천부 지하수가 용출된 것으로 보인다.

해수분리 Vibrio cholerae non-O1 FM-3의 Hemolysin (Characteristics of Hemolysin Produced by Vibrio cholerae non-O1 FM-3 Isolated from Sea Water)

  • 김신희;박미연;이용언;조묘헌;장동석
    • 한국수산과학회지
    • /
    • 제30권4호
    • /
    • pp.556-561
    • /
    • 1997
  • 해수로부터 분리한 V. cholerae non-O1 FM-3 이 생산하는 hemolysin의 특성에 관하여 연구한 결과를 요약하면 다음과 같다. 1. V. cholerae non-O1 FM-3이 생산하는 hemolysin은 대수증식기일 때 가장 높은 활성을 나타내었으며, Sephadex G-100 gel column chromatography로 부분정제한 후 hemolysin의 특성을 실험한 결과, pH 7.0, $4^{\circ}C$에서 가장 안정하였으며, $60^{\circ}C$, 30분 가열에 의해 완전히 실활되었다. 2. 적혈구와 hemolysin이 반응할 때, $Na^+,\;K^+$과 같은 1가 양이온을 첨가하면 약간의 활성증가를 보였으며, $Ca^{2+},\;Mg^{2+},\;Mn^{2+}$과 같은 2가 양이온을 첨가하였을 때 급격한 활성증가를 보였고, 반면 $Zn^{2+}$ 첨가시에는 급격히 활성이 저하되었다. 3. 적혈구 현탁액과 hemolysin을 각각 다른 온도대에서 반응시킨 결과, $4^{\circ}C$에서도 온도와 관계없이 적혈구막과 hemolysin의 결합이 가능한 온도 비의존적인 제1단계와, 용혈황성의 최적온도대인 $37^{\circ}C$에서만 용혈작용이 일어나는 온도 의존적인 제2단계로 나누어졌다.

  • PDF

Optimal Condition for the Production of Exopolysaccharide by Marine Microorganism 96CJ10356

  • 이현상;박신혜;고성환;이종호;이홍금
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2000년도 춘계학술발표대회
    • /
    • pp.137-140
    • /
    • 2000
  • Marine microorganism strain 96CJ10356 produced exopolysaccharides, designated as EPS-R. To optimize culture conditions for the production of EPS-R, carbon, nitrogen, mineral salt, temperature, and pH were examined. STN medium was suggested as follow; sucrose 20, tryptone 10, NaCl 10, $MgSO_4$ 5, $CaCl_2$ 1, $KH_2PO_4$ 0.0076, $K_2HPO_4$ 0.0083, $FeCl_2$ 0.005, $MnCl_2$ 0.001, $NaMoO_4$ 0.001, $ZnCl_2$ 0.001 (g/1) and pH 7.0 About 9.23 g/l of EPS-R was obtained from the STN medium after cultivation for 120 h at $25^{\circ}C$ in 5-liter jar fermentor with an aeration rate of 0.17 vvm. Apparent viscosity and flocculation activity of the culture broth were increased with the production of the EPS-R and the maximal values were reached to 415 cp and 1400 units/ml against 0.5 % activated carbon, respectively.

  • PDF

강변여과수 개발을 위한 낙동강 충적층 지하수의 지구화학적 특성연구 (Geochemical Study on the Alluvial Aquifer System of the Nakdong River for the Estimation of River Bank Filtration)

  • 김건영;고용권;김천수;김형수;김성이
    • 지질공학
    • /
    • 제13권1호
    • /
    • pp.83-105
    • /
    • 2003
  • 지하수의 인공함양특성을 해석하기 위한 기초조사로서 낙동강변의 충적층내에 부존하는 자연수의 지구화학적 특성을 연구하였다. 전체적으로 시추공 및 지표수에 대한 현장측정자료는 시기별로 큰 차이를 보이지 않는다. 연구지역의 자연수는 Ca-$HCO_3$형에서부터 $Ca-SO_4$형에 속하며 특히 미량원소로서 Mn의 함량이 매우 높게 나타나고 있다. 다중패커시스템 (Multi-packer system)에 의해 채취된 시료에 대해 심도에 따른 변화를 살펴보면 Na, Ca, Mg, $HCO_3$의 함량이 심도가 깊어질수록 증가하고 있고, Cl과 $SO_4$의 경우는 맨 하부구간인 18m에서 채취된 시료들이 시료채취시기와 관계없이 매우 낮은 값을 보인다. 미량원소의 경우 문제가 되는 Mn은 시료채취 시기와 관계없이 중간 구간인 13.5m 구간에서 특히 많은 함량을 보이고 있다. 연구지역내 물시료들에 대한 산소와 수소 동위원소 및 삼중수소 함량 분석결과는 다중패커설치공 및 일반 관측공과 지표수들간에 서로 중첩되어 구분이 어렵다. 황동위원소 분석결과는 지하수내 황의 기원이 퇴적암을 구성하는 황산염광물의 용해에 의한 것으로 판단된다. 스트론튬 동위원소비는 양수정 및 그 인접공의 시료들과 강변에서 인접한 공의 시료들간에 차이는 있으나 명확하지는 않다. 질소동위원소 분석결과를 살펴보면 전반적으로 화학비료로나 토양내의 유기물로부터 유래한 것으로 해석할 수 있다.

킬레이트제를 활용한 VRFB용 고순도 오산화바나듐 제조 연구 (Study on the Manufacture of High-purity Vanadium Pentoxide for VRFB Using Chelating Agents)

  • 김선경;권숙철;김희서;서용재;유정현;장한권;전호석;박인수
    • 자원리싸이클링
    • /
    • 제31권2호
    • /
    • pp.20-32
    • /
    • 2022
  • 본 연구에서는 VRFB용 고순도 오산화바나듐을 제조하기 위한 불순물 분리 정제 공정에서 킬레이트제(EDTA)의 영향을 조사하였다. 저순도 바나듐 원료를 이용하여 제조된 바나듐 용액으로부터 NH4VO3 을 침전 회수하여 제조된 최종 V2O5 분말의 순도는 99.7%로 분석되었지만 NH4VO3 침전 회수 공정에서 킬레이트제를 첨가한 경우 최종 V2O5 분말 순도가 99.9% 이상으로 향상되었다. 이러한 결과는 첨가된 킬레이트제가 불순물 이온과 반응하여 complex를 형성하고 불순물 이온이 안정화되기 때문에 침전 회수 공정에서 바나듐에 대한 선택성이 향상된 것으로 판단된다. 하지만 제조된 V2O5 분말내에는 불순물 규격 대비 K, Mn, Fe, Na 및 Al 함유량이 높아 추가적인 불순물 정제 연구가 필요하였다. 고순도 V2O5 분말을 새롭게 개발된 직접 전해공정에 적용하여 바나듐 전해액을 제조하였고 이의 특성을 상용 전해액과 비교 분석하였다. 제조된 바나듐 전해액의 순도는 불순물 K, Ca, Na, Al, Mg 및 Si 성분의 높은 함량으로 인하여 상용 전해액의 순도 99.98%보다 낮은 99.97%로 분석되었다. 따라서 고순도 V2O5 분말 및 전해액 제조 공정의 불순물 분리 정제에 대한 추가적인 최적화 연구가 수행된다면 상용화가 가능한 공정이 개발될 것으로 기대된다.

부산 해운대지역 지하수와 지열수의 수리화학적 특성 (Hydrochemical characteristics of ground and geothermal waters in the Haeundae hot-spring area, Pusan, Korea)

  • 심형수;함세영;성익환;이병대;조병욱;황진연
    • 한국환경과학회지
    • /
    • 제9권3호
    • /
    • pp.241-252
    • /
    • 2000
  • Twenty-two water samples(fifteen groundwater and seven geothermal water samples) were collected to elucidate chemical characteristics of the ground and geothermal waters in the Haeundae hot spring area and its vicinity. Major and honor elements were analyzed for ground and geothermal water samples. The concentrations of $K^+$, Na+$, $Ca^{2+}$, $SO_4^{2-}$, $Cl^-$, ^F^-$ and $SiO_2$ were higher in the geothermal water samples than the groundwater samples except $HCO_3^- and Mg^{2+}$ ions. Based on the contents of Fe, Zn, Cu, Al, Mn and Pb, some of the ground and geothermal water samples are contaminated by anthropogenic sources. The ground waters shown on the Piper diagram belong to $Ca-HCO_3$ type, while the geothermal waters Na-Cl type. The graphs of $Cl^-$ versus $Na^+$, $Ca^{2+}, Mg^{2+}, K^+, SO_4^{2-} and HCO_3^-$ indicate that the groundwater is related partly with mineral-water reaction and partly with anthropogenic contamination, while the geothermal water is related with saline water. On the phase stability diagram, groundwater and thermal water mostly fall in the field of stability of kaolinite. This indicates that the ground and geothermal waters proceed with forming kaolinite. Factor and correlation analyses were carried out to simplify the physicochemical data into grouping some factors and to find interaction between them. Based on the Na-K, Na-K-Ca and Na-K-Ca-Mg geothermometers and silica geothermometers, the geothermal reservoir is estimated to have equilibrium temperature between 125${$\mid$circ}C$ and 160${$\mid$circ}C$.

  • PDF

Lactobacillus jensenii YW-33이 생산하는 다당류성 생물응집제 및 생산조건

  • 서호찬;최양문;조홍연;양한철
    • 한국미생물·생명공학회지
    • /
    • 제25권3호
    • /
    • pp.328-334
    • /
    • 1997
  • A bioflocculant producing bacterium for wastewater treatment was isolated and identified as Lactobacillus jensenii. The bioflocculant was supposed as a polysaccharide. Lactobacillus jensenii YW-33 produced the flocculant with highest activity in the medium composed of 2% sucrose, 0.05% tryptone, 0.5% yeast extract, 0.01% K$_{2}$HPO$_{4}$, 0.01% KH$_{2}$PO$_{4}$, 0.01% NaCl, 0.005% MnSO$_{4}$, 5H$_{2}$O and 0.2% Tween 80. The optimal culture pH and temperature were 7.0 and 25$\circ$C, respectively. In the time course of production with jar fermentor, the productivity of the flocculant was increased in proportion to the cell growth and the cultivation time for maximum production was 24 hrs, showing flocculating activity of 1,130 units per ml.

  • PDF

방사성 폐기물 내 $^{59/63}Ni$ 정량을 위한 분리 (Separation for the Determination of $^{59/63}Ni$ in Radioactive Wastes)

  • 이창헌;정기철;최광순;지광용;김원호
    • 방사성폐기물학회지
    • /
    • 제3권4호
    • /
    • pp.309-317
    • /
    • 2005
  • 방사성 폐기물 핵종 재고량 평가에 필요한 핵종분석을 위하여 다양한 매질의 방사성 폐기물 시료로부터 $^{99}Tc,\;^{94}Ng,\;^{55}Fe,\;^{90}Sr$$^{59/63}Ni$의 분리에 관한 연구가 수행되고 있다. Ni은 음이온교환 수지와 Sr-Spec 추출 크로마토그래피 수지로 Re($^{99}Tc$의 대용물), Nb, Fe 및 Sr을 차례로 분리하는 과정에서 Ca, Mg, Al, Cr, Ti, Mn, Ce, Na, K 및 Cu와 함께 회수되었다. 본 연구에서는 Ni의 선택적 분리기술을 확립하기 위하여 Ni-Spec 추출 크로마토그래피 및 양이온교환수지법으로 이들의 분리거동을 비교하였다. 또한 Ni의 정제와 기체비례계수법으로 방사능을 측정하기에 적합한 계측시료 준비를 위하여 ammonium $citrate/ethanol-H_2O$ 및 tartaric $acid/acetone-H_2O$에서 dimethylglyoxime(DMG)에 의한 Ni의 침전거동을 조사하였다 원자력발전소로부터 채취한 폐이온교환수지 시료 용해용액의 화학조성을 모사하여 만든 모의 폐이온교환수지 용액을 사용하여 Re, Nb, Fe 및 Sr 분리과정을 거쳐 최종적으로 분리한 Ni의 회수율은 $92.1\%\;(RSD:\;0.9\%)$이었다. 또한 tartaric $acid/acetone-H_2O$에서 DMG에 의한 Ni의 회수율은 $85.6\%\;(RSD:\;1.9\%)$이었다.

  • PDF

ATO 처리후, 플라즈마 전해 산화 처리된 Ti-6Al-4V 합금의 표면 형태 (Surface Morphology of PEO-treated Ti-6Al-4V Alloy after Anodic Titanium Oxide Treatment)

  • Kim, Seung-Pyo;Choe, Han-Cheol
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2018년도 춘계학술대회 논문집
    • /
    • pp.75-75
    • /
    • 2018
  • Commercially pure titanium (CP-Ti) and Ti-6Al-4V alloys have been widely used in implant materials such as dental and orthopedic implants due to their corrosion resistance, biocompatibility, and good mechanical properties. However, surface modification of titanium and titanium alloys is necessary to improve osseointegration between implant surface and bone. Especially, when titanium oxide nanotubes are formed on the surface of titanium alloy, cell adhesion is greatly improved. In addition, plasma electrolytic oxide (PEO) coatings have a good safety for osseointegration and can easily and quickly form coatings of uniform thickness with various pore sizes. Recently, the effects of bone element such as magnesium, zinc, strontium, silicon, and manganese for bone regeneration are researching in dental implant field. The purpose of this study was researched on the surface morphology of PEO-treated Ti-6Al-4V alloy after anodic titanium oxide treatmentusing various instruments. Ti-6Al-4V ELI disks were used as specimens for nanotube formation and PEO-treatment. The solution for the nanotube formation experiment was 1 M $H_3PO_4$ + 0.8 wt. % NaF electrolyte was used. The applied potential was 30V for 1 hours. The PEO treatment was performed after removing the nanotubes by ultrasonics for 10 minutes. The PEO treatment after removal of the nanotubes was carried out in the $Ca(CH_3)_2{\cdot}H_2O+(CH_3COO)_2Mg{\cdot}4H_2O+Mn(CH_3COO)_2{\cdot}4H_2O+Zn(CH_3CO_2)_2Zn{\cdot}2H_2O+Sr(CH_2COO)_2{\cdot}0.5H_2O+C_3H_7CaO_6P$ and $Na_2SiO_3{\cdot}9H_2O$ electrolytes. And the PEO-treatment time and potential were 3 minutes at 280V. The morphology changes of the coatings on Ti-6Al-4V alloy surface were observed using FE-SEM, EDS, XRD, AFM, and scratch tester. The morphology of PEO-treated surface in 5 ion coating solution after nanotube removal showed formation or nano-sized mesh and micro-sized pores.

  • PDF