• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.498-504
• /
• 2014

Particulate nitride composites have been fabricated by sintering the compacted powder of AlN and 5 - 64.3 mol% $Al_2O_3$, with a small addition of $Y_2O_3$ ($Y_2O_3$/AlN, 1 wt%), in 1-atm nitrogen gas at $1650-1900^{\circ}C$. The composites were characterized in terms of sintering behavior, phase relations, microstructure and thermal shock resistance. AlN, 27R AlN pseudopolytype, and alminium oxynitride (AlON, $5AlN{\cdot}9Al_2O_3$) were found to existin the sintered material. Regardless of batch composition, the AlN-$Al_2O_3$ powder compacts exhibited similar sintering behavior; however, the degree of shrinkage commonly increased with increasing $Al_2O_3$ content, consequently giving high sintered bulk density. By increasing the $Al_2O_3$ addition up to ${\geq}50 mol%$, the matrix phase in the sintered material was converted from AlN or 27R to AlON. Above $1850^{\circ}C$, a liquid phase was formed by the reaction of $Al_2O_3$ with AlN, aided by $Y_2O_3$ and mainly existed at the grain boundaries of AlON. Thermal shock resistance was superior in the sintered composite consisting of AlON with dispersed AlN or AlN matrix phase.

• Plant Resources
• /
• 제8권1호
• /
• pp.32-35
• /
• 2005

This study was conducted to investigate the influence of $K_{2}O$ fertilizer application on growth, yield and lodging resistance of rice. Culm length and panicle length were lowest at the treatment of fertilizer level, $N-P_{2}O_{5}-K_{2}O=16-8-8$ plot but number of panicle, percentage of fruitful culm, $1{\ell}$ grain weights of paddy rice and brown rice, 1,000 grains weight of brown rice, brown rice ratio, yields of paddy rice and brown rice were highest at the treatment of fertilizer level, $N-P_{2}O_{5}-K_{2}O=16-8-8$ kg/10a plot. Bending moment, breaking strength and lodging index were lowest at the treatment of fertilizer level, $N-P_{2}O_{5}-K_{2}O=16-8-8$ kg/10a plot. Judging from the results reported above, an optimum fertilizer level of rice for lodging resistance is most likely be $N-P_{2}O_{5}-K_{2}O=16-8-8$ kg/10a treatment.

• 한국세라믹학회지
• /
• 제24권1호
• /
• pp.23-32
• /
• 1987

Synthesis of high purity ultrafine Si3N4 and ${\beta}$-Sialon powders was investigated via the simultaneous reduction and nitriding of amorphous SiO2, SiO2-Al2O3 system prepaerd by hydrolysis of alkoxides, using carbonablack as a reducing agent. In Si(OC2H5)4-C2H5 OH-H2 O-NH4OH system, hydrolysis rate increased with increasing reaction temperature and pH. Pure ${\alpha}$-Si3N4 was formed at 1350$^{\circ}C$ for 5 hrs in N2 atmosphere. In Si(OC2H5)4-Al(OC3H7)3-C6H6-H2 O-NH4OH system, weight loss increased as Si/Al ratio decreased. Single phase ${\beta}$-Sialon consisted of Si/Al=2 was formed at 1350$^{\circ}C$ in N2 and minor phases of ${\alpha}$-Si3N4, AIN, and X-phase were existed besides theSialon phase at other Si/Al ratios. The Si3N4 and Sialon powders synthesized from alkoxides consisted of uniform find particles of 0.05-0.2$\mu\textrm{m}$ in diameter, respectively.

• 한국세라믹학회지
• /
• 제29권5호
• /
• pp.410-418
• /
• 1992

Si3N4, AlN and Y2O3 powder mixtures of the Y0.1(Si, Al)12(N, O)16 composition were hot-pressed at 1900℃ for 0 to 60 min under 30 MPa in order to fabricate the partially-stabilized α-Sialon ceramics (X=0.1). Room and high temperature flexural strengths of the specimens were compared with those of Si3N4-5 wt%Y2O3, Si3N4-5 wt%Y2O3-2 wt%Al2O3, and β-Sialon (Z=0.5) ceramics. The flexural strength of the α-Sialon ceramics which was hot-pressed for 15 min showed the highest value of 820 MPa at 1400℃ that is relatively higher temperature. It is guessed that a little amount of glassy phase existed in grain boundary because Y2O3 and AlN components were incoperated in Si3N4 grains, or transient liquid phase sintering, and microstructure with the smaller grain size and the interlocked grains of α'-and β-Si3N4 was obtained by the hot-pressing at high temperature of 1900℃ for the short time (15 min).

• 한국환경과학회지
• /
• 제12권9호
• /
• pp.997-1004
• /
• 2003

The objective of this research was to test whether, under controlled laboratory conditions, hybrid SNCR/SCR process improves N $O_{x}$ removal efficiency in comparison with the SNCR only. The hybrid process is a combination of a redesigned existing SNCR with a new downstream SCR. N $O_{x}$ reduction experiments using a hybrid SNCR/SCR process have been conducted in simple NO/N $H_3$/ $O_2$ gas mixtures. Total gas flow rate was kept constant 4 liter/min throughout the SNCR and SCR reactors, where initial N $O_{x}$ concentration was 500 ppm in the presence of 5% or 15% $O_2$. Commercial catalysts, $V_2$ $O_{5}$ -W $O_3$-S $O_4$/Ti $O_2$, were used for SCR N $O_{x}$ reduction. The residence time and space velocity were around 1.67 seconds and 2,400 $h^{-1}$ or 6000 $h^{-1}$ in SNCR and SCR reactors, respectively. N $O_{x}$ reduction of the hybrid system was always higher than could be achieved by SNCR alone at a given value of N $H_{3SLIP}$. Optimization of the hybrid system performance requires maximizing N $O_{x}$ removal in the SNCR process. An analysis based on the hybrid system performance in this lab-scale work indicates that a equipment with N $O_{xi}$ =500 ppm will achieve a total N $O_{x}$ removal of about 90 percent with N $H_{3SLIP}$ $\leq$ 5 ppm only if the SNCR N $O_{x}$ reduction is at least 60 percent. A hybrid SNCR/SCR process has shown about 26∼37% more N $O_{x}$ reduction than a SNCR unit process in which a lower temperature of 85$0^{\circ}C$ turned out to be more effective.be more effective.

• Journal of Microbiology and Biotechnology
• /
• 제21권9호
• /
• pp.988-994
• /
• 2011

A significant amount of nitrous oxide ($N_2O$), which is one of the serious greenhouse gases, is emitted from nitrification and denitrification of wastewater. Batch wastewater nitrifications with enriched nitrifiers were carried out under oxygen-limited condition with synthetic (without organic carbon) and real wastewater (with organic carbon) in order to find out the effect of ammonium concentration on $N_2O$ emission. Cumulated $N_2O$-N emission reached 3.0, 5.7, 6.2, and 13.5 mg from 0.4 l of the synthetic wastewater with 50, 100, 200, and 500 mg/l ${NH_4}^+$-N, respectively, and 1.0 mg from the real wastewater with 125 mg/l ${NH_4}^+$-N. The results indicate that $N_2O$ emission increased with ammonium concentration and the load. The ammonium removal rate and nitrite concentration also increased $N_2O$ emission. Comparative analysis of $N_2O$ emission from synthetic and real wastewaters revealed that wastewater nitrification under oxygen-limited condition emitted more $N_2O$ than that of heterotrophic denitrification. Summarizing the results, it can be concluded that denitrification by autotrophic nitrifiers contributes significantly to the $N_2O$ emission from wastewater nitrification.

• 한국응용과학기술학회지
• /
• 제29권3호
• /
• pp.466-472
• /
• 2012

가시광선에 감응하는 광촉매를 제조하기 위하여 $TiO_2$에 질소(N)를 도핑하여 $N-TiO_2$를 제조하였다. 제조한 광촉매의 결정성, 입자 형상 및 도핑 상태는 XRD, FE-SEM 및 XPS를 이용하여 조사하였다. 제조한 광촉매의 활성 평가는 메틸렌블루의 광분해로 조사하였다. 제조한 광촉매는 anatase type이었으며, pH가 높을수록 결정화도가 향상되었다. 제조한 광촉매의 입자 크기는 pH 2.0에서 5.42 nm, pH 4.7에서 5.99 nm, pH 9.0에서 7.58 nm로, 입자 크기는 pH가 증가 할수록 약간씩 증가하였다. 광촉매의 활성은 결정화도에 비례하였다. $TiO_2$에 N를 도핑하여 제조한 $N-TiO_2$가 가시광선 하에서도 활성을 나타냈다. $TiO_2$에 도핑한 N는 격자 속에 존재하는 것이 아니라 표면에 존재하였다.

• 한국환경과학회지
• /
• 제23권5호
• /
• pp.903-910
• /
• 2014

This study examined the treatment characteristics of hard-to-degrade pollutants such as TCE which are found in organic solvent and cleaning wastewater by nZVI that have excellent oxidation and reduction characteristics. In addition, this study tried to find out the degradation characteristics of TCE by Fenton-like process, in which $H_2O_2$ is dosed additionally. In this study, different ratios of nZVI and $H_2O_2$, such as 1.0 mM : 0.5 mM, 1.0 mM : 1.0 mM, and 1.0 mM : 2.0 mM were used. When 1.0 mM of nZVI was dosed with 1.0 mM of $H_2O_2$, the removal efficiency of TOC was the highest and the first order rate constant was also the highest. When 1mM of nZVI was dosed with 0.5 mM of $H_2O_2$, the first order rate constant and removal efficiency were the lowest. The size of first order rate constant and removal efficiency was in the order of nZVI 1.0 mM : $H_2O_2$ 1.0 mM > nZVI 1.0 mM : $H_2O_2$ 2.0 mM > nZVI 1.0 mM : $H_2O_2$ 0.5 mM > $H_2O_2$ 1.0 mM > nZVI 1.0 mM. It is estimated that when 1.0 mM of nZVI is dosed with 1.0 mM of $H_2O_2$, $Fe^{2+}$ ion generated by nZVI and $H_2O_2$ react in the stoichiometric molar ratio of 1:1, thus the first order rate constant and removal efficiency are the highest. And when 1.0 mM of nZVI is dosed with 2.0 mM of $H_2O_2$, excessive $H_2O_2$ work as a scavenger of OH radicals and excessive $H_2O_2$ reduce $Fe^{3+}$ into $Fe^{2+}$. As for the removal efficiency of TOC in TCE by simultaneous dose and sequential dose of nZVI and $H_2O_2$, sequential dose showed higher first order reaction rate and removal efficiency than simultaneous dose. It is estimated that when nZVI is dosed 30 minutes in advance, pre-treatment occurs and nanoscale $Fe^0$ is oxidized to $Fe^{2+}$ and TCE is pre-reduced and becomes easier to degrade. When $H_2O_2$ is dosed at this time, OH radicals are generated and degrade TCE actively.

• 대한화학회지
• /
• 제30권3호
• /
• pp.320-326
• /
• 1986

몇몇 백금(II) 착물과 팔라듐(II) 착물에 잠재적인 항종양 활성이 있다고 보고 되었다. 그러나 백금(II) 착물들은 항종양제로서 독성이 있으므로 본 연구에서는 아데닌, 우라실, 시토신 및 말로네이트 배위자를 포함한 팔라듐(II) 착물에 관심을 가지고 합성하였다. 팔라듐(II)와 배위자와의 반응은 수용액 상태에서 연구하였으며, $[Pd(en)(C_5H_5N_5)_2](NO_3)_2,\;[Pd(en)(C_4H_3N_2O_2)Cl],\;[Pd(en)(C_4H_5N_3O)_2](NO_3)_2{\cdot}(C_4H_5N_3O)$ 및 $[Pd(en)(C_3H_2O_4)]$ 분자식의 형태로 분리하였다. 이들 화합물들은 원소분석 및 질량분석 및 질량분석으로부터 존재 원소의 함량과 분자식을 추정하였으며, 적외선 스펙트럼과 전자 스펙트럼으로부터 금속과 배위자의 결합 및 전자이동에 대해서 조사하였다.

• 대한화학회지
• /
• 제53권5호
• /
• pp.512-520
• /
• 2009

본 연구에서는 반응성이 큰 황이 산소와 결합하여 산화황이 되고 이것들이 클러스터를 이루었 을 때의 구조와 결합에너지에 대하여 조사하였다. $S_{n}O_{n},\;S_{n}O_{2n},\;S_{n}O_{3n}\;(n\;=\;1{\sim}4)$까지의 여러 가능한 분자 구조를 B3LYP/6-311G** 이론수준까지 최적화 하였으며, 단량체($SO,\;SO_2,\;SO_3$)가 증가할 때의 결합에너지를 MP2/6-311G** 수준까지 계산하였다. $SnOn\;(n\;=\;1{\sim}4)$의 경우 S-O 단량체 증가에 따라 상대적으로 안정화되는 경향이 강하게 나타났으며, 약 20-25 kcal/mol 정도 증가하는 것으로 예측 되었다. 반면 $S_nO_{2n},\;S_nO_{3n} \;(n\;=\;1{\sim}4)$의 경우에는 $SO_2$ 나 $SO_3$ 의 증가에 따른 열역학적 안정성이 상대적으로 덜 안정화 되는 것으로 나타났으며, SO2 단량체가 증가함에 따른 결합에너지 변화는 2.2 kcal/mol, 그리고 $SO_3$ 단량체가 증가함에 따라 흡열반응으로 나타나 열역학적으로 더욱 불안정해질 것으로 예상된다.