• Title/Summary/Keyword: $N_2$ treatment

Search Result 7,560, Processing Time 0.042 seconds

Grain Boundary Behavior and Heat Treatment Effect of AlN Ceramics Prepared from Al-isopropoxide (Al-isopropoxide로부터 AlN 소결체의 입계상 거동 및 열처리 효과)

  • 황해진;이홍림
    • Journal of the Korean Ceramic Society
    • /
    • v.28 no.4
    • /
    • pp.269-278
    • /
    • 1991
  • Fine AlN powder was synthesized by carbothermal reduction and nitridation of alumimun hydroxide prepared from Al-isopropoxide. AlN ceramics with Y2O3 and CaO were prepared by hot-pressing under the pressure of 30 MPa at 180$0^{\circ}C$ for 1 h in N2 atmosphere. Grain boundary behavior and purification mechanism of AlN lattice were examined by heat treatment of AlN ceramics at 185$0^{\circ}C$ for 1-6 h in N2 atmosphere. AlN ceramics without sintering additives showed poor sinterability. However, Y2O3-doped and CaO-doped AlN ceramics were fully densified nearly to theoretical density. As the heat treatment time increased, c-axis lattice parameter increased. This is attributed to the removal of Al2O3 in AlN lattice. This purification effect of AlN attice depended upon the quantity of secondary oxide phase in the inintial stage of heat treatment and the heat treatment time.

  • PDF

Phase Analysis and Fracture Toughness of $Si_3N_4$-Zr(Y)$O_2$ Composites after Heat Treatment ($Si_3N_4$-Zr(Y)$O_2$ 복합체의 열처리에 따른 상분석 및 파괴인성)

  • 김재룡;김종희
    • Journal of the Korean Ceramic Society
    • /
    • v.28 no.1
    • /
    • pp.53-59
    • /
    • 1991
  • The reaction product between Si3N4 and ZrO2 has been studied by heat treatment of Si3N4-Zr(Y)O2 composite in high vacuum(<10-5 torr) and in air at $700^{\circ}C$. ZrN was formed after heat treatment in vacuum and easily oxidized after heat treatment in air. The amount of ZrN is related to the Y2O3 content dissolved in ZrO2. After the heat treatment in air the toughness increased and the spalling due to the oxidation of ZrN in specimen surface was observed. As a result, it is suggested that the formation of ZrN phase in Si3N4-ZrO2 composite enhance the toughness of the composite in an oxidation conditon.

  • PDF

Effect of Nitrous Oxide (N2O) Treatment on Quality of Peach (Prunus persica) Postharvest (복숭아(Prunus persica) 수확 후 아산화질소(N2O) 처리가 품질에 미치는 영향)

  • Nah, Hyun-Seok;Bae, Ro-Na;Lee, Seung-Koo
    • Horticultural Science & Technology
    • /
    • v.30 no.1
    • /
    • pp.42-49
    • /
    • 2012
  • This experiment was conducted to find out the effects of nitrous oxide ($N_2O$) on the postharvest quality of 'Janghowon hwangdo' peach fruits. Fruits were harvested at commercial maturity for marketing in late September, and treated with 70% $N_2O$ + 20% $O_2$ + 10% air, 80% $N_2O$ + 20% $O_2$, and 90% $N_2O$ + 10% $O_2$ for 48 h, and then stored at $15^{\circ}C$. No significant treatments for soluble sugar and titratable acidity contents were detected. However, good appearance and taste in peach fruit were maintained better in 80% $N_2O$ treatment than in air treatment. The treatment with 90% $N_2O$ had negative effects on weight loss and taste because of rotting by anaerobic fermentation. 80% $N_2O$ treated fruit had significantly higher fungus (Botrytis cinerea) growth inhibition of saprogenic approximately than air treatment until 12 days of storage. The browning and rotting at surface of peach were also retarded when peaches were treated with 80% $N_2O$ before they were artificially wounded. The activity of polyphenol oxidase (PPO) was inhibited about 80% in peach of 80% $N_2O$ treatment compared with in air treatment. The result showed that 80% $N_2O$ treatment was able to extend the shelf life of peach fruits through maintaining taste and inhibition of softening and browning by rotting and wounding during storage.

N$_2$ Plasma Treatment Effects of Silicon Nitride Insulator Layer for Thin Film Transistor Applications

  • Ko, Jae-Kyung;Park, Yong-Seob;Park, Joong-Hyun;Kim, Do-Young;Yi, Jun-Sin;Chakrabarty, K.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2002.08a
    • /
    • pp.563-566
    • /
    • 2002
  • We investigated to decrease the leakage current of SiNx film by employing $N_2$ plasma treatment. The insulator layers were prepared by two step process; the $N_2$ plasma treatment and then PECVD SiNx deposition with $SiH_4$, $N_2$ gases. To prove the influence of the $N_2$ plasma treatment, the Si substrate was exposed to the plasma, which was generated in Ne gas ambient. Without plasma treatment SiNx film grow at the rate of 7. 03 nm/min, has a refractive index n = 1.77 and hydrogen content of $2.16{\times}10^{22}cm^{-3}$ for $N_2/SiH_4$ gas flow ratio of 20. The obtained films were analyzed in terms of deposition rates, refractive index, hydrogen concentration, and electrical properties. By employing $N_2$ plasma treatment, interface traps such as mobile charges and injected charges were removed, hysteresis of capacitance-voltage (C-V) disappeared. We observed plasma treated sample were decreased the leakage current density reduces by 2 orders with respect to the sample having no plasma treatment.

  • PDF

Improved SiNx buffer layer by Using the $N_2$ Plasma Treatment for TFT-FRAM applications ($N_2$ 플라즈마를 이용한 TFT-FRAM용 $SiN_x$ 버퍼층의 특성 개선)

  • Lim, Dong-Gun;Yang, Kea-Joon;Yi, Jun-Sin
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2003.11a
    • /
    • pp.360-363
    • /
    • 2003
  • In this paper, we investigated SiNx film as a buffer layer of TFT-FRAM. Buffer layers were prepared by two step process of a $N_2$ plasma treatment and subsequent $SiN_x$ deposition. By employing $N_2$ plasma treatment, interface traps such as mobile charges and injected charges were removed, hysteresis of current-voltage curve disappeared. After $N_2$ plasma treatment, a leakage current was decreased about 2 orders. From these results, it is possible to perform the plasma treating process to make a good quality buffer layer of MFIS-FET or capacitor as an application of non-volatile memory.

  • PDF

Analysis of sewage treatment process for the improvement of T-N removal process (T-N 제거공정 개선을 위한 하수처리장 공정 분석)

  • Shin, Choon Hwan
    • Journal of Environmental Science International
    • /
    • v.27 no.2
    • /
    • pp.99-107
    • /
    • 2018
  • In order to design the improvement process for T-N removal, the treatment process of Suyoung, Gangbyeon, and Noxan sewage treatment plants (STP) in Busan was anlayzed. Suyoung STP shows a T-N removal efficiency of about 69.8% with MLE(Modified Ludzack ettinger) and A2O+MBR. However, it is necessary to improve the process to maintain over DO of 1 mg/L and is required to install a flow control tank to minimize the rainfall effect. Gangbyun STP shows a about 70.2% T-N removal efficiency with A2O+GFF(gravity fiber filtration). However, in order to improve T-N removal efficiency, it is needed to install MLE process to treat recycle water. Noksan STP shows a T-N removal efficiency of about 71.0% with MLE+Chemical treatment and shows stable T-N concentration in effluent. However, it is required a toxic chemical management process because bad wastewater flows into the STP, also is necessary a process improvement in order to increase internal recycling ratio. Especially, it is required a process improvement to increase HRT of nitrification tank because Suyoung and Gangbyeon STPs shows low nitrification efficiency during winter season.

Effect of Surface Treatment Condition of Aminosilane on Ethylene Polymerization of Supported Metallocene (아미노실란 표면 처리 조건이 담지메탈로센 촉매의 에틸렌 중합에 미치는 영향)

  • Lee, Sang Yun;Lee, Jeong Suk;Ko, Young Soo
    • Korean Chemical Engineering Research
    • /
    • v.53 no.3
    • /
    • pp.397-400
    • /
    • 2015
  • The effects of surface treatment method of unreacted N-[3-(trimethoxysilyl)propyl]ethylenediamine (2NS), $N^1$-(3-trimethoxysilylpropyl)diethylenetriamine (3NS), and 3-cyanopropyltriethoxysilane (1NCy) after grafting on the surface of silica and of the surface treatment temperature on ethylene polymerization were investigated. The Zr content of supported catalyst employing filtering method was higher than that of washing method, and the activities of supported catalysts prepared by washing method were higher than those of filtering methods significantly. Regardless of surface treatment methods the activities were in order by $SiO_2/2NS/(n-BuCp)_2ZrCl_2>SiO_2/1NCy/(n-BuCp)_2ZrCl_2>SiO_2/3NS/(n-BuCp)_2ZrCl_2$. The ethylene polymerization activity was increased as the surface treatment temperature of aminosilane on silica increased.

Effects of $\textrm{NO}_3$-N:$\textrm{NH}_4$-N Ratio and Elevated $\textrm{CO}_2$ on Growth and Quality of Lactuca sativa L. in Nutrient Film Technique (NFT재배에서 $\textrm{CO}_2$ 시용과 배양액의 $\textrm{NO}_3$:$\textrm{NH}_4$비율이 결구상추의 생육 및 품질에 미치는 영향)

  • 원선이;조영렬;이용범
    • Journal of Bio-Environment Control
    • /
    • v.5 no.2
    • /
    • pp.120-130
    • /
    • 1996
  • Crisphead lettuce(Lactuca sativa L.) was grown in NFT to investigate the effects of NO$_3$-N and NH$_4$-N ratio in nutrient solution and elevated $CO_2$ treatment in the crisphead lettuce growth. This experiment has been conducted under three different ratios of NO$_3$-N:NH$_4$-N(100:0, 75:25, 50:50) with two $CO_2$ concentration (control, 1500ppm ). The results are as follows; 1. In the case of not controlling pH and EC in nutrient solution, pH was gradually increased in NO$_3$-N:NH$_4$-N=100:0 treatment but rapidly decreased in the nutrient solution 2. Daily changes of NO$_3$-N and NH$_4$-N were observed without controlling the nutrient solution. In the treatments of NO$_3$-N:NH$_4$-N ratios were 75:25 and 50:50, NO$_3$-N absorption rates were 27.7% and 26.1%, while NH$_4$-N absorption rates were 87.9% and 71.2%, respectively. 3. There was little differences in total nitrogen of leaves. However phosphorus, potassium, calcium and magnesium contents were highly shown in the treatment of $CO_2$ 1500ppm and 100:0 ratio of NO$_3$-N:NH$_4$-N. 4. Higher $CO_2$ assimilation rate was shown in plants grown under $CO_2$ 1500ppm and 100:0 ratio of NO$_3$-N:NH$_4$-N. It dropped significantly with the increase of NH$_4$- N rates in nutrient solution. 5. Fresh weight, leaf number, root length and root weight of crisphead lettuce were far better in the treatment of $CO_2$ 1500ppm and 100:0 ratio of NO$_3$-N:NH$_4$-N. Growth differences by $CO_2$ elevation were not shown in other NO$_3$-N:NH$_4$-N treatments. 6. The highest nitrate contents of leaves were shown in NO$_3$-N single treatment but shown the lowest vitamin C contents. Nitrate contents of leaves were decreased by $CO_2$ but the effect was slight treatment.

  • PDF

Measurement of Nitrous Oxide Emissions on the Cultivation of Soybean by No-Tillage and Conventional-Tillage in Upland Soil

  • Yoo, Gil-Ho;Kim, Deok-Hyun;Yoo, Jin;Yang, Jong-Ho;Kim, Sang-Woo;Park, Ki-Do;Kim, Min-Tae;Woo, Sun-Hee;Chung, Keun-Yook
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.48 no.6
    • /
    • pp.610-617
    • /
    • 2015
  • The impact of 1 pound of nitrous oxide ($N_2O$) on warming the atmosphere is almost 310 times that of 1 pound of carbon dioxide. Agricultural soil management is the largest source of $N_2O$ emissions, accounting for about 73% of total $N_2O$ emissions. This study was conducted to evaluate the nitrous oxide emission in the cultivation of soybean during the first year of No-tillage (NT) and Conventional-tillage (CT) practices, under the various conditions such as different kinds of fertilizers, soil temperature, and moisture level. In the experiment, we set CT and NT treatments into 4 different groups - control treatments (no fertilization), green manure treatments, chemical fertilizer treatments and organic manure treatments. In the case of chemical fertilizer treatments, $N_2O$ emission of NT treatment was 7.78 to 22.59% lower than CT treatment. In organic manure treatment, $N_2O$ emission of NT treatment was 6.62% higher than CT treatment in August. But In July and September, $N_2O$ emission of NT treatment was 9.50% 28.38% lower than CT treatment, respectively. Soil temperature was correlated with $N_2O$ emission positively. In the future, continued long-term research on influence of various environmental factors on the generation of $N_2O$ and the economic value of no-till farming is required.

Influence of Gas Composition and Treatment Time on the Surface Properties of AISI 316L Austenitic Stainless Steels During Low-Temperature Plasma Nitrocarburizing Treatment (AISI 316L강의 저온 플라즈마침질탄화처리 시 가스조성과 처리시간이 표면특성에 미치는 영향)

  • Lee, In-Sup
    • Korean Journal of Metals and Materials
    • /
    • v.47 no.11
    • /
    • pp.716-721
    • /
    • 2009
  • The major drive for the application of low-temperature plasma treatment in nitrocarburizing of austenitic stainless steels lies in improved surface hardness without degraded corrosion resistance. The low-temperature plasma nitrocarburizing was performed in a gas mixture of $N_{2}$, $H_{2}$, and carbon-containing gas such as $CH_{4}$ at $450^{\circ}C$. The influence of the processing time (5~30 h) and $N_{2}$ gas composition (15~35%) on the surface properties of the nitrocarburized layer was investigated. The resultant nitrocarburized layer was a dual-layer structure, which was comprised of a N-enriched layer (${\gamma}_N$) with a high nitrogen content on top of a C-enriched layer (${\gamma}_C$) with a high carbon content, leading to a significant increase in surface hardness. The surface hardness reached up to about $1050HV_{0.01}$, which is about 4 times higher than that of the untreated sample ($250HV_{0.01}$). The thickness of the hardened layer increased with increasing treatment time and $N_{2}$ gas level in the atmosphere and reached up to about $25{\mu}m$. In addition, the corrosion resistance of the treated samples without containing $Cr_{2}N$ precipitates was enhanced than that of the untreated samples due to a high concentration of N on the surface. However, longer treatment time (25% $N_{2}$, 30 h) and higher $N_{2}$ gas composition (35% $N_{2}$, 20 h) resulted in the formation of $Cr_{2}N$ precipitates in the N-enriched layer, which caused the degradation of corrosion resistance.