• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.92-95
• /
• 2002

A study on the system automation for the nitrogen splash slag coating in Basic Oxygen Blowing Furnace (BOF) is described. The engineers are trying to do their best efforts to increase the life of converter lining by developing improved refractory material and optimal operation techniques in the steel plants, A new slag coating method is needed to reduce the erosion rates of the refractory. In the current slag costing method, the BOF was swung back and forth. The new method uses the oxygen lance to blow the residual slag to the walls and cone of the converter. The nitrogen gas is used for blowing. This method is developed based on the automation process at factory in POSCO dated on the May 1998. The test results of nitrogen splash slag coating system for the BOF at POSCO are show to show the effectiveness of the system.

• 한국축산시설환경학회지
• /
• 제5권3호
• /
• pp.181-188
• /
• 1999

This study was carried out to investigate the effect of blowing fan for reducing heat stress in lactating dairy cows in summer. Treatment conditions were divided into 3 types ; No blow(T1), blow to oblique angle(T2) and blow to right angle(T3). Feed intake milk yield, respiration rate, rectal temperature and plasma cortisol concenration were measured to investigate the effect of hot environment on the physiological, productive responses in lactating dairy cows. The results obtained are summarized as follows: The daily milk yields were 20.47, 22.82 and 24.31kg per head in T1, T2 and T3 during experimental period, respectively. The respiration rate was significantly (p<0.05) higher in T1 than those of T2 and T3. The rectal temperature in T1(39.4$^{\circ}C$) was higher than those of T2(39.1$^{\circ}C$), (P<0.05). The plasma cortisol concentration was higher in T1 than those of T2 and T3(P<0.05). It was suggested that blowing fan installed in the pen was effective means to reduce heat stress.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권6호
• /
• pp.309-313
• /
• 2002

In this paper, we have studied minimization of the kerf-width and surface burning, which occurred after the conventional singulation process of the multi-layer BGA board with copper, polyethylene and epoxy glass fiber. The high thermal energy of a pulsed Nd:YAG laser is used to cut the multi-layer board. The most considerable matter in the laser cutting of the multi-layer BGA boards is their different absorption coefficient to the laser beam and their different heat conductivity. The cut mechanism of a multi-layer BGA board using a 2$^{nd}$ harmonic Nd:YAG laser is the thermal vaporization by high temperature rise based on the Gaussian profile and copper melting point. In this experiment, we found that the sacrifice layer and Na blowing are effective in minimizing the surface burning by the reaction between oxygen in the air and the laser beam. In addition, N2 blowing reduces laser energy loss by debris and suppresses surface oxidation. Also, the beam incidence on the epoxy layer compared to polyimide was much more suitable to reduce damage to polyimide with copper wire for the multi layer BGA singulation. When the polyester double-sided tape is used as a sacrifice layer, surface carbonization becomes less. The SEM, non-contact 3D inspector and high-resolution microscope are used to measure cut line-width and surface morphology.

• Elastomers and Composites
• /
• 제16권1호
• /
• pp.3-13
• /
• 1981

The purpose of this dissertation is to study the physical properties of cellular rubber products for industrial use. Vulcanization characteristics were investigated by usingcure curve that had obtained by means of Rheometer. The results of physical properties, vulcanization characteristics and foaming states are as follows. 1. The test results for vulcanization characteristics of NR compounds indicated that in the recipe R-1. When accelerator D is used, the optimum conditions of vulcanizate are obtained, while formula R-2 and R-3 have shown higher torgue at curing time, $1{\sim}2$ minutes. Cellular rubber product test in terms of compression set and compression deflection has also met the requirements of SAE. 2. For SBR compounds, S-1 formula was the best in terns of vulcanization characteristics, and for the blowing structure of cellular rubber products, formula S-3 in which accelerator M is added was fair. All other test results, such as compression set and compression deflection properties met SAE requirements. 3. NBR compound (N-1) including accelerator TT was the best in terms of vulcanization characteristic and also blowing structure. All other properties listed above met requirements, particulary for oil resistance test. 4. In the test of EPDM compounds, when mixed accelerator, M and TT, is used(formula E-1) the best results were obtained. Since EPDM is hydrocarbon elastomer, oil resistance test failed. All other properties met the requirement specified in SAE.

• 한국산업융합학회 논문집
• /
• 제2권1호
• /
• pp.19-25
• /
• 1999

A new urban design method from the viewpoint of climate is considered to be desired for urban life. The authors verified on an environmental planning based on new urban design concept which introduced the effect of sea breeze blowing along canals. The field observation of urban thermal environment were carried out to examine the cooling effects of a river through city. The observations were conducted to find the effect of a sea breeze and climate in summer along canals. Effective distance from the sea and cooling effect of the sea breeze on urban temperature was analyzed. The thermal index using outdoor environment was modified with New Effective Temperature ET*. On the basis of the observation. Human thermal comfort is relieved and affected by sea breeze blowing along canals. The canals were utilized as the trail on which sea breeze blows towards the center of city. From these results, The wind trail is one of the effective passive design method from the viewpoint of urban climate.

• 한국지반환경공학회 논문집
• /
• 제13권2호
• /
• pp.41-47
• /
• 2012

본 연구는 담수미세조류의 일종인 클로렐라를 적색 발광다이오드를 이용하여 효율적으로 배양하기 위한 조건을 찾기 위해 수행되었다. 클로렐라 배양에 최적인 광량을 찾기 위해 광량을 조절하여 클로렐라가 포함된 반응기에 각각 조사하여 성장속도 및 셀농도를 측정하였다. 적색파장 사용 시, 광량이 증가할수록 성장속도는 광량에 비례하여 증가하였으나 셀농도는 지속적으로 감소하였다. 공기 공급에 따른 성장특성을 살펴보기 위해 반응기에 미세공기를 연속적으로 주입하였는데, 반응속도 및 셀농도는 공기를 주입하지 않은 경우에 비해 2배와 10배 증가함을 알 수 있었다. 고농도의 이산화탄소 주입의 경우에는 배지의 pH가 3이하로 저하되어 클로렐라의 성장이 감소하는 것을 알 수 있었다. 본 연구를 통해 클로렐라를 효과적으로 배양하기 위해서는 적색파장의 발광다이오드를 광원으로 사용하고 반응기에 공기를 연속적으로 주입하는 것이 효과적임을 알 수 있었다.

• Fibers and Polymers
• /
• 제1권2호
• /
• pp.97-102
• /
• 2000

Pitch precursors were synthesized from coal tar(CT) and pyrolysis fuel oil(PFO, petroleum residue oil) at relatively low temperature of $250^{\circ}$, in the presence of horontrifluorideidiethyletherate complex(BFDE) as a catalyst and nitrobenzene(NB) as a co-catalyst. The softening point, nitrogen content and carbon yield increased with an increase of concentration of NB. The pitch precursors with good spinnability were prepared by removing the volatile components through $N_2$ blowing. The precursor pitches were spun through a circular nozzle, stabilized at $310^{\circ}$ and finally carbonized at $1000^{\circ}$. The optically anisotropic structure formed at the absence of NB was changed into isotropic structure, showing a decrease in size of the flow domain. The hollow carbon fiber could be prepared in the process of stabilization. The results proposed that the morphology of carbon materials could be controlled by changing the concentration of catalyst and/or co-catalyst and/or stabilization condition that affect on the mobility of molecules during carbonization.

• International Journal of Safety
• /
• 제4권2호
• /
• pp.24-29
• /
• 2005

An experimental study was presented for extinguishing characteristics of liquid fuel fire by water mist($Dv_{0.99}{\leq}200{\mu}m$) containing potassium acetate and sodium acetate trihydrate. To evaluate the extinguishing performance of water mist containing additives, the evaporation characteristics of a water droplet on a heated surface was examined. The evaporation process was recorded by a charge-coupled-device camera. Also, small-scale extinguishing tests were conducted for n-heptane pool fire in ventilated space. During the experiments, flame temperatures were measured, and concentrations of oxygen and carbon monoxide were analyzed by a combustion gas analyzer. The average evaporation rate of water droplet containing additives was lower than that of pure water at a given surface temperature and decreased with the concentration increase due to the precipitation of salt in the liquid-film and change of surface tension. In case of using additives, the fire extinguishing times was shorter than that of pure water at a given discharge pressure and it was because the momentum of a water droplet containing additives was increased. And also dissociated metal atoms, potassium or sodium, were reacted as a scavenger of the major radical species OH, H which were generated for combustion process. Moreover, at a high pressure of 4 MPa, the fire was extinguished through blowing effect as well as primary extinguishing mechanisms.

• 동력기계공학회지
• /
• 제7권2호
• /
• pp.17-22
• /
• 2003

As side-by-side refrigerators came into existence, there has been a growing concern about the free%ins-up of the vital equipment in a walk-in freezer. Due to a bad performance, customers are experiencing too much frustration. In order to minimize the freezing phenomena, the numerical simulation has been performed on the characteristics of cold air flow in a side-by-side refrigerator. The flow field has been simulated with a standard $k-\varepsilon$ turbulent model and a SIMPLE algorithm based on the finite volume method. Through the results of the analysis of the pattern of cold air flow, finally the shape of outlet for cold air flow was modified. The present model was compared with the modified model. The latter was better than the former in minimizing the freezing phenomena.

• 생명과학회지
• /
• 제16권1호
• /
• pp.1-5
• /
• 2006

본 연구는 Penibacillus polymyxa 균주의 CFTase 유전자를 결손 변이시킨 고효율 효소 CFT108을 이용하여 cyclofructan (CF)의 대량생산 조건을 검토하고 생산된 CF의 순수 분리 정제 공정을 개발하였다. CF의 대량생산 조건은 $2\%$의 inulin 기질과 40 unit/g inulin의 기질에서 3시간 반응시켰을 때 최대 생산량 9.5 g/l의 수율을 달성할 수 있었으며, 이때의 in-ulin의 CF 전환율은 $47.5\%$였다. 생산된 CF를 순수 분리 정제하기 위해서 CFTase 반응액 을 exoinulinase 1 unit/ml로 6시간 처리하여 미 반응 inulin을 단당화시켰으며, 유리된 fructose는 $3\%$ CaO로 $CO_2$가스 하에서 $80^{\circ}C$, 10분간 3회 흡착제거 시킴으로써 순수 정제하였다. 정제된 CF를 HPLC로 확인한 결과 정제도는 $95\%$ 이상이였으며, $CF_6,\;CF_7,\;CF_8$ 비율이 72 : 27 : 1 이였다.