• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1089-1094
• /
• 2011

To treat non-point source pollution in Juam lake, removal efficiencies of pollutants were investigated in Bongsan constructed wetlands (CWs) at different treatment time, stages and wastewater loads. The constructed wetlands consisted of forebay, $1^{st}$ and $2^{nd}$ wetlands. The concentrations of BOD, SS, T-N, and T-P in inflow were $1.87mg\;L^{-1}$, $1.62mg\;L^{-1}$, $11.47mg\;L^{-1}$, and $4.40mg\;L^{-1}$, respectively. The removal rates of BOD, SS, T-N, and T-P in Bongsan CWs were 26, 18, 16 and 9%, respectively. The removal rates of BOD and T-N were higher than those for SS and T-P. The amounts of pollutant removal in Bongsan CWs were higher in the order of forebay > $1^{st}$ wetland > $2^{nd}$ wetland for BOD, forebay > $2^{nd}$ wetland > $1^{st}$ wetland for SS, $1^{st}$ wetland > forebay > $2^{nd}$ wetland for T-N and $2^{nd}$ wetland > forebay > $1^{st}$ wetland for T-P.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.459-464
• /
• 2001

Leaf disks from cultivar 'Kennebec' and one selection line (ND 860-2) were cultured on Murashige-Skoog medium with various combinations of indole acetic acid (IAA) and zeatin riboside. Shoots, roots and callus were induced at various combinations of plant growth regulator levels. The medium containing $3.5mg{\cdot}L^{-1}$ IAA and $4.0mg{\cdot}L^{-1}$ zeatin riboside produced the most plantlets. Rooted regenerants were grown in the greenhouse. The growth of regenerated plants obtained from the MS medium supplemented with $7.0mg{\cdot}L^{-1}$ IAA and $3.0mg{\cdot}L^{-1}$ zeatin riboside was significantly greater than those grown from nodal expalnts. In ND 860-2, a leaf chimera with chlorophyll deficient (light yellow) sectors was found in plants regenerated fiom leaf disks (grown on MS medium supplemented with $3.5mg{\cdot}L^{-1}$ IAA and $3.0mg{\cdot}L^{-1}$ zeatin riboside) but not in plants grown from nodal explants. The phenotypic variability was also observed in the tuber number, size and weight.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.2 s.19
• /
• pp.19-28
• /
• 2003

It is the purpose of this study to investigate the change of stream water quality in upper stream of Dongjin river, and to give the basic information for the conservation of water quality. Water samples were taken periodically at 9 sampling sites during 8 months from March to October in 2002. The results of this study were as follows : 1. The water temperature and pH of stream water were ranged $9.0{\sim}29.4^{\circ}C,\;6.48{\sim}9.33$, respectively. The COD values of stream water was ranged from 0.60 to 19.06. The contents of T-N and T-P mainly affected by the livestock wastes, and agricultural activity were $1.88{\sim}6.74\;mg/L$, ND(not deleted)${\sim}0.50\;mg/L$, respectively. 2. The SS, DO and BOD values of stream water were ranged $0.4mg/L{\sim}274.0mg/L$, $0.5{\sim}6.0\;mg/L$, and $7.3{\sim}13.7\;mg/L$ respectively. 3. The cation is one of the important components in analysis of stream water quality. The contents of analysis, $Ca^{++},\;Mg^{++},\;Na^+$ and $K^+$ were ranged $1.96{\sim}11.08\;mg/L$, $1.21{\sim}6.16\;mg/L$, $3.38{\sim}18.44\;mg/L$, $1.12{\sim}7.96\;mg/L$, respectively. SAR was ranged $0.31{\sim}1.63$ below 2.0. The contents of cation showed in the order $Na^{++}>Ca^{++}>K^+>Mg^+$. 4. The contents of heavy metal Zn, Cu, and Pb were $ND{\sim}0.071\;mg/L$, $ND{\sim}0.012\;mg/L$, and $ND{\sim}0.043\;mg/L$, respectively. Cd was not detected in all samples. 5. As a result of these researches showed water quality in upper stream watershed of Dongjin river more affected by livestock wastes and living sewage than agricultural activity.

• Korean Journal of Crystallography
• /
• v.5 no.2
• /
• pp.51-66
• /
• 1994

Y3Al5O2 and Nd: Y3Al5012 single crystals were grown by Czochralskl technique. The effectt of pulling rate rotation rate, and doping level of Nd3+ ion on the crystal quality were studied Various types of defects were analysed by photo-elastic effect and chemical etching method Finally, spectroscopic and laser poputies of grown crystal were measured. Optirmum pulling rate for good quality was dependant on the doping level of Nd3+ ion. It was found that the suitable pulling rates for pure Y3Al5O12 for 3.0∼3.5 a/o Nd3+ ion doped Y3Al5012 and for more than 40 a/o Nd3+ ion doped Y3Al5012 were 2∼4mm/hr, 0.6∼0.5mm/hr, and less than 0.4mm/hr respectively. Solid-liquid interface was convex at the rotation rate of 27∼60rpm, and concave at the rotation rate of 80∼100rpm. Growth axis was confired to <111> direction and lattice parameter was measured to 12.017A. Core (211) facets,striations, inclusions of metal particles, dislocations and optical inhonngeneities were detected. Four level laser transition of Nd3+ion in YIAls012 single crystal were identified by the spectroscopic measurements. Laser rod with tam diameter and 63mm length was fabricated from grown Nd3+ Y3Al5012 sin91e crystals. 1.8lJ of lasing threshould and 0.49% of soope efficiency were measured by the Pulsed laser action.

• Journal of Biomedical Engineering Research
• /
• v.17 no.4
• /
• pp.491-498
• /
• 1996

The development of a compact two-wavelength Nd:YAG laser for dental and ENT applications is presented. The Nd:YAG resonator generates either 1.06$\mu$m or 1.32$\mu$m. The wavelength selection is made at the control panel. The Nd:YAG laser parameters at 1.06$\mu$m are ; the maximum pulse duration of 150$\mu$s, repetition rates of I-100Hz, and the maximum average power of 25W. At 1.32$\mu$m, the pulse duration is the same where the repetition rates and the maximum average power are I-30Hz and lOW respectively. High voltage power supply consists of a simmer module and two identical high voltage DC converters. In order to make a complete medical laser system, an optical fiber delivery unit, foot pedal and water spray handpiece are also developed. The wavelength selection is reliable since no movement of optical or mechanical components is required. The high voltage power supply is compact, easy to be maintained and applicable for other laser systems due to its modular design.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.22-29
• /
• 2014

Recycling process of iron should be developed for efficient recovery of neodymium (Nd), rare metal, from acid-leaching solution of Nd magnet. In this study, $FeCl_3$ solution as iron source was used for preparation of iron nano particles with the condition of various factors, such as, reductant, and surfactant. $Na_4P_2O_7$ and Polyvinylpyrrolidone (PVP) as surfactants, $NaBH_4$ as reductant, and palladium chloride ($PdCl_2$) as a nucleation seed were used. Iron powder was analyzed by using XRD, SEM for measuring shape and size. Iron nano particles were prepared at the ratio of 1:5 (Fe (III) : $NaBH_4$). Size and shape of iron particles were round-form and 50 ~ 100 nm size. Zeta-potential of iron at the 100 mg/L of $Na_4P_2O_7$ was negative value, which was good for dispersion of metal particle. When $Na_4P_2O_7$ (100 mg/L), PVP($FeCl_3:PVP$ = 1 : 4, w/w) and Pd($FeCl_3:PdCl_2$ = 1 : 0.001, w/w) were used, iron nano particles which were round-shape, well-dispersed and near 100 nm-sized range. In this condition, $FeCl_3$ solution changed with spent Nd leachate solution, and then it is possible to be made round-formed iron nano particles at pH 9 and at the reaction bath over 20 L which is not include any surfactant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.603-606
• /
• 2004

ZnO varistor ceramics were fabricated with variation of addition of $Nd_2O_3$ amount and the sintering temperature was $l150^{/circ}C$. The average grain sizes were showed decreased from $13.8{\mu}m$ to $4.7{\mu}m$, and varistor voltages were increased from 398 V to 657 V by added amount of $Nd_2O_3$. Nonlinear coefficient a of all were with increasing the amount of $Nd_2O_3$ more than 60, in case of added on 0.1mol% $Nd_2O_3$ was 87. And leakage current were less than $1_{\mu}A$ with applied at 82% of varistor voltage. The clamping voltage ratio of the specimes added 0.1mol% $Nd_2O_3$ was 1.38 at applied 25A [$8/20{\mu}s$]. In the specimen added 0.1mol% $Nd_2O_3$, endurence of surge current and deviation of varistor voltage were 7000A/$cm^2$, $\Delta-2.08%$, respectively.

• Proceedings of the Ginseng society Conference
• /
• 1990.06a
• /
• pp.15-19
• /
• 1990

We have been isolating various physiologically active substances from non-saponin fraction of Korean Red Ginseng These are adenosine, gyro-glutamic acid, dencichine and acidic polysaccharide. Adenosine and gyro-glutamic acid are loom to inhibit epinephrine-induced lipolysis in fat cells and stimulate the insulin-mediated lipogenesis. In addition to these actions, adenosine was found to inhibit both norepinephrine- and histamine-induced aorta constriction, and pyre·glutamic acid inhibits angiotensin-converting enzyme. Dencichine stimulated histamine-induced aorta constriction. Finally, acidic polysaccharide was found to inhibit both lipolytic and anorexigenic actions of Toxohormone-L. Based on these experimental results, I presented a brief review on these compounds isolated from non- saponin fraction of Korea Red Ginseng. Keywords Panax ginseng, Korean red ginseng, adenosine, pyroglutamic acid, dencichine, acidic polysac- charide, lipolysis, lipogenesis, angiotensin-converting enzyme, toxohormone-L.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.7
• /
• pp.463-468
• /
• 2017

For transdermal drug delivery, needless injection system is composed of laser and microjet injector. Main mechanism of microjet injector is the laser-induced bubble. Nd:YAG and Er:YAG laser are used as a power source. Laser parameters such as pulse duration and wavelength are considered, which are core parameters to control the bubble motion. The Nd:YAG laser, pulse duration is short than bubble life time making cavitation like bubble while in Er:YAG laser, long pulse duration and high absorption in water drive bubble as a boiling bubble. Detailed motion of bubble and microjet is captured by the high speed camera. So it is observed that microjet characteristics are determined by the bubble behavior. The performance of drug delivery system is evaluated by fluorescent staining of guinea pig skin.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.5
• /
• pp.563-566
• /
• 2010

Using an open-circuit system, we compared the methane ($CH_4$) emission from dry cows fed first-cut Timothy silage ($1^{st}$ TY), second-cut Timothy silage ($2^{nd}$ TY), second-cut Italian ryegrass silage ($2^{nd}$ IR), third-cut Italian ryegrass silage ($3^{rd}$ IR), or second-cut red clover silage ($2^{nd}$ RC) as the sole feed. The methane emission ranged from 258.2 L $day^{-1}$ to 396.5 L $day^{-1}$. The methane emission from dry cows fed red clover silage was relatively lower than that from dry cows fed grass silage. However, the methane emission per unit digestible neutral detergent fiber (NDF) intake (dNDFI) did not differ significantly between the experimental silages. The methane emission was significantly correlated with the NDF intake and digestibility. Methane emission had a significant correlation with the quadratic function of dNDFI. The differences in the daily volume of methane emission from cows fed different forages can be explained by dNDFI.