• Korean Journal of Metals and Materials
• /
• v.48 no.6
• /
• pp.523-532
• /
• 2010

Co-application of organic coating and cathodic protection has not provided enough durability to low-alloyed steels inseawater ballast tank (SBT) environments. An attempt has made to study the effect of alloy elements (Al, Cr, Cu, Mo, Ni, Si, W) on general and localized corrosion resistance of steels as basic research to develop new low-allowed steels resistive to corrosion in SBT environments. For this study, we measured the corrosion rate by the weigh loss method after periodic immersion in synthetic seawater at $60^{\circ}C$, evaluated the localized corrosion resistance by an immersion test in concentrated chloride solution with the critical pH depending on the alloy element (Fe, Cr, Al, Ni), determined the permeability of chloride ion across the rust layer by measuring the membrane potential, and finally, we analyzed the rust layer by EPMA mapping and compared the result with the E-pH diagram calculated in the study. The immersion test of up to 55 days in the synthetic seawater showed that chromium, aluminium, and nickel are beneficial but the other elements are detrimental to corrosion resistance. Among the beneficial elements, chromium and aluminium effectively decreased the corrosion rate of the steels during the initial immersion, while nickel effectively decreased the corrosion rate in a longer than 30-day immersion. The low corrosion rate of Cr- or Al-alloyed steel in the initial period was due to the formation of $Cr_2FeO_4$ or $Al_2FeO_4$, respectively -the predicted oxide in the E-pH diagram- which is known as a more protective oxide than $Fe_3O_4$. The increased corrosion rate of Cr-alloyed steels with alonger than 30-day exposure was due to low localized corrosion resistance, which is explained bythe effect of the alloying element on a critical pH. In the meantime, the low corrosion rate of Ni-alloyed steel with a longer than 30-day exposure wasdue to an Ni enriched layer containing $Fe_2NiO_4$, the predicted oxide in the E-pH diagram. Finally, the measurement of the membrane potential depending on the alloying element showed that a lower permeability of chloride ion does not always result in higher corrosion resistance in seawater.

• Journal of Sasang Constitutional Medicine
• /
• v.17 no.3
• /
• pp.31-54
• /
• 2005

1. Objectives This paper was written in order to understand the function of acupoints as Sasang Constitution. 2. Methods Through the concept of ${\ulcorner}$Seung-Gang-Wan-Sok(升降緩束)${\lrcorner}$, we could find out the function of some acupoints as Sasang Constitution. 3. Results and Conclusions 1) Some acupoints could be classified into four groups. These four groups are corresponded with four Sasang Constitutional groups 2) This four groups are supported by the concept of ${\ulcorner}$Seung-Gang-Wan-Sok(升降緩束)${\lrcorner}$. 3) The first group is for Soeumin(少陰人). The acupoints are 'Sangwan(上脘, CV13)', 'Chungwan(中脘, CV12)', 'Hwangsu(?兪, K16)', 'chonchu(天樞, S25)' and 'Wisu(胃兪, B21)'. These acupoints all have Seung(升: elevating Gi(氣))-function in their Oriental medical effects 4) The second group is for Soyangin( 少陽人). The acupoints are 'Kichung(氣衝, S30)', 'Choksamni(足三里, S36)', 'Sangohu(上巨虛, S37)', 'Hagoho(下巨虛, S39)', 'Haegye(解谿, S41) and 'hyonjong(懸鍾, G39)'. These acupoints all have Gang(降: descending Gi(氣))-function in their Oriental medical effects. 5) The third group is for Taeumin(太陰人). The acupoints are 'Oje(魚際, L10)', ' Taeyon(太淵, L9)', 'Taedo(大都, Sp2)', 'Taebeak(太白, Sp3)' and 'Nohoe(?會, TE13)‘. These acupoints all have Wan(緩: efferenting Gi(氣))-function in their Oriental medical effects. 6) The fourth group is for Taeyangin(太陽人). The acupoints are 'Kwanwon(關元, CV4)', 'Hawan(下脘, CVlO)’ and ‘Chungjong(中庭, CVI6)’. These acupoints all have Sok(束: afferenting Gi(氣))-function in their Oriental medical effects.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1356-1364
• /
• 2014

A new conjugated copolymer, poly{4,8-bis(triisopropylsilylethynyl)benzo[1,2-b:4,5-b']dithiophene-alt-4,7- bis(5-thiophen-2-yl)-5,6-difluoro-2-(heptadecan-9-yl)-2H-benzo[d][1,2,3]triazole} (PTIPSBDT-DFDTBTz), is synthesized by Stille coupling polycondensation. The synthesized polymer has a band gap energy of 1.9 eV, and it absorbs light in the range 300-610 nm. The hole mobility of a solution-processed organic thin-film transistor fabricated using PTIPSBDT-DFDTBTz is $3.8{\times}10^{-3}cm^2V^{-1}s^{-1}$. Bulk heterojunction photovoltaic cells are fabricated, with a conventional device structure of ITO/PEDOT:PSS/polymer:$PC_{71}BM$/Ca/Al ($PC_{71}BM$ = [6,6]-phenyl-$C_{71}$-butyric acid methyl ester); the device shows a power conversion efficiency (PCE) of 2.86% with an open-circuit voltage ($V_{oc}$) of 0.85 V, a short-circuit current density ($J_{sc}$) of 7.60 mA $cm^{-2}$, and a fill factor (FF) of 0.44. Inverted photovoltaic cells with the structure ITO/ethoxylated polyethlyenimine/ polymer:$PC_{71}BM/MoO_3$/Ag are also fabricated; the device exhibits a maximum PCE of 2.92%, with a $V_{oc}$ of 0.89 V, a $J_{sc}$ of 6.81 mA $cm^{-2}$, and an FF of 0.48.

• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.275-282
• /
• 2010

2-Fluorocyclopropanemethanol and 2-chlorocyclopropanemethanol have been studied with MP2 and B3LYP methods with 6-311++G(d,p) basis set. The optimized structures show several stable conformers. The most stable conformer show the possibility of intramolecular hydrogen bonding, but the distance between $H{\cdots}F$, or $H{\cdots}Cl$ is longer than van der Waals radii and it may not be strong covalent bonding. Rather the second stable conformer has optimum structure for intramolecular hydrogen bonding but the energy of the conformer is 5 ~ 7 kJ higher than the most stable conformer. When the methanol group and the F or Cl atom have opposite direction, the conformers are less stable than the most stable conformer.

• Journal of the Korean Geophysical Society
• /
• v.5 no.2
• /
• pp.87-97
• /
• 2002

P wave travel-time delays have been analyzed and average travel-time anomalies due to lateral variation of the crustal structure have been calculated at the broad-band earthquake observatories of Korea Meteorology Administration (KMA) using the teleseismic deata collected during the period from 2000 to 2001. Maximum variation in the relative travel-time residuals is almost 1.5 seconds Azimuthal variation in the travel-time residuals is observed to indicate the existence of lateral P velocity heterogeneity beneath the stations with velocity contrasts of -4~4%. The estimated average travel-time delays are ranging from 0.05 to 0.3 seconds at the stations including Seoul, Chuncheon, Kanneung, Uljin, and Ulleung Island showing slow velocity contrasts of 0~4% P through the crust. Faster velocity contrasts of 0~4% have been observed at the stations including Seosan, Taejeon, Daegu, Seoguipo, and Busan showing average travel-time delays ranging from -0.05 to -0.3 seconds.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.2
• /
• pp.201-212
• /
• 2002

This study investigated the shear bond strengths between abrasion-resistant denture teeth and composite resins according to surface treatments. Denture teeth for this study were Trubyte IPN teeth(Dentsply Inc., USA) with interpenetrating polymer network and Endura Posterio (Shofu Inc. Japan) of composite resin teeth, and restorative composite resins were Clearfil FII (Kuraray, Japan) of the self-cured composite resin and Z100(3M Dental Product, USA) of the light-cured composite resin. Five different surface treatments were evaluated: (1) $50{\mu}m\;A1_2O_3$ sandblasting: (2) #100 carbide paper; (3) chloroform; (4) retentive holes; and (5) no treatment. After surface treatments, denture teeth were examined by scanning electron microscopy(SEM), and the maximum shear bond strengths between abrasion-resistant denture teeth and composite resins were measured using Instron. The results were as follows; 1. IPN teeth treated with sandblasting had the highest shear bond strength, and Endura treated with sandblasting and carbide paper had significantly greater shear bond strength than with any other surface treatment. 2. Regardless or composite resins, the shear bond strength on Endura was greater than on IPN teeth. 3. Regardless of denture teeth, the shear bond strength of Clearfil FII was greater han of Z100. 4. In appearance of SEM, IPN teeth treated with sandblasting showed generalized roughness on the all of surface, however, carbide paper treatment resulted in partly rough. Endura treated with sandblasting and carbide paper showed similar surface characteristics. Wetting denture teeth surface with chloroform removed the debris and created a particle-free and smooth surface.

• The Korea Journal of Herbology
• /
• v.26 no.3
• /
• pp.47-56
• /
• 2011

Objectives : This study investigated whether the water extract of Spatholobi Caulis (SCE) has the ability to protect hepatocyte against oxidative stress induced by tert-butylhydroperoxide (tBHP) in vitro and $CCl_4$ in vivo. Methods : In vitro, HepG2 cells pre-treated with Spatholobi Caulis water extract (1, 3, 10, $30{\mu}g$/ml) for 12h and further incubated with tBHP ($100{\mu}M$) for the next 12h. Cell viability was assessed by MTT assay. In vivo, rats were orally administrated with the aqueous extract of Spatholobi Caulis (SCE; 50, 100 mg/kg) for 4 days and then, injected with $CCl_4$ 1 mg/kg body weight to induce acute liver damage. Results : Treatment with SCE inhibited cell death induced by tBHP, as evidenced by alterations in the levels of the proteins associated with apoptosis:SCE prevented a decrease in $Bcl_2$, and cleavage of poly(ADP-ribose)polymerase and pro-caspase-3. Moreover, SCE inhibited the ability of tBHP to generate $H_2O_2$ production, thereby restoring GSH content. Moreover, SCE treatments in rats effectively decreased liver injuries induced by a single dose of $CCl_4$, as evidenced by decreases in hepatic degeneration and inflammation as well as plasma alanine aminotransferase and lactate dehydrogenase activities. Consistently, treatments of SCE also protected liver in rats stimulated by $CCl_4$, as indicated by restoration GSH and prevention of MDA in the liver. Conclusions : SCE has the ability 1) to protect hepatocyte against oxidative stress induced by tBHP and 2) to prevent $CCl_4$-inducible acute liver toxicity. Present findings may be informative not only in elucidating the pharmacological mechanism of Spatholobi Caulis, but in determining its potential application for oxidative cellular damage in the liver.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.1
• /
• pp.3-12
• /
• 2001

During ozonation process, the hydroxyl radical generation rates were measured under different experimental conditions (ozone feed rate, nitrobenzene concentration, hydroxyl radical scavenger, pH, HO$_2$O$_2$/O$_3$ etc.) Nitrobenzene could be decomposed by hydroxyl radical rather than ozone only and nitrobenzene decomposition rate was expressed with functions of ozone and nitrobenzene concentration. The rate was decreased as the hydroxyl radical scavenger concentration was increased, and all results were followed pseudo first-order reaction. Using a competitive method, hydroxyl radical generation rate was measured with probe compound and scavenger. It was proportional to ozone concentration, and 0.24mo1 of hydroxyl radical was produced with 1mol of ozone. Under different pH conditions, hydroxyl radical generation rates were measured (pH 10.2 (0.91Ms$^{-1}$ ) > pH 7.3 (0.72Ms$^{-1}$ ) > pH 5.6 (0.67Ms$^{-1}$ ) > pH 3.4 (0.63Ms$^{-1}$ )) showing higher generation rate at high pH values. Addition of hydrogen peroxide promoted the generation rate of hydroxyl radical. Considering the results of pH experiments and addition of hydrogen peroxide experiments, the hydroxyl radical generation rate was 1.6 times higher in hydrogen peroxide solution than in high pH solution, indicating addition of hydrogen peroxide is better promoter to produce the hydroxyl radical in ozonation. These results could be applied to AOPs to remediate the contaminated wastewater and groundwater.

• Journal of the Korean Chemical Society
• /
• v.43 no.4
• /
• pp.447-455
• /
• 1999

Allyl (5R)-(Z)- and (5R)-(E)-6-[(2S)-2,3-isopropylidenedioxypropylidene]Penicillanate(10a and 10b) were prepared from allyl (5R)-dibromopenicillanate(6) via a sequence of reactions involving condensation with 2,3-O-isopropylidene-D-glyceraldehyde, reduction with $Zn-NH_4OAc$, and Mitsunobu elimination. Deprotection of isopropylidene and allyl groups of 10a gave potassium (5R)-(Z)-6-[(2S)-2,3-dihydroxypropylidene]penicillanate(4). However, deprotection of isopropylidene group of 10b afforded ${\alpha},\;{\beta}$-unsaturated-lactone(12). Allyl (5R)-(Z)- and (5R)-(E)-6-[(2S)-2-(t-butyldimethlsilyloxy)propylidene]penicillanate(18a and 18b) were prepared from ally (5R)-dibromopenicillanate(6) via a sequence of reactions involving condensation with (2S)-2-(t-butyldimethylsilyloxy)propanal(15), reduction with $Zn-NH_4OAc$ and Mitsunobu elimination or mesylation-elimination. Deprotection of t-butyldimethylsilyl and allyl groups of 18a and 18b gave potassium (5R)-(Z)- and (5R)-(E)-6-[(2S)-2-hydroxypropylidene]penicillanate(5a and 5b), respectively.

• International Journal of Oral Biology
• /
• v.39 no.2
• /
• pp.97-105
• /
• 2014

The aim of this study was to determine the beneficial effect of propofol on human keratinocytes that have undergone hypoxia reoxygenation (H/R) injury and to investigate whether autophagy is associated with the protective mechanism. Thus, we evaluated how propofol influences the intracellular autophagy and apoptosis during the H/R process in the HaCaT cells. The cultured human keratinocyte cells were exposed to 24 h of hypoxia (5% $CO_2$, 1% $O_2$, 94% $N_2$) followed by 12 h of reoxygenation (5% $CO_2$, 21% $O_2$, 74% $N_2$). The experiment was divided into 4 groups: (1) Control=Normoxia ; (2) H/R=Hypoxia Reoxygenation ; (3) PPC+H/R=Propofol Preconditioning+Hypoxia Reoxygenation; (4) 3-MA+PPC+ H/R=3-MA-Methyladenine+Propofol Preconditioning+ Hypoxia Reoxygenation. In addition, Western blot analysis was performed to identify the expression of apoptotic pathway parameters, including Bcl-2, Bax, and caspase 3 involved in mitochondrial-dependent pathway. Autophagy was determined by fluorescence microscopy, MDC staining, AO staining, and western blot. The H/R produced dramatic injuries in keratinocyte cells. In our study, the viability of Propofol in H/R induced HaCaT cells was first studied by MTT assay. The treatment with 25, 50, and $100{\mu}M$ Propofol in H/R induced HaCaT cells enhanced cell viability in a dose-dependent manner and $100{\mu}M$ was the most effective dose. The Atg5, Becline-1, LC3-II, and p62 were elevated in PPC group cells, but H/R-induced group showed significant reduction in HaCaT cells. The Atg5 were increased when autophagy was induced by Propofol, and they were decreased when autophagy was suppressed by 3-MA. These data provided evidence that propofol preconditioning induced autophagy and reduced apoptotic cell death in an H/R model of HaCaT cells, which was in agreement with autophagy playing a very important role in cell protection.