• Journal of the Korean Ceramic Society
• /
• v.33 no.11
• /
• pp.1209-1216
• /
• 1996

MoSi2-Al2O3 composites were prepared by thermal explosion mode of self-propagating high temperature syn-thesis (SHS) using element powders of MoO3 Mo Si and Al. The combustion products of MoSi2 which have 10, 20, 30 and 40 wt% Al2O3 showed the molten state in the range of Mo to MoO3 6:1-9.5:1, 2:1-8:1, 1:1-5:1, and 1:1-3:1 (molar ratio) respectively. The combustion products which made least seperation the molten phase from the slag phase were in Mo/MoO3=9, 5:1, 8:1, 5:1 and 3:1 (molar ratio) respectively. Particles size of MoSi2 and Al2O3 in the combustion product were decreased as the molar ratio of Mo to MoO3 increase. By XRD analysis only MoSi2 and $\alpha$-Al2O3 peaks were identified in the combusion products, In case of MoSi2 containing 20wt% Al2O3 5.1wt% Al existed into MoSi2 grains and 30.7wt% Si and 7.7wt% Mo existed into Al2O3 grains. The relative density of MoSi2 containing 10, 20, 30 and 40 wt% Al2O3 were 82.7, 85.2, and 81.9% respectively. The fracture strength of MoSi2-Al2O3 composites increased with increasing Al2O3 and that of MoSi2-20wt% Al2O3 composite was 195 MPa.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.231-236
• /
• 1999

Several series of morphologically controlled $MoO_3$/$SiO_2$ catalysts were prepared, characterized, and tested for hydrodesulfurization (HDS) of dibenzothiophene (DBT) activity. Molybdenum surface loaded with 4.0 atoms $Mo/nm^2$ was prepared as sintered hexagonal and sintered orthorhombic, as well as a novel "well dispersed hexagonal" phase. Characterization by XRD, Raman, and $O_2$ chemisorption results reveals that the dispersion of $MoO_3$ over silica depends on the final $MoO_3$ phase in the order of; sintered hexagonal < sintered orthorhombic < dispersed hexagonal phase. Temperature programmed reduction (TPR) results show that both bulk and dispersed microcrystalline of $MoO_3$ reduce to $MoO_2$ at $650^{\circ}C$ and to Mo metal at $1000^{\circ}C$. HDS of DBT was performed in a differential reactor at 30 atm over the temperature range $350{\sim}500^{\circ}C$. Activity of $MoO_3$/$SiO_2$ toward HDS of DBT is proportional to dispersion.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.861-868
• /
• 1996

Skeletal isomerization reaction known as exothermic reaction shows possible maximum yield of i-butene from n-butene at $110^{\circ}C$ over $Pt/MoO_3/SiO_2$. Compared with conventional catalyst such as silica, zeolite, alumina etc., $Pt/MoO_3/SiO_2$ demonstrates higher yield while by-products except 2-butene do not form. Faster H spillover rate over $Pt/MoO_3/SiO_2$ is demonstrated via isothermal reduction experiment at $110^{\circ}C$ compared to the rate over $Pt/MoO_3/Al_2O_3$. Overall isomerization rates are proportional to higher spillover rates from Pt onto $MoO_3$ surface. The skeletal isomerization reaction is composed of two elementary steps. First, carbonium ion formation over Pt crystallites by H spillover. Second, carbenium ion formation over $MoO_3$ followed by formation of i-butene. Moreover, it is suggested that H spillover step from Pt surface onto $MoO_3$ is assumed to be the rate determining step and control the overall isomerization rate.

• Journal of the Korean Ceramic Society
• /
• v.32 no.9
• /
• pp.1085-1091
• /
• 1995

Molybdenum disilicide (MoSi2) was synthesized from Mo, MoO3, Si and Al powders by self-propagating high temperature synthesis (SHS). The effect of processing parameters such as Mo/MoO3 molar ratio, Ar gas pressure in the reactor and pressing pressure of compacts in synthesis of MoSi2 were investigated. h-MoSi2 was transformed into t-MoSi2 with increasing the Mo/MoO3 mole ratio, and only t-MoSi2 phase was identified above 3.5 : 1 (molar ratio). The synthesized phases did not change with the variation of Ar gas pressure and pressing pressure of compacts. It was found that the combustion temperature was above 2,50$0^{\circ}C$. The products were separated into MoSi2 (s) and $\alpha$-Al2O3 by the difference of their specific grativities. Bending strength, hardness and density of sintered specimen exhibited 82 MPa, 5.368 GPa and 5.43 g/㎤, respectively.

• Journal of the Korean Ceramic Society
• /
• v.48 no.6
• /
• pp.559-564
• /
• 2011

In order to investigate the behavior of $SiO_2$ in the molybdenum silicide powders, crystal structure of these powders was measured by XRD, in addition, surface composition and surface phase (or chemical states) and microstructure were analysed by XPS and TEM, respectively. Mo-silicide powders containing $SiO_2$ were synthesized by SHS (Self-Propagating High-Temperature Synthesis) technique. In XRD result, according to increase of $SiO_2$ contents, the crystal structure for synthesized $MoSi_2$ powders was still typical $MoSi_2$ bct without any other phases. By XPS analysis, the surface of Mo and Si source powders was covered with $MoO_3$ and $SiO_2$, respectively, and the surface of synthesized $MoSi_2$ powder was also covered with $MoO_3$ and $SiO_2$, which were stable oxides at room temperature. However, according to increase of $SiO_2$ addition, $MoSi_2$ phase in XPS spectra decreased and $SiO_2$ phase increased relatively in synthesized $MoSi_2$ powders. From the results by XPS and XRD, we found that the existent $SiO_2$ has amorphous structure. In the microstructure, the small particulates of the synthesized products added $SiO_2$ agglomerated together to form larger clusters (from ~10 nm to ~1 ${\mu}m$). From TEM, XPS, and XRD results, we found that the out layer of agglomeration of synthesized $MoSi_2$ powder is surrounded by amorphous $SiO_2$.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1109-1113
• /
• 1999

sothemal reduction at $50^{\circ}C$ using $Pt/MoO_3$ or $Pt/MoO_3/SiO_2$ made by dry impregnation or physical mixture of $Pt^{\circ}$ and $MoO_3$ demonstrated that the $H_2$ uptake vis $H_2$ spillover from Pt into $MoO_3$ was enhanced as calcination temperature was increased. Surface area of exposed Pt crystallites measured by CO chemisorption was decreased with higher calcination temperature. In addition, TEM showed that $MoO_x$ overlayers were formed on Pt crystallites after calcination at $400^{\circ}C$. Consequentially, it was found that this increased active contact sites between Pt and $MoO_3$ due to surface morphological change was one of the dominant factors for this increased $H_2$uptake via $H_2$ spillover from Pt crystallites into $MoO_3$.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.263-266
• /
• 2000

This paper is focused on the fabrication of reliable Al/$TiO_2-SiO_2$/Mo antifuse, which could operate at low voltage along with the improvement in on/off state properties. Mo metal as the bottom electrode had smooth surface and high melting point, and was being kept as-deposited $SiO_2$film stable. The breakdown voltage of TiO_2-SiO_2$ stacked antifuse was better than that of same-thickness (100 $\AA$) $SiO_2$antifuse because of Ti diffusion in $SiO_2$. The improving breakdown-voltage and on-resistance can be obtained as well as the influence of hillock in the bottom metal is reduced by using double insulator. Low on-resistance (65 $\Omega$) and low programming voltage (9.0 V) can be obtained in these antifuses with 250 $\AA$ double insulator.

• Journal of the Korean Ceramic Society
• /
• v.25 no.3
• /
• pp.251-260
• /
• 1988

Ion-exchange porous glasses were prepared by heat treatment and subsequently hydro thermalor acid leaching treatment $10Li_2O$.$(90-x)B_2O_3$.$xSiO_2$ base glasses containing various amount of $Al_2O_3$ or $MoO_3$. It was investigated how the phase separation and the cation exchange capacity(CEC) were affected by the addition of $Al_2O_3$ or $MoO_3$. The optimum condition of phase separation in these glasses was about 48$0^{\circ}C$ for 10 hrs. The degree of phase separation was rapidly suppressed by the addition of $Al_2O_3$ up to 10 mol% and thereafter suppression effect was decreased. The maximum value of CEC, about 252meq/100g, was observed with the $1OLi_2O$.$45B_2O_3$.$45SiO_2＋7.5Al_2O_3$ porous glass prepared by hydrothermal treatment and its mean pore radius was about 16.3A. The addition of $MoO_3$ accelerated phase separation and leaching rate. Looking at the remakable increment of pore diameter and pore volume of these porous glasses by the addition of $MoO_3$, the effect of $MoO_3$ may be ascribed to the lowering of silica concentration in the borate phase and to the forming of water-soluble complex with silica during the leaching treatment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.1
• /
• pp.34-37
• /
• 2004

Effect of $H_2$ spillover rate as functon of calcination temperature on reaction kinetics was evaluated. Reaction kinetics including yield, conversion and selectivity of 1-butene isomerization over $Pt/HxMoO_3/SiO_2$ were measured as reaction temperature was increased. While conversion of 1-butane was decreased, yield of iso-butene was increased. Two kinds of reaction mechanism were proposed from the change of selectivity as function of temperature.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.10
• /
• pp.1082-1085
• /
• 1997

The Near-Edge X-ray Absorption Fine Structure (NEXAFS) technique and Differential Scanning Calorimetry (DSC) were utilized to investigate the reaction of CH4 and O2 on the MoO3/SiO2 catalyst. The NEXAFS results showed that the stoichiometry of the molybdenum oxide catalyst supported on silica was MoO3. MoO3 was reduced to MoO2 when the catalyst was exposed to CH4 at 773 K. NEXAFS results confirm that lattice oxygen is directly related to the process of CH4 oxidation which takes place on the surface of MoO3/SiO2 catalysts. DSC results show that the structure of MoO3 changes around 573 K and this structural change seems to improve the migration of oxygen in the lattice.