• Journal of Life Science
• /
• v.24 no.4
• /
• pp.403-410
• /
• 2014

This study was conducted in organic certification soil for the comparison of heavy metals, nutrients, and irrigated water standards to certify a farm. It was carried out in 811 paddy fields of organic rice (Oryza sativa L.) cultivated at Goseong-Gun. The amounts of 8 heavy metals, Cd, Cu, As, Hg, Pb, $Cr^{6+}$, Zn, and Ni were found to be 0.05, 14.5, 1.08, 0.92, 10.7, 1.34, 35.9, and 22.2 mg $kg^{-1}$ in regular sequence in the organic paddy soil, and they were 0.32, 13.6, 1.01, 0.03, 10.4, 0.91, 42.4 and 22.5 mg $kg^{-1}$ in the non-pesticide paddy soil. In comparing organic and non-pesticide paddy soil with respect to the chemical characteristics of the soil, the average pH and the amount of organic matter, available phosphate and available silicate were 5.88 and 27.6 g $kg^{-1}$, 134.5 mg $kg^{-1}$, and 165.3 mg $kg^{-1}$, while they were 5.78 and 32.1 g $kg^{-1}$, 107.7 mg $kg^{-1}$, and 175.2 mg $kg^{-1}$, respectively. The amount of exchangeable cation $K^+$, $Ca^{2+}$, and $Mn^{2+}$ were 0.25, 5.20, and 1.04 cmol+ $kg^{-1}$ in organic paddy soil, while they were 0.38, 5.13, and 1.19 cmol+ $kg^{-1}$ in non-pesticide paddy soil. The pH, DO, BOD, COD and SS conditions of the irrigated water used in the organic paddy soil were found to be 7.23, 8.40, 2.80, 1.86, and 2.58 mg $l^{-1}$ and the condition of irrigated water used in the non-pesticide paddy soil were found to be 7.65, 9.16, 2.25, 4.11, and 4.00 mg $l^{-1}$, respectively. Based on these findings, we suggest that environmentally-friendly certificates in Korea have to unify organic and non-pesticide agro-products in an organic standard in food policy and control because there is no difference between soil and irrigated water standards in the two certifications.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.5
• /
• pp.345-350
• /
• 2018

Nanomaterials have considerable potential to solve several key challenges in various electrochemical devices, such as fuel cells. However, the use of nanoparticles in high-temperature devices like solid-oxide fuel cells (SOFCs) is considered problematic because the nanostructured surface typically prepared by deposition techniques may easily coarsen and thus deactivate, especially when used in high-temperature redox conditions. Herein we report the synthesis of a self-regenerated Pd metal nanoparticle on the perovskite oxide anode surface for SOFCs that exhibit self-recovery from their degradation in redox cycle and $CH_4$ fuel running. Using Pd-doped perovskite, $La(Sr)Fe(Mn,Pd)O_3$, as an anode, fairly high maximum power densities of 0.5 and $0.2cm^{-2}$ were achieved at 1,073 K in $H_2$ and $CH_4$ respectively, despite using thick electrolyte support-type cell. Long-term stability was also examined in $CH_4$ and the redox cycle, when the anode is exposed to air. The cell with Pd-doped perovskite anode had high tolerance against re-oxidation and recovered the behavior of anodic performance from catalytic degradation. This recovery of power density can be explained by the surface segregation of Pd nanoparticles, which are self-recovered via re-oxidation and reduction. In addition, self-recovery of the anode by oxidation treatment was confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM).

• Journal of Soil and Groundwater Environment
• /
• v.20 no.4
• /
• pp.66-72
• /
• 2015

The aim of this study was to enhance of the Discfilter process (maximum treatment capacity - 500 ton/day) removal efficiency for small-scale wastewater reclamation under various influent wastewater conditions (with / without coagulation process, coagulant content and temperature). The result of chemical resistance test for fiber filter in the Discfilter that weight loss was obtained with 0.535% under pH 3, 0.092% under pH 9 and 0.028% under 10% NaClO. The removal efficiency test of Discfilter process on the with / without coagulation process showed that with coagulation process condition was occurred COD_Mn of 42.26 ± 0.61, BOD₅ of 88.72 ± 0.44, T-P of 84.67 ± 0.72 and SS of 90.58 ± 0.61. The removal efficiency of Discfilter process on the coagulant content (4.5, 5.0 and 5.0 mL/min) and temperature (< 10℃, 10℃~ 20℃ and > 20℃) conditions were increased as coagulant content and temperature increased. This study demonstrated the potential application of Discfilter process for small-scale wastewater reclamation.

• Journal of Nutrition and Health
• /
• v.35 no.3
• /
• pp.291-295
• /
• 2002

This study was designed to investigate the effects of a butanol (BuOH) fraction from an extract of pine (Pinus densiflora Sieb et Zucc.) needles, on oxygen radicals and their scavenger enzymes in the liver membranes of rats. Twenty-eight male Sprague-Dawley (SD) rats were divided into four groups over a 45 days study period: the control group on a basic diet, and three experimental groups on three different dietary levels of the butanol fraction, specifically 25 mg (BuOH-25), 50 mg (BuOH-50), and 100 mg (BuOH-100) butanol fraction/kg body weight/day, thereby 0.025%, 0.05%, 0.1% of butanol extract of pine needles was added to basil diet respectively. At the end of the experimental period, body weights and food intakes were not different among the four groups. The results showed that cholesterol accumulation in the mitochondria and microsomes of liver cells was significantly inhibited in the BuOH-50 and BuOH-100 groups: by 11.6% and 20.1% in the mitochondria of the BuOH-50 and BuOH-100 groups, respectively; and by 10.5%, and 13.5% in the microsomes of the BuOH-50 and BuOH-100 groups, respectively, compared with the control group. The levels of hydroxyl radicals (.OH) were significantly) lower in the liver mitochondria of the BuOH-50 and BuOH-100 groups (by 13.3% and 18.5%, respectively), while OH radicals were significantly lower in the microsomes or all three experimental groups (by 15.7% in the BuOH-25 group, 20.0% in the BuOH-50 group, and 20.6% in the BuOH-100group), compared with the control group. Superoxide radical (O$_2$) formation was also significantly inhibited in the liver cytosol of both BuOH-50 and BuOH-100 groups; the levels of these radicals were 8.0% lower for the BuOH-50 group and 11.1% lower for the BuOH-100 group, compared to the control group. Copper/Zinc - superoxide dismutase (Cu/Zn-SOD) activities were significantly increased (by 10.3% and 15.9%, respectively) in the liver cytosols of the BuOH-50 and BuOH-100 groups, but Mn-SOD activities were almost identical in the three RuOH groups, compared with the control group. Glutathione peroxidase (GPx) activities were significantly increased in the three experimental groups (by 9.0% in the BuOH-25 group, 19.4% in the BuOH-50 group, and by 25.6% in the BuOH-100 group), compared with the control group. These results suggest that the butanol extract of pine needles may play an effective role in attenuating oxygen radicals and activating scavenger enzymes; consequently, aging may be very effectively modulated and/or inhibited.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.59-64
• /
• 2006

Ion exchange resin particles should not be found in steam generator(S/G) sludge. The suspicious spherical resin particles observed in S/G sludge sample were characterized for particle size distribution under optical microscope using the micro-technique, for element analysis by the electron probe micro analysis (EPMA), and for molecular identification by the IR spectroscopy. The particle sizes are distributed from 1 to $200{\mu}m$ for the sludge, while 40 to $500{\mu}m$ for the spherical resin particles. The results of the elemental analysis showed different major impurities: Si, Al, Mn, Cr, Ni, Zn and Ti for the sludge particles, while Si, Cu, Zn for the spherical resin particles. However, both particles contain Fe as a matrix of magnetite $(Fe_3O_4)$. IR spectrum of the spherical particles was not quite similar to the IR spectrum of ion exchange resins used in S/G system. These results indicate that the spherical particles are not related to ion exchange resin particles and may be formed by the process of the sludge formation.

• Journal of Periodontal and Implant Science
• /
• v.34 no.4
• /
• pp.819-836
• /
• 2004

Nowdays, the awareness of implant treatment has grown rapidly among dentists and patients alike in Korea, as it becomes a widely accepted treatment. The reason is that unlike crown and bridge or denture treatment, implant treatment helps preserve existing bone and improve masticatory functions. So, It is needed understanding about the type, distribution of implant patient. The following results on patient type and implant distribution were compiled from 4433 implant cases of 1596 patients treated at the periodontal dept. of Y University Hospital during 1992 to 2004. 1. There are no dissimilarities between men and women, with patients in their 40, 50s accounting for 52.5% of patients and 57.5% of implant treatments; the largest share of patients and implant treatments. 2. Mn. posterior area accounted for 54.9% of implant treatments followed by Mx. posterior area(27.6%), Mx anterior area(11.9%) and Mn anterior area(5.6%). 3. Partial edentulous patients treated by single crown and bridge-type prosthesis accounted for 97.5% and fully edentulous patient accounted for the remaining 2.5%. 4. The major cause of tooth loss is periodontal disease, followed by dental caries, trauma and congenital missing. Also, older people are more likely to suffer from tooth loss due to periodontal disease rather than dental caries. 5. In the distribution of bone quality for maxillae, type III was most, followed by type II, r type IV and r type I. As for mandible, type II was most, followed by type III, type IV and for type I. 6. In the distribution of bone quantity for maxillae, type C was most, followed by type B, type D, type A, and for type E. As for mandible, type B was 52% most, followed by type C, type D, type A and type E. 7. The majority of implants were those of 1O-14mm in length (85.2%) and regular diameter in width (64%). The results provided us with basic data on patient type, implant distribution, bone condition, etc. We wish that our results coupled with other research data helps assist in the further study for better implant success/survival rates, etc.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.65-69
• /
• 1998

In order to evaluate the utility of bituminous coal fly ash, gypsum, oyster shell as soil amendments, aadic clayloam paddy soils with low calaum content were amended in the upper 15㎝ with amendments, and then Chinese cabbage was cultivated under plastic film house. Amendments treated were, in metric tons per hectare, i) none(Check) ; ii) 80 fly ash(FA) ; iii) 4 shell(SH) ; iv) 56 fly ash+24 gypsum (FG) ; v) 40 fly ash+24 gypsum+0.8 shell(FGS). On the whole, soil chemical properties were improved by amendments treatments. Amongst treatments, FA prominently neutralized soil pH and increased contents of Av. $P_2O_5$, Ex. K, and Av. B in soils. Besides, it showed the highest ratio in bacteria/fungi and (bacteria+actinomycetes)/fungi. FGS also affected the neutralization of soil pH and the increment of Ex. Mg. Amendments plants appeared alkaline damages only at early growing stage, but showed positive responses in fresh weight yields : 23% for FGS : 21% for FG : 19 18% for SH. At harvesting, leaves both of FA and FGS plants had higher values in contents of N, P, K, Ca, Mg, Fe, Mn, Zn, B, reduang-sugar, and vitamin-C than of others. In especial, Check plants appeared the heart rot symptoms owing to calaum defiaency differently from amendments plants. Taken together, FGS was an effective combination enable to maximize the utility of fly ash, gypsum, shell as soil amendments, espeaally in cabbage yield and quality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.3
• /
• pp.276-285
• /
• 1986

This study was undertaken to investigate the characteristics of the proteolytic enzyme extracted from Neungee mushroom [Sarcodon aspratus (Berk.) S. Ito]. The enzyme was purified by using Tris-acryl CM-cellulose ion exchange, gel filtration on Ultrogel AcA 54, Hydroxy apatite column chromatography and preparative isoelectic focusing. The specific activity of the purified enzyme increased 8 times as compared with that of the crude enzyme. The enzyme was homogeneous on polyacrylamide gel electrophoresis (PAGE). The optimum pH was 10.1, indicating the enzyme to be alkaline protease and the optimum temperature was $57^{\circ}C$. The enzyme was stable at temperatures lower than $50^{\circ}C$and at pH values ranging from 4.0 to 10.8. However, the enzyme activity decreased by 26 and 65% at 60 and $65^{\circ}C$, respectively, when incubated for 30 minutes. The enzyme activity was activated by $Mn^{++}$ and inhibited by $Cu^{++}$ and $Hg^{++}$. The enzyme was consisted of monomer and its molecular weight estimated to be about 30,100 when determined by sodium dodecyl sulfate PAGE. Isoelectric point of the enzyme was determined to be 9.80.

• Journal of Welding and Joining
• /
• v.13 no.3
• /
• pp.134-146
• /
• 1995

Aluminium nitride(AlN) is currently under investigation as potential candidate for replacing alumium oxide(Al$_{2}$ $O_{3}$) as a substrate material for for electronic circuit packaging. Brazing of aluminium nitride(AlN) to Cu with Ag base active alloy containing Ti has been investigated in vacuum. Binary Ag$_{98}$ $Ti_{2}$(AT) and ternary At-1wt.%Al(ATA), AT-1wt.%Ni(ATN), AT-1wt.% Mn(ATM) alloys showed good wettability to AlN and led to the development of strong bond between brate alloy and AlN ceramic. The reaction between AlN and the melted brazing alloys resulted in the formation of continuous TiN layers at the AlN side iterface. This reaction layer was found to increase by increase by increasing brazing time and temperature for all filler metals. The bond strength, measured by 4-point bend test, was increased with bonding temperature and showed maximum value and then decreased with temperature. It might be concluded that optimum thickness of the reaction layer was existed for maximum bond strength. The joint brazed at 900.deg.C for 1800sec using binary AT alloy fractured at the maximum load of 35kgf which is the highest value measured in this work. The failure of this joint was initiated at the interface between AlN and TiN layer and then proceeded alternately through the interior of the reaction layer and AlN ceramic itself.

• Korean journal of food and cookery science
• /
• v.16 no.5
• /
• pp.425-430
• /
• 2000

This study was carried out to estimate mineral contents of some underground vegetables including potatoes, sweet-potatoes, carrots, radishes, onions, and garlics produced in Korea using ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectrometry). According to the measurements, the contents of Na, Mg, Al, K, Ca, Mn, Fe, Zn, and P in Korean underground vegetables were variable depending upon producing areas and individual plants. Compared with other underground vegetables, the contents of Na in carrots and lotus roots were quite high. The contents of Cd, Ag Co. and Sr appeared to be below hazard levels. It is expected that this study can be used to calculate the mineral intake from underground vegetables.