• Korean Journal of Materials Research
• /
• v.16 no.6
• /
• pp.394-399
• /
• 2006

Ferroelectric $HoMnO_3$ thin films were deposited on the Si(100) substrate at $700^{\circ}C$ for 2 hrs by metalorganic chemical vapor deposition (MOCVD) and post-annealed at 850oC by rapid thermal process (RTP). Electrical properties and crystalline phases of $HoMnO_3$ thin films were investigated as a function of postannealing time. Single phase of hexagonal symmetry with c-axis preferred orientation was obtained from $HoMnO_3$ thin films post-annealed at $850^{\circ}C$ for 5 min, while the c-axis preferred orientation was decreased with the increase of post-annealing time, and the thin films post-annealed at $850^{\circ}C$ for 15 min showed the mixture phases of hexagonal and orthorhombic symmetry. P-E (Polarization-Electric field) hysteresis loop of ferroelectric $HoMnO_3$ thin films was observed only for the single phase of hexagonal symmetry, but that was not observed for the mixture phases of the hexagonal and orthorhombic symmetry, which was discussed with the bond valence of Mn ion of crystalline phase. Leakage current density was dependent on the microstructure of thin films as well as the change of valence of Mn ion.

• BMB Reports
• /
• v.35 no.3
• /
• pp.330-336
• /
• 2002

The lgtB genes that encode $\beta$-1,4-galactosyltransferases from Neisseria meningitidis ATCC 13102 and gonorrhoeae ATCC 31151 were isolated by a polymerase chain reaction using the pfu DNA polymerase. They were expressed under the control of lac and T7 promoters in Escherichia coli M15 and BL21 (DE3). Although the genes were efficiently expressed in E. coli M15 at $37^{\circ}C$ (33 kDa), most of the $\beta$-1,4-galactosyltransferases that were produced were insoluble and proteolysed into enzymatically inactive polypeptides that lacked C-terminal residues (29.5 kDa and 28 kDa) during the purification steps. When the temperature of the cell growth was lowered to $25^{\circ}C$, however, the solubility of the $\beta$-1,4-galactosyltransferases increased substantially. A stable N-terminal his-tagged recombinant enzyme preparation could be achieved with E. coli BL21 (DE3) that expressed lgtB. Therefore, the cloned $\beta$-1,4-galactosyltransferases were expressed under the control of the T7 promoter in E. coli BL21 (DE3), mostly to the soluble form at $25^{\circ}C$. The proteins were easily purified to homogeneity by column chromatography using Ni-NTA resin, and were found to be active. The galactosyltransferases exhibited pH optimum at 6.5-7.0, and had an essential requirement for the $Mn^{+2}$ ions for its action. The $Mg^{+2}$ and $Ca{+2}$ ions showed about half of the galactosyltransferase activities with the $Mn^{+2}$ ion. In the presence of the $Fe^{+2}$ ion, partial activation was observed with the $\beta$-1,4-galactosyltransferase from N. meningitidis(64% of the enzyme activity with the $Mn^{+2}$$Ni^{+2}$, $Zn^{+2}$, and $Cu^{+2}$ ions could not activate the $\beta$-1,4-galactosyltransferase activity. The inhibited enzyme activity with the $Ni^{+2}$ ion was partially recovered with the $Mn^{+2}$$Fe^{+2}$, $Zn^{+2}$, and $Cu^{+2}$ ions, the $Mn^{+2}$$\beta$-1,4-galactosyltransferase activity was 1.5-fold stimulated with the non-ionic detergent Triton X-100 (0.1-5%).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.9
• /
• pp.960-966
• /
• 2004

On the bases of the results from "Additive Coating of BaTiO$_3$ Powder using Sol Coating Method I", experimental condition was defined. Representative additives for BaTiO$_3$, that is to say, Mg, Ca and Mn were experimented. The sources of the metal ion were used by organometal complex. As added it, the stability of BaTiO$_3$ sol was evaluated. Mg and Ca were stable, however, The solubility limit of Mn-ATH was 0.05 mol ratio in Mn-ATH/sol. The solubility limit of Mg ion in BaTiO$_3$ was lower than 2 mol%. From the x Ray diffraction patterns, lattice parameters were different with temperature and additives, because the solubility of metal ion was varied in BaTiO$_3$. The dielectric constant of BaTiO$_3$ powders which coated with the 1.5 mol% Mg and calcined at 1200$^{\circ}C$ was increased with 20%.

• The Korean Journal of Mycology
• /
• v.21 no.1
• /
• pp.23-27
• /
• 1993

Ion effects on $11{\alpha}-hydroxylation$ of progesterone and $5{\alpha}-reduction\;of\;11{\alpha}-hydroxyprogesterone$ by Rhizopus nigricans were investigated. Metal ions such as $Cu^{2+},\;Cd^{2+},\;Co^{2+},\;Mn^{2+},\;Zn^{2+},\;Fe^{2+},\;Mg^{2+},\;Fe^{3+}\;and\;Na^+$ reduced the $11{\alpha}-hydroxylation$ activity, while $K^+$ stimulated the same reaction. Enzyme activity for the $5{\alpha}-reduction$ of $11{\alpha}-hydroxyprogesterone$ was increased in the presence of $Fe^{2+},\;Mn^{2+},\;Mg^{2+},\;Co^{2+},\;Zn^{2+},\;Fe^{3+},\;K^+\;and\;Na^+$, whereas it was decreased in the presence of $Cd^{2+}\;and\;Cu^{2+}$. Potassium ion of $10^{-3}\;M\;$ of concentration was found to be effective for the promotion of $11{\alpha}-hydroxylation$. On the other hand, cadmium ion of $10^{-4}\;M$ was proved to suppress the $5{\alpha}-reduction$ reaction. Progesterone is reported to be transformed into $11{\alpha}-hydroxyprogesterone$ which, in turn, is converted further into $11{\alpha}-hydroxy-allopregnane-3$, 20-dione by R. nigricans. From this point of view, the highest yield of $11{\alpha}-hydroxyprogesterone$ could be obtained when potassium ion of $10^{-3}\;M$ was given initially followed by addition of cadmium ion of $10^{-4}\;M$ to limit conversion of 11{\alpha}-hydroxyprogesterone into $11{\alpha}-hydroxy-allopregnane-\;3$, 20-dione.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.114-114
• /
• 2010

In this study, structural properties and photoluminescent characteristics of thin film rhombohedral zinc orthosilicate doped with manganese ($Zn_2SiO_4:Mn$) were investigated. The $Zn_2SiO_4:Mn$ films showed a pronounced absorption edge in the near ultraviolet wavelength region and a high optical transparency in the visible spectral range. The maximum transmittance reached 0.922 at 597 nm, which was very close to the transmittance of the fused quartz substrate alone (0.935). The $Zn_2SiO_4:Mn$ films were composed of rhombohedral polycrystalline grains with random crystallographic orientation. The broad-band photoluminescence emission peaked at around 525 nm was observed from the $Zn_2SiO_4:Mn$ films, which was ascribed to the radiative relaxation from the $^4T_1$ lowest excitation state to $^6A_1$ ground state of 3d5 electrons in divalent manganese ion. The excitation band exhibited a peak maximum at 259 nm in the near ultraviolet region, which was considered to be associated with the charge transfer transition of divalent Mn ion in the $Zn_2SiO_4$ system.

• Journal of the Korean Ceramic Society
• /
• v.34 no.6
• /
• pp.583-590
• /
• 1997

The effects of Mn2O3 and Y2O3 additives on the microstructure and dielectric properties of Sr(Zr, Ti)O3 have been investigated. Powders with Sr(Zr1-xTix)O3(0$\leq$x$\leq$0.1) composition were prepared by the conventional solid state processing from commercial TiO2 and precipitation-processed ZrO2. The powders containing sintering additives of Mn2O3 and Y2O3 were compacted and then sintered at 1,55$0^{\circ}C$ for 4 h to get>97% relative density. Mn2O3 suppressed the grain growth and Y2O3 enhanced the density of sintered body. The oxidation state of Mn ions were determined by a chemical wet method and EPR spectroscopy. Mn ions were present as Mn2+ and Mn4+ in SrZrO3, while as Mn3+ and Mn4+ in Ti-substituted Sr(Zr, Ti)O3. With the substitution of Ti, the lattice parameters of SrZrO3 decreased and its dielectric constant increased with remarkable decrease in Q value. The dielectric constant of Sr(Zr, Ti)O3 was in the range of 30 to 40, Q values 1,200~5,400 at 6 GHz and temperature coefficient of resonant frequency -67~100 ppm/K.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.4
• /
• pp.316-322
• /
• 2001

Cathode materials $LiMn_{2-y}$$M_{y}$ $O_4$(M=Zn and Mg) were obtained by reacting the mixture of LiOH.$H_2O$, Mn $O_2$ and MgO ar ZnO at 80$0^{\circ}C$ for 36h in an air atmosphere. These materials showed an extended cycle life in lithium-anode cells working at room temperatue in a 3.0 to 4.3V potential window. Among these materials, LiM $n_{1.9}$M $g_{0.1}$ $O_4$ showed the best cycle performance in terms of the capacity and cycle life. The discharge capacities of the cathode for the Li/LiM $n_{1.9}$ $M_{0.1}$ $O_4$ cell at the 1st cycle and at the 70th cycle were about 120 and 105mAh/g, respectively. This cell capacity is retained by 88% after 70th cycle. In cyclic voltammetry measurement, all cells revealed tow oxidation peaks and reduction peaks. However, Li/$LiMn_{2-y}$$M_{y}$ $O_4$ cell substituted with Zn and Mg showed new reaction peak during reduction reaction.eaction.ion.ion.

• The Korean Journal of Zoology
• /
• v.23 no.3
• /
• pp.137-148
• /
• 1980

The effects of divalent cations, $Hg^{2+}, Cu^{2+}, Pb^{2+}, Cd^{2+}$, and $Mn^{2+}$ on the total ATPase activity of the fragmented sarcoplasmic reticulum isolated from rabbit skeletal muscle were investigated. The inhibitory effects of the cations on the enzyme activity increased as the concentrations of the ions increased with the order of efficiency of $Hg^{2+}$ > $Cu^{2+}$ > $Pb^{2+}$ > $Cd^{2+}$ > $Mn^{2+}$ in the concentration range between 10 and 500$\mu$M. The 50% inhibition for each ion was almost identical with the inhibition constant (Ki) value for each ion. The Ki's were 10, 30 130, and 350$\mu$M for $Hg^{2+}, Cu^{2+}, Pb^{2+}, and Cd^{2+}$, respectively. $Mn^{2+}$ seemed to be an activator at lower concentrations and an inhibitor at higher concentrations. The presence of the cations did not change the Km values, suggesting that the ions act as a reversible noncompetitive inhibitor on the FSR ATPase. The energy of activation of the enzyme was aproximately 19 Kcal/mole. The presence of the ions decreased the value slightly. A possible mechanism for the reversible noncompetitive inhibitory effect of the cations was discussed.

• Journal of Electrochemical Science and Technology
• /
• v.5 no.1
• /
• pp.32-36
• /
• 2014

The $0.3Li_2MnO_3{\cdot}0.7LiMn_{0.55}Ni_{0.30}Co_{0.15}O_2$ cathode material was prepared via a co-precipitation method. The vapor grown carbon fiber (VGCF) was used as a conductive material and its effects on electrochemical properties of the $0.3Li_2MnO_3{\cdot}0.7LiMn_{0.55}Ni_{0.30}Co_{0.15}O_2$ cathode material were investigated. From the XRD pattern, the typical complex layered structure was confirmed and a solid solution between $Li_2MnO_3$ and $LiMO_2$ (M = Ni, Co and Mn) was formed without any secondary phases. The VGCF was properly distributed between cathode materials and conductive sources by a FE-SEM. In voltage profiles, the electrode with VGCF showed higher discharge capacity than the pristine electrode. At a 5C rate, 146 mAh/g was obtained compared with 232 mAh/g at initial discharge in the electrode with VGCF. Furthermore, the impedance of the electrode with VGCF did not changed much around $9-10{\Omega}$ while the pristine electrode increased from 21.5${\Omega}$ to $46.3{\Omega}$ after the $30^{th}$ charge/discharge cycling.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.2
• /
• pp.51-56
• /
• 2005

We prepared orthorhombic $LiMnO_2$ by emulsion drying method. The thermo-gravimetric measurement and X-ray diffraction studies indicated that the orthorhombic $LiMnO_2$ phase was formed above $800^{\circ}C$ by oxygen evaporation process from $LiMn_2O_4$ and $Li_2MnO_3$. In this process, we could control the ordering of $LiMnO_2$ with heating rate. It was observed that electrochemical properties depended on the ordering of this material; the ordered one exhibited good capacity retention, whereas the disordered one suffered capacity fading upon cycling, especially in the 3 V region. Transmission electron microscopic (TEM) study showed that this difference is related with difference in the stress relieving effects in the samples.