• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.300-301
• /
• 2007

$Mg_4(Nb_{2-x}V_x)O_9$ (MNV) ceramics have been prepared by a hydrothermal method. Low-temperature sintering of $Mg_4(Nb_{2-x}V_x)O_9$ (MNV) by V substitution for Nb was discussed in this study. A $Q{\cdot}f_0$ value of 103,297 GHz with a ${\varepsilon}_r$ of 12.56 and a ${\tau}_f$ of $-10.53\;ppm/^{\circ}C$ was obtained when x=0.0625 after sintering at $1100^{\circ}C$ for 5 h.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.1
• /
• pp.58-63
• /
• 2010

Mg and Ma-based alloys are promising hydrogen storage materials for renewable clean energy applications. It has high hydrogen storage capacity (7.6wt.%), lightweight and low economical materials. However, commercial applications of the Mg hydride are currently hindered by its high operating temperature, and very slow reaction kinetics. In this work, we are aimed at studying the hydrogenation properties of the $MgH_x-V_2O_5$ composite prepared by hydrogen induced mechanical alloying. The absorption capacity of the sample is found to be about 4.7wt.% at 623K under 3 MPa $H_2$ pressure. The absorption characteristics observed have been compared with prepared $MgH_x$.

• Journal of the Korean Ceramic Society
• /
• v.48 no.4
• /
• pp.303-306
• /
• 2011

[ $V_2O_5$ ]doped Karrooite pigments were synthesized by the solid state method to get stabilized brown pigment in oxidation and reduction atmosphere. Optimum substitution condition and limited dopant with $V_2O_5$ for Karrooite pigment was investigated. With calcination at $1250^{\circ}C{\sim}1400^{\circ}C$, compositions were designed varying $V_2O_5$ molar ratio by increasing 0.02mole to the formula $Mg_1-xTi_2-xM_{2x}O_5$(x = 0.01~0.09 mole). Synthesized pigments were analyzed by XRD, Raman spectroscopy and UV-vis. When $V_2O_5$ was doped from 0.01 to 0.05 mole, single phase of Karrooite was observed at temperature $1300^{\circ}C$ and soaking time 4h by Raman spectroscopy. However, it was found that excess $VO_2$ peak appeared with 0.07 and 0.09 mole of $V_2O_5$ doped to $MgTi_2O_5$. This result indicated that the maximum limit of solid solution is 0.05 mole $V_2O_5$. Karrooite pigments were applied as a ceramic pigment to achieve brown colors in lime magnesia glaze and lime barium graze at both of oxidation and reduction atmosphere. CIE color coordinates are $L^*$ = 40.34, $a^*$ = 9.94, $b^*$ = 21.40 in lime magnesia glaze.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.3
• /
• pp.120-123
• /
• 2005

The 5 mol% ZnO doped $LiNbO_3$ film and the 2 mol% MgO doped $LiNbO_3$ film were grown on the $LiNbO_3$ (001) substrate by liquid phase epitaxy (LPE) method with $Li_2CO_3-V_2O_5$ flux system. The crytsallinity and the lattice mismatch between $Zn:LiNbO_3$, film and $Mg:LiNbO_3$, film were analyzed by x-ray rocking curve (XRC). In addition, the ZnO and MgO distribution in the cross-section of the multilayer thin films was observed using electron probe micro analyzer (EPMA).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.198-206
• /
• 2001

The structure of Yb complex with 3-nitro-1,2,4-triazol-5-one(NTO), $[Yb(NTO)3(H2O)4].5H2O$ has been investigated by X-ray diffraction method. Crystallographic data for the title compound : monoclinic, C2/c, $a=36.925(2){\AA},$ b=6.6770(4)${\AA},$ c=25.6376(15)${\AA},$ {\beta}=130.978(1)^{\circ},$ V=4772.0(5)${\AA}^3,$ Z=8, $D_c,=1.952\; Mg/m^3.$ The intensity data were collected on a Broker SMART diffractometer equipped with a CCD area detector using Mo $K\alpha$ radiation. The structure was solved by direct method and refined by full-matrix least-squares calculations to a final R value of 0.0424 for 4727 independent reflections and 335 parameters. The three carbonyls of three NTO anions and four ligand water molecules which are formed the pentagonal bipyramid are coordinated with $Yb^{3+}$ and also five water molecules are included in the form of the crystal water in the molecular structure.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.2000-2010
• /
• 2021

Mechanical moduli, such as Young's modulus (E), Bulks modulus (B), Shear modulus (S), longitudinal modulus (L), Poisson's ratio (σ) and micro Hardness (H) were theoretically calculated for (100-x)TeO₂+x MgO glasses, where x = 10, 20, 30, 40 and 45 mol%, based on the Makishima-Mackenzie model. The estimated results showed that the mechanical moduli and the microhardness of the glasses were improved with the increase of the MgO contents in the TM glasses, while Poisson's ratio decreased with the increase in MgO content. Moreover, the radiation shielding capacity was evaluated for the studied TM glasses. Thus, the linear attenuation coefficient (LAC), mass attenuation coefficient (MAC), transmission factor (TF) and half-value thickness (𝚫_0.5) were simulated for gamma photon energies between 0.344 and 1.406 MeV. The simulated results showed that glass TM10 with 10 mol % MgO possess the highest LAC and varied in the range between 0.259 and 0.711 cm^-1, while TM45 glass with 45 mol % MgO possess the lowest LAC and vary in the range between 0.223 and 0.587 cm^-1 at gamma photon energies between 0.344 and 1.406 MeV. Furthermore, the BXCOM program was applied to calculate the effective atomic number (Z_eff), equivalent atomic number (Z_eq) and buildup factors (EBF and EABF) of the glasses. The effective removal cross-section for the fast neutrons (ERCSFN, ∑_R) was also calculated theoretically. The received data depicts that the lowest ∑_R was achieved for TM10 glasses, where ∑_R = 0.0193 cm² g^-1, while TM45 possesses the highest ERCSFN where ∑_R = 0.0215 cm² g^-1.

• Journal of radiological science and technology
• /
• v.20 no.1
• /
• pp.65-69
• /
• 1997

[ $Mg_2SiO_4(La.Ho)$ ] thermoluminescent phosphor was made by putting the $MgCl_2.6H_2O$ and $SiO_2$ and by doping the rare earth element of $LaCl_3.7H_2O$ and $HoCl_3$. The heating rate is $10^{\circ}C/sec$ for the thermoluminescent phosphor. Two peaks are found in the measured $Mg_2SiO_4(La.Ho)$ Tl glow curve at $152^{\circ}C$ and $205^{\circ}C$ when the heating rate is $5^{\circ}C/sec$. The peak value at $205^{\circ}C$ is the most sensitive to X-ray among the glow peaks. The activation energy of the main peak has been estimated by the peak shape method. The estimated activation energies for Ho and La are $0.52{\sim}1.77\;eV$ respectively.

• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.379-387
• /
• 2007

This research was conducted to evaluate the influence of pre-planting fertilizer levels (PFL) and initiation time of fertigation (ITF) on growth and nutrient contents of tomato plug seedlings. The pre-planting fertilizer levels in a coir+peatmoss+perlite (4:4:2, v/v/v) substrate were adjusted to 0.5X, 1.0X and 1.0X, and initiation time of fertigation was set to 7, 14,21 and 28 days after sowing. Elevated PFL in same ITF increased plant growth such as fresh and dry weights at 35 and 70 days after sowing. Plugs with early feeding among treatments of equal amount of PFL also showed better growth as compared to those of later feeding. In each ITF, 0.5X treatment had the higher tissue $P_2O_5$ contents than 1.0X and 1.5X treatments. Elevated PFL resulted in the decrease of tissue K, Mg and Fe contents and increase of tissue Ca contents. The pH in soil solution of all root substrates except 0.5X treatment at 35 and 70 days after sowing were greater than 7.0, which is too high. This suggests that the amounts and kinds of Ca containing fertilizers should be altered to decrease the pH. The results of this research indicated that fertilizer levels should be increased to 1.5X except Ca fertilizer, and fertigation immediately after moving plug trays from germination room to greenhouse is required to increase crop growth and decrease cropping time.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.3
• /
• pp.157-162
• /
• 2006

Objective of this research was to evaluate optimal conditions of arsenic adsorption in water by zero-valent iron (ZVI). Batch experiment showed that adsorption of arsenic by ZVI followed a Langmuir isotherm model. The masses of As(V) adsorbed onto ZVI were increased as decreasing pH of the reacting solution (pH 3: 2.05, pH 5: 1.82, pH 7: 1.24, pH 9: 1.03 mg As/g $Fe^0$) and as increasing the temperature ($15^{\circ}C$ : 1.59, $25^{\circ}C$ : 1.81, 35 : $1.93^{\circ}C$ mg As/g $Fe^0$). The SEM and EDS (energy dispersive X-ray spectrometer) analysis of morphology and structure of ZVI before and after reacting with arsenic in water revealed that a relatively smooth and large surface of ZVI was transformed into a coarse and small surface particle after the reaction. The EDS spectra on the chemical composition of ZVI demonstrated that arsenic was incorporated into ZVI by adsorption mechanism. The XRD analysis also identified that the only peak for $Fe^0$ in the ZVI before the reaction and confirmed that $Fe^0$ was transformed into $Fe_2O_3$ and FeOOH, and As into $FeAsO_4{\cdot}2H_2O$.

• The Korean Journal of Ecology
• /
• v.13 no.4
• /
• pp.297-309
• /
• 1990

The distribution of aquatic macrophytes in TanChon basin, a stream of the Han River, were investigated in terms of environmental gradient from June 1989 to March 1990. In the basin, 12 species of aquatic macrophytes were listed and four communities of Potamogeton crispus community. $P. octandrus$ community, $Hydrilla verticillata$ community and $Vallisneria$ asiatica community were recongized by character species. $P. crispus, P. octandrus$ and $V. asiatica$ were found in rapids while $H. verticillata , Ceratophyllum demersum$ and $Trapa japonica$ were done in pools. The depth of sediment $TanCh\u{o}n$ was showed as a exponential function of water velocity, Bd=exp (-K Wv). The values of Biochemical Oxygen Demand(BOD), Chemical Oxygen Demand(COD) and Suspendid Solid(SS) were recorded as range of 3.2~121.0mg/1, 4.2~54.5mg/1 and 4.1~114.0mg/1, respectively. And the linear positive correlation between BOD(X) and COD(Y) were expressed as Y=3.904+0.4308 X with $R^2$=0.9808 and also the correlation between BOD value(X) and SS value(Y) were done as Y=5.333+0.9606X with $R^2$=0.9700. In two dimensional analysis of BOD and water velocity, their clusters were showed similar types matching to communities classified by character species. However, no aquatic macrophyes were found at the site with BOD$\geq$50mg/l or DO$\leq$0.2mg/l.