• Microbiology and Biotechnology Letters
• /
• v.25 no.4
• /
• pp.346-353
• /
• 1997

During the screening of cellulase producing microorganisms, a fungal strain C-4 was selected from etiolated leaves. Based on taxonomic studies, the fungus could be classified as a strain of Trichoderma sp. When the strain C-4 was cultured in Mandels' media at 28$circ$C for 6 days, the enzyme activities detected in broth were as follows: 8.2 U/ml (28.1 U/mg) of CMCase activity, 0.75 U/ml (2.58 U/mg) of Avicelase activity, 1.67 U/ ml (5.68 U/mg) of $eta$-glucosidase activity. The optimum pH for enzyme induction was 6.2. The crude enzyme retained 100% of its original CMCase activity at 50$circ$C for 1 hr (pH 5.0), and at 4$circ$C for 24 hrs (pH 5.0). There was no effect on the CMCase activity in the presence of 1 mM of CsCl, LiCl, MgCl$_{2}$, and FeCl$_{2}$, respectively. When the crude enzyme was treated with trypsin and chymotrypsin (2% W/w) for 10 minutes, the remaining CMCase activity was 70%, but there was no further loss of activity for 60 minutes treatment at 30$circ$C. The crude enzyme showed the synergism with rumen fluid for the hydrolysis of Avicel and CMC by 118% and 130%, respectively.

• Journal of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.231-235
• /
• 1987

In 10M chloride (4M HCl + 6M LiCl) solution, cobalt, but not nickel, formed complex anion (${CoCl_3}^-$), and this anion was extracted by a liquid anion exchanger with Amberlite LA-2. The ion exchange capacity was 2.175meq of cobalt complex per unit ml of Amberlite LA-2. Upon eluting the resin with 0.4M nitric acid, the cobalt complex was stripped and transfered into eluate quantitatively. By using this separation method in the chloride solution dissolved with 50mg of cobalt (II) and 500mg of nikel(II), recovery of cobalt were 99.6 percent.

• Particle and aerosol research
• /
• v.11 no.4
• /
• pp.107-113
• /
• 2015

SBA-16 (Santa Barbara Amorphous) was synthesized over supported $TiCl_4/MgCl_2$. Due to its high surface area and excellent morphological performance, it was expected to form the bi-supported catalytic system and be used for ethylene polymerization. Polymerization of ethylene was carried out at atmospheric pressure using hexane as solvent and triethylaluminium as cocatalyst. ICP, FTIR, DSC, TG-DTA were used to characterize polyethylene and catalyst product. Optimum conditions for ethylene polymerization were found to be 100 mL hexane, Al/Ti molar ratio of 160 and 1 h polymerization at $60^{\circ}C$. The activity of 396.76 kg PE/mol Ti.h.atm was achieved. Melting point of the obtained polymer was in the range of $132-135^{\circ}C$ and the highest degree of crystallization was 46%.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1550-1552
• /
• 1994

In order to investigate the effect of electrolyte solutions on the activities of bow-tie water trees in XLPE insulated power cable, we have tried to observe the characteristics on water treeing ( bow-tie type ) using several electrolyte solutions such as $CH_3COOH$, $MgCl_2$,HCl and NaCl solution and tap water. Bow-tie tree density in $CH_3COOH$ and $MgCl_2$ solution was higher than in any other solution, and the growth of tree was stimulated in NaCl and $CH_3COOH$ solution, and diffusion of bow-tie trees into insulation in $MgCl_2$, HCl and NaCl solutions was faster than in $CH_3COOH$ solution and water. Also, although the increase of applied voltage caused bow-tie tree density to be high, it didn't affect the growth of tree maximum length noticeably.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.10
• /
• pp.1666-1673
• /
• 2020

Objective: To determine the effect of three salting treatments (control, 100% NaCl; T1, 60% NaCl and 40% KCl; T2, 50% NaCl, 40% KCl, and 10% MgCl₂) on meat quality of sausages during storage. Methods: Various types of curing salts were used for processing of salamis. Physico-chemical and sensory evaluation of the sausages were analyzed during 4 weeks of ripening. Results: The pH values and salinity contents were the highest in control, while they were the lowest in T2 at 4 weeks (p<0.05). Control and T1 had less thiobarbituric acid reactive substances than T2 at 2 weeks (p<0.05). The volatile basic nitrogen levels in T1 were similar to control and lower than T2 at 2 and 4 weeks (p<0.05). Moreover, T1 samples were redder and had a higher saturation index (C^⋆) value when compared to the others. T2 showed greater hardness, gumminess and chewiness when compared with the control (p<0.05). Control was comparable to T1 for sensory attributes. Conclusion: Sodium chloride may be partially substituted with potassium chloride without negatively influencing meat quality of sausages up to 4 weeks of storage. These results could help to develop low-sodium sausages.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.322-327
• /
• 2007

Mineral salts in medium usually profoundly influence microorganism growth and protein synthesis. In order to produce microbial transglutaminase (MTG) with a high yield from Streptoverticillium mobaraense, we screened the minerals $CaCl_2,\;CoCl_2,\;FeSO_4,\;ZnSO_4,\;MnSO_4\;and\;CuSO_4$ for MTG fermentation. The results indicated that appropriate $FeSO_4$ concentrations could significantly promote cell growth and stimulate the production of MTG. With 15 mg/L of $FeSO_4$ added to medium, 58% improvements were noted in MTG productivity (2.24 U/mL). NaCl, $CaCl_2,\;and\;CoCl_2$ enhanced MTG productivity by less than 15%, and the optimal concentrations were determined as 1 g/L, 2 g/L, and 30 mg/L respectively. Furthermore, it was determined that 7.5 mg/L of $ZnSO_4$ in medium could augment MTG productivity by 20% and induce the stationary phase for MTG production to a period 24 hr earlier. This basic and novel discovery should result in the development of a good complement to the previously defined culture media for MTG fermentation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.395-402
• /
• 2001

A fusant FG-21 was selected on the basis of higher ${\gamma}-GTP$ activity following fusion process between SM-2 and SM-10 of Bacillus subtilis mutants. ${\gamma}-GTP$ activity of the mutant FG-21 was increased up to 612 U/mL when grown for 36 hr at $37^{\circ}C$ in culture media containing 1% glycerol 1% glycerol, 1% peptone, 0.1% citric acid, 5 mM $K_2HPO_4$, 1 mM $FeCl_3$, 1 mM $MgCl_2$, 1 mM $NH_4Cl$, pH 7.0. In fusnat FG-21, the ratio of protein to total sugar contents for biopolymer A was 38 to 59. for biopolymer B from parental strains it was 19 to 78. Fructose contents determined by HPLC were $573.7\;\mu\textrm{g}/mg\;and\;764.4\;\mu\textrm{g}/mg$ for biopolymer A and B, respectively. And glutamic acid content were $163.7\;\mu\textrm{g}/mg\;and\;94.6\;\mu\textrm{g}/mg$ for biopolymer A and B, respectively. In fusant FG-21, the ratio of fructose to glutamic acid contents for biopolymer A was 78 to 22. For biopolymer B from parental strains it was 89 to 11.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.4
• /
• pp.330-336
• /
• 2009

Purpose: We established radiolabeling conditions of NOTA and DOTA with a generator-produced PET radionuclide $^{68}$Ga and studied in vitro characteristics such as stability, serum protein binding, octanol/water distribution, and interference with other metal ions. Materials and Methods: Various concentrations of NOTA 3HCl and DOTA 4HCl were labeled with 1 mL $^{68}$GaCl$_3$ (0.18$\sim$5.75 mCi in 0.1 M HCl in various pH. NOTA 3HCl (0.373 mM) was labeled with $^{68}$GaCl$_3$(0.183$\sim$0.232 mCi/0.1 M HCl 1.0 mL) in the presence of CuCl$_2$, FeCl$_2$, InCl$_3$, FeCl$_3$, GaCl$_3$, MgCl$_2$ or CaCl$_2$ (0$\sim$6.07 mM) at room temperature. The labeling efficiencies of $^{68}$Ga-NOTA and $^{68}$Ga-DOTA were checked by ITLC-SG using acetone or saline as mobile phase. Stabilities, protein bindings, and octanol distribution coefficients of the labeled compounds also were investigated. Results: $^{68}$Ga-NOTA and $^{68}$Ga-DOTA were labeled optimally at pH 6.5 and pH 3.5, respectively, and the chelates were stable for 4 hr either in the reaction mixture at room temperature or in the human serum at 37$^{\circ}C$. NOTA was labeled at room temperature while DOTA required heating for labeling. $^{68}$Ga-NOTA labeling efficiency was reduced by CuCl$_2$, FeCl$_2$, InCl$_2$, FeCl$_3$ or CaCl$_3$, however, was not influenced by MgCl$_2$ or CaCl$_2$. The protein binding was low (2.04$\sim$3.32%). Log P value of $^{68}$Ga-NOTA was -3.07 indicating high hydrophilicity. Conclusion: We found that NOTA is a better bifunctional chelating agent than DOTA for $^{68}$Ga labeling. Although, $^{68}$Ga-NOTA labeling is interfered by various metal ions, it shows high stability and low serum protein binding.

• Clean Technology
• /
• v.26 no.2
• /
• pp.137-144
• /
• 2020

Metal-impregnated activated carbons were prepared via ultrasonic-assisted impregnation method for regeneration and low ammonia concentration. Magnesium and copper were selected as metals, while chloride (Cl^-) and nitrate (NO₃^-) precursors were used to impregnate the surface of activated carbon. The physical and chemical properties of the prepared adsorbents were characterized by TGA, BET, and NH₃-TPD. The ammonia breakthrough test was carried out using a fixed bed and flowing ammonia gas (1000 mg L^-1 NH₃, balanced N₂) at 100 mL min^-1, under conditions of temperature swing adsorption (TSA) and pressure swing adsorption (PSA, 0.3, 0.5, 0.7, 0.9 Mpa). The adsorption and desorption performance of ammonia were in the order of AC-Mg(Cl) > AC-Cu(Cl) > AC-Mg(N) > AC-Cu(N) > AC through NH₃-TPD and TSA and PSA processes. AC-Mg(Cl) using MgCl₂ showed the average adsorption amount of 2.138 mmol/g at TSA process. Also, AC-Mg(Cl) showed the highest initial adsorption amount of 3.848 mmol/g at PSA 0.9 Mpa. When metal impregnated the surface of the activated carbon, it was confirmed that not only physical adsorption, but also chemical adsorption increased, making enhancement in adsorption and desorption performances possible. Also, the prepared adsorbents showed stable adsorption and desorption performances despite repeated processes, confirming their applicability in the TSA and PSA processes.

• Korean journal of food and cookery science
• /
• v.20 no.2
• /
• pp.119-125
• /
• 2004

Effects of various chemical additives and heat treatments were investigated on the wheat flour doughs and breads. Ammonium ferric citrate, Ca-citrate, CaCl$_2$, FeSO$_4$, MgCl$_2$and ZnO were mixed respectively to the flour up to 0.1% of flour dry weight basis. Ammonium ferric citrate and ferric sulfate showed no significant effects on the dough properties and magnesium sulfate, calcium chloride and zinc oxide increased elastic properties and optimum dough mixing time. However, calcium citrate and magnesium chloride showed no significant effects on the dough mixing properties. Most of chemicals were detrimental on the bread volume except MgSO$_4$ and CaCl$_2$. Breads with MgSO$_4$ and CaCl$_2$ retained the equal or slightly higher volume compared to control bread. Crumb and crust colors of breads with addition of chemicals were changed to lighter than that of control bread. L values both of crumb and crust increased with addition of chemicals except Ca-citrate. To inactivate the endogenous enzymes of flour, flour was roasted under electric oven, exposed to UV and microwave. Those heat treatments of flour increased dough stability and produced no dough breakdown after optimum mixing time. However, bread volume of heat-treated flour decreased.