• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.3
• /
• pp.134-146
• /
• 1997

Consumers have recently preferred to purchase extensive UV intercepting products, which are waterproof and free from side effects on skin. Testing Cytoroxicity in SR method, cell survivial ratio of UV-B interceptors decreased above 0.08W/V%, and so did that of UV-A interceptors above 0.06W/V%. Also, Patch-test of inorganic UV interceptors resulted in no skin irritation even below 10.0 and 11.25. UV interceptors in the sunlight showed yellowish discoloration in 5 to 14 days. In absorption curves, UV-B was most suitable for Octyl methoxycinnamate and UV-A for Butyl methoxy dibenzoylmethane. Fro this reason, Nylonpoly UVA/UVB the material of OMC and BMDM coated with Nylon & polyethylene, was used as the organic UV interceptor. And zinc oxide and titanium dioxide was used as inorganic UV ibterceptors. The appropriate mixture ratio of ZnO and TiO2 was 6 to 4.6% of ZnO, 4% of TiO2 and 5% of Nylonpoly UVA/UVB were all combined with our sunscreen cream. The SPF value of in-vivo applied to a guinea pig was 34.9 and that of in-vivo was 38.5. Cyclomerhicone and dimerthicone were used in water-in-Silicone system. Ceryl diverhicone and sorbitan sesquioleate were used as emulsifiers and MgSO4, 7H2O, Mg-stearate/Mg-Al-stearate copolymer as emulsification stabilizers. In practical application, each SPF duration of O/W type and W/S type containing sunscreen cream of the same content showed that W/S type of sunscreen cream was 5 times as durable as the other. This product is fit for using in swimming, climbing or skiing. This research is to minimize skin trouble used by UV interceptors and to make one with proper softness, skin safety and UV intercepting efficiency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.819-826
• /
• 2002

In this paper, the performance of Au / $Ba_{0.5}Sr_{0.5}TiO_3$ (BST) / Magnesium oxide (MgO) two-layered electrically tunable band-pass Filters (BPFs) is demonstrated. The devices consist of microstrip, coplanar waveguide (CPW), and conductor-backed coplanar waveguide (CBCPW) structures. These BST thin film band-pass filters have been designed by the 2.5 D field simulator, IE3D, Zeland Inc., and fabricated by thin film process. The simulation results, using the 2-pole microstrip, CPW, and CBCPW band-pass filters, show the center frequencies of 5.89 GHz, 5.88 GHz, and 5.69 GHz, and the corresponding insertion losses are 2.67 dB, 1.14 dB, and 1.60 dB, with 3 %, 9 %, and 7 % bandwidth, respectively. The measurement results show the center frequencies of 6.4 GHz, 6.14 GHz, and 6.04 GHz, and their corresponding insertion losses are 6 dB, 4.41 dB, and 5.41 dB, respectively, without any bias voltage. With the bias voltage of 40 V, the center frequencies for the band-pass filters are measured to be 6.61 GHz, 6.31 GHz, and 6.21 GHz, and their insertion losses are observed to be 7.33 dB, 5.83 dB, and 6.83 dB, respectively. From the experiment, the tuning range for the band-pass filters are determined as about 3 % ~ 8 %.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2842-2849
• /
• 2024

The amorphous glasses containing PbO, ZnO, MgO, and B₂O₃ have been fabricated using the melt quenching technique. The structural properties have been analysed using the Fourier-transform infrared (FTIR) and Raman spectroscopy. Derivative of Absorption Spectra Fitting (DASF) method have been used to estimate the band gap energy from the UV-Vis absorption data which decreases from 3.02 eV to 2.66 eV with increasing the concentration of the PbO.The four glass samples 0.284 and 0.826 MeV showed unique variations in terms of gamma attenuation ability. LZMB4 glass sample proved to be the mist effective in terms of shielding of gamma radiation as it requires little distance compared to LZMB3, LZMB2 and LZMB1 to attenuate. RPE revealed a raise with increase in the thickness of the material and reduces as the energy raises. TF is superior in LZMB1 compared to LZMB2, LZMB3 and LZMB4, confirming that, LZMB4 will attenuate better. The Z_Eff of the materials was seen falling as the energy increases, confirming that the linear attenuation coefficient of the glass materials decreases when the energy is increased. The results confirmed that, glass material LZMB4 is the best option especially for gamma radiation shielding applications compared to LZMB3, followed by LZMB2, then LZMB1.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.150-150
• /
• 2012

본 연구는 1차원 나노 구조의 합성과 기초적 분석에 관한 연구로써 특히 무기 산화물 나노재료를 그 대상으로 하였다. 내용으로는 첫째, 1차원 코어 나노와이어의 합성을 하였고 Thermal evaporation, substrate의 가열, 그리고 MOCVD 를 사용한 결과들을 나열한다. 둘째, 코어-쉘 나노와이어를 제작하기 위하여 특히 쉘층의 제작방법을 연구하였는데 PECVD, ALD, 그리고 sputtering에 의한 결과들을 나열하고 간단히 설명한다. Thermal evaporation에 의한 1차원 나노와이어 합성의 경우는 MgO의 예를 들었는데 MgO 나노와이어는 Au가 증착된 기판을 열처리하여 Au dot를 형성하고 이의 morphology를 조절하여 최적의 나노와이어 합성조건을 선정하였다. 이로써 기판 morphology가 나노선의 성장및 형상에 영향을 준다는 사실을 알게 되었다. 이 사실은 In2O3기판을 사용하고 이의 표면거칠기를 열처리로 조절하므로써 역시 나노와이어의 성장을 촉진하는 방법을 찾아내었다. 또한 thermal evaporation공법은 source분말의 선택에 따라 다양한 소재를 제작가능하다는 결과를 제시하였다. 예를 들면 SiOx 층이 precoating된 chamber내에서 MgO 나노선을 합성하는 것과 동일한 조건으로 실험을 진행하면 Mg2SiO4 나노와이어가 형성된 것을 확인하였다. 또한 Sn과 MgB2 분말을 함께 적용할 경우 Sn tip을 가진 MgO 나노와이어를 얻을 수 있었다. 이는 Sn이 동시에 촉매의 역할을 하였기 때문일 것으로 추정된다. 한편 Sn과 Bi 혼합분말을 적용한 경우 Bi2Sn2O7 신소재 tip을 포함한 SnO2 나노와이어를 얻을 수 있었다. 이 경우 Bi원자가 적절한 촉매의 역할을 수행한 것으로 사료된다. Substrate의 가열공법에서는 Si wafer상에 각종 금속 즉 Au, Ag, Cu, Co, Mo, W, Pt, Pd등 초박막을 DC sputter 로 형성한후 annealing하는 기술을 사용하였다. 특기할 만한 것은 Co를 사용한 경우 나노와이어의 spring구조를 얻을 수 있었다는 점이다. MOCVD에 의하여는 Ga2O3및 Bi2O3 나노와이어를 비교적 저온에서 합성하였고 In2O3의 경우는 독특한 나노구조를 형성하였고 이의 결정학적 특성에 대하여 조사하였다.

• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.97-110
• /
• 1981

This study was conducted in order to investigate the status of harmful working environ ment on twelve rubber and ten chemical products manufacturing industries in Busan area over a period of five months from lune 1 to October 31, 1980. The summarized results were as follows: 1. The highest and lowest mean values of harmful environmental elements in workroom of rubber products manufacturing industries were noted in twisting (98.7dB) and coating department (77.3dB) to noise, molding ($6.43mg/m^3$) and forming ($1.33mg/m^3$) to dust, bonding (toluene 463.7ppm, xylene 457.8ppm and benzene 111.8ppm, respectively) and splicing (toluene 90.0ppm, xylene 83.3ppm and benzene 6.7ppm, respectively) to organic solvents, respectively. Also in chemical products manufacturing, they were noted in grinding (95.1dB) and shining department (76.8dB) to noise, packing ($4.30mg/m^3$) and staining ($3.20mg/m^3$) to dust, shining (393.3ppm and 375.0ppm, respectively) and varnishing(125.5ppm and 121.7ppm, respectively) to toluene and xylene, and scattering (51.8ppm) and mixing (23.9ppm) to benzene, respectively. 2. The mean values of harmful elements in workroom of rubber products manufacturing were 86.3dB to noise, $4.16mg/m^3$ to dust, 258.2ppm to toluene, 230.3ppm to xylene, and 5 4.0ppm to benzene, respectively. Also in chemical products manufacturing, they were 85.2dB to noise, $3.69mg/m^3$ to dust, 227.9ppm to toluene, 213.2ppm to xylene, and 36.3ppm to benzene, respectively. 3. Number of workers exposed to harmful working environment, over TLV, of a total 10,195 workers in rubber products manufacturing were 1,002(9.8%) to noise, 212 (2.1%) to dust, 1,581(15.5%) to toluene, 1,509(14,8%) to xylene, and 1,524(15.0%) to benzene, respectively. Number of workers exposed to harmful working environment, over TLV, of a 1,913 workers in chemical products manufacturing were 112(5.9%) to noise, 132(6.9%) to each organic solvent, respectively. 4. The values of noise and dust of rubber and chemical products manufacturing in 1980 were lower then those in 1977, but the value of organic solvent in 1980 was similar with that in 1977.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.1
• /
• pp.37-47
• /
• 2018

Volcanic ash samples of historical eruptions from Mt. Baekdu were analyzed for major oxides, trace and rare earth elements by a variety of analytical techniques. The results indicate that the ashes consist of approximately 58.8~71.1 wt.% $SiO_2$, 9.6~16.8 wt.% $Al_2O_3$, 4.5~6.9 wt.% $Fe_2O_{3t}$, 0.1~1.7 wt.% MgO, 0.3~1.6 wt.% CaO, 5.2~6.3 wt.% $Na_2O$, 4.3~5.9 wt.% $K_2O$ and less than 1.2 wt.% $TiO_2$. Thirty two trace metals including Ba, Cu, Cr. Co, Ni, Sr, V, Zn, and Zr were analyzed. The ashes can be divided two groups: group A(1 ka Millennium pumice, 1668 and $190{\underline{3}}$ pumice) and group B(1702 pumice) according to the relative enrichment of HREEs. The abundances of heavy metals such as Cu, Co, Mn, and Zn were relatively low. As compared to the Sakurajima volcanic ash, Baekdusan volcanic ash has low concentrations of Y, Nb, Pb, U, Sc, V, Ni and Cu and high concentrations of Zr, Ba, Hf, Cr, Co, Zn and rare-earth (except Eu).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.10
• /
• pp.834-838
• /
• 2011

This research shows the electrical characteristic using excellent epoxy nano-composite of MgO 5.0 wt% and $SiO_2$ 0.4 wt% in mechanical strength test depending on nano-additive. First of all, volume resistance depending on nano-additive and temperature using high resistance meter (HP. 4329A) by increasing 10, 100, 1,000 V of applying voltage was measured. Moreover, temperature range of $25{\sim}120^{\circ}C$ with virgin sample was tested using TO-9B oven by Ando Company. The result showed that virgin and the samples added with MgO and $SiO_2$ had similar value of volume resistance in low temperature and low electric field region and reduced with slow slope. The nano-composite's volume resistance of sample added with MgO and $SiO_2$ had higher value than virgin sample's volume resistance in high temperature region more than $80^{\circ}C$. Moreover, the slope has steeply reduced. The volume resistance of sample added with MgO 5.0 wt% was $8.38{\times}10^{13}\;{\Omega}{\cdot}cm$ and it was 6.8 times more than virgin sample in high temperature at $120^{\circ}C$. The insulation characteristics were constant although filler has changed in low temperature region. But, in high temperature region, the value of volume resistance of sample with MgO 5.0 wt% was 7.6 times more than the virgin sample's volume resistance.

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.991-1003
• /
• 1990

A precipitation method, one of the most effective liquid phase reaction methods, was adopted in order to prepare high-tech Al2O3/ZrO2 composite ceramics. Al2(SO4)3.18H2O, ZrOCl2.8H2O and YCl3.6H2O were used as starting materials and NH4OH as a precipitation agent, various types of metal hydroxides were obtained by single precipitation(series A) and co-precipitation(series B) method at the pH condition between 7 and 11. Fine Al2O3-ZrO2 powders were prepared at optimum calcination condition and the effects of ZrO2 on microstructures and mechanical properties of Al2O3 were investigated. The composition of Al2O3/ZrO2 composites wax fixed as Al2O3-15 v/o ZrO2(＋3m/o Y2O3). ZrO2 limited the grain growth of Al2O3 and increased grain size homogeneity of Al2O3 more effectively than MgO.Flexural strength values in Al2O3 and Al2O3/ZrO2 composites were 340-430 MPa and 540-820 MPa, respectively, and the effect of strength improvement showed 20-50% by adding ZrO2 to Al2O3. Fracture toughness of Al2O3/ZrO2 composites was improved by stress-induced phase transformation of tetragonal ZrO2 and toughening effect by microcrack was not observed. Also, ZrO2 particles located at Al2O3 grain junction contributed to toughening, while spherical ZrO2 particles located within Al2O3 grain did not contribute to toughening. Weibull moduli of Al2O3 ceramics and Al2O3/ZrO2 composites of series A and series B were 4.34, 5.17 and 9.06, respectively. Above 0.5 of failure probability, strength values in Al2O3 ceramics and Al2O3/ZrO3 composites of series A and series B were above 400 MPa, 700 MPa and 650 MPa, respectively.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.1
• /
• pp.5-13
• /
• 2022

Sunbigi tree(Vitex rotundifolia L.f.), which grows wild in the southern part of Korea and along the coast of the West Sea, has a lot of useful value in terms of resource utilization. Since ancient times, it has been used as folk medicine or herbal medicine in the private sector. Although the leaves and stems have a strong scent, the fruit also has a strong scent, so there are some studies on extracting essential oil from the fruit of Sunbigi tree and analyzing the ingredients, but there are few studies on the fragrance component by extracting hydrosol. The reason is that the fruits are hard and it is difficult to identify the active ingredients contained in the general extraction method. Therefore, in this study, the results of analyzing the components contained in the fragrance of hydrosol obtained by extracting hard fruits at high temperature by different extraction methods are as follows. 1. The extraction condition with the highest flavonoid content was 30.57 mg/g with ethanol, followed by hot water extract at 18.26 mg/g and water extract at 9.69 mg/g with the lowest. 2. As a result of distillation extraction from the fruit of Sunbigi tree, the fragrance of hydrosol is 3-Methyl-2-butenoic acid, cyclobutyl ester, Eucalyptol, L-alpha-Terpineol, 1H-Cycloprop[e]azulen-7-ol, decahydro-1 ,1,7-trimethyl-4-methylene-, [1ar-(1a.alpha.,4a.alpha.,7.beta.,7a.beta.,7b.alpha.)] were found to be many.

• Nutrition Research and Practice
• /
• v.13 no.6
• /
• pp.473-479
• /
• 2019

BACKGROUND/OBJECTIVES: Anti-inflammatory and antioxidative activities of luteolin and luteolin-7-O-glucoside were compared in galactosamine (GalN)/lipopolysaccharide (LPS)-induced hepatitic ICR mice. MATERIALS/METHODS: Male ICR mice (6 weeks old) were divided into 4 groups: normal control, GalN/LPS, luteolin, and luteolin-7-O-glucoside groups. The latter two groups were administered luteolin or luteolin-7-O-glucoside (50 mg/kg BW) daily by gavage for 3 weeks after which hepatitis was induced by intraperitoneal injection of GalN and LPS (1 g/kg BW and $10{\mu}g/kg\;BW$, respectively). RESULTS: GalN/LPS produced acute hepatic injury by a sharp increase in serum AST, ALT, and $TNF-{\alpha}$ levels, increases that were ameliorated in the experimental groups. In addition, markedly increased expressions of cyclooxygenase (COX)-2 and its transcription factors, nuclear factor $(NF)-{\kappa}B$ and activator protein (AP)-1, were also significantly attenuated in the experimental groups. Compared to luteolin-7-O-glucoside, luteolin more potently ameliorated the levels of inflammatory mediators. Phase II enzymes levels and NF-E2 p45-related factor (Nrf)-2 activation that were decreased by GalN/LPS were increased by luteolin and luteolin-7-O-glucoside administration. In addition, compared to luteolin, luteolin-7-O-glucoside acted as a more potent inducer of changes in phase II enzymes. Liver histopathology results were consistent with the mediator and enzyme results. CONCLUSION: Luteolin and luteolin-7-O-glucoside protect against GalN/LPS-induced hepatotoxicity through the regulation of inflammatory mediators and phase II enzymes.