• Journal of Bio-Environment Control
• /
• v.17 no.1
• /
• pp.38-42
• /
• 2008

This study was conducted to investigate distribution of selenium in Gangwon highland Province and to confirm the effect of sodium selenate added nutrient solution on the selenium content of some western vegetables; beet, broccoli, cabbage lettuce, celery, and parsley. The contents of selenium were distributed from 0.024 to $0.038\;mg{\cdot}kg^{-1}$ in soil of Gangwon highland province. As the selenium content in soil increased, the selenium content in broccoli was increased in highland of Gangwon province. The selenium content of broccoli showed $10.5{\sim}17.9\;mg{\cdot}kg^{-1}DW$ 1311owe4 by celery ($6.02\;mg{\cdot}kg^{-1}DW$). Beet, cabbage lettuce, and parsley contained just about $1\;mg{\cdot}kg^{-1}DW$ in highland of Gangwon province. Some western vegetables grown by fertigation supplied $2\;mg{\cdot}L^{-1}$ sodium selenate were shown better growth and higher selenium content than those of $0\;mg{\cdot}L^{-1}$ sodium selenate supplied treatment(control). The selenium contents of western vegetables supplied $2\;mg{\cdot}L^{-1}$ sodium selenate in fertigation culture for 60 days were $76.2\;mg{\cdot}L^{-1}$ in broccoli, $69.1\;mg{\cdot}L^{-1}$ in parsley, $63.2\;mg{\cdot}L^{-1}$ in celery, $54.2\;mg{\cdot}L^{-1}$ in beet, $8.3\;mg{\cdot}L^{-1}$ in cabbage lettuce. Those selenium content of broccoli, celery, and parsley treated $2\;mg{\cdot}L^{-1}$ sodium selenate were followed the order 4.2 times, 10.5 times and 62.5 times higher in compared to control.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.6
• /
• pp.491-496
• /
• 2000

A RAG25 gene regulating flowering time was introduced into Codonopsis lanceolata through high efficiencies (ca. 90%) of plant regeneration. The leaf explants were immersed in YEP media containing Agrobacterium tumefaciens (pGA 1209) harboring RAG25 gene, and cocultivated for 3 days. After cocultivation, they were cultured in shoot inducing media (SIM), N2B2 (NAA 2 mg/L, BA 2 mg/L and kanamycin 20 mg/L) and N2B4 (NAA 2 mg/L, BA 4 mg/L and kanamycin 20 mg/L), and the putative transformants were regenerated. The introduction of nptII and RAG25 gene into Codonopsis lanceolata was confirmed by 0.7 kb and 0.6 kb bands from polymerase chain reaction and reconfirmed by Southern hybridization using PCR product of RAG25 gene.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.1
• /
• pp.33-36
• /
• 1998

Guzmania was propagated through in vitro culture of lateral shoots. When new shoots grown in greenhouse were cut and cultured in vitro, contamination rate was very high at about 80% in the first stage of in vitro culture. Among cytokinin treatments for agar medium, 2.0 mg/L BA was most effective for shoot multiplication, and those with 0.5 mg/L kinetin and 0.5~1.0 mg/L BA were favorable for shoot multiplication. BA was more effective for shoot multiplication than kinetin, and shoot multiplication was more enhanced when 2.0 mg/L BA was combined with 0.1~0.5 mg/L IAA than 2.0 mg/L BA alone. The medium with 2.0 mg/L BA and 0.1 mg/L IAA showed the highest rate of shoot multiplication with about 8.7 in shoot number, and those with 2.0 mg/L BA and 0.5~1.0 mg/L IAA also resulted in high multiplication of shoots. Shoots were multiplicated more in liquid rotation culture(80 rpm) with the medium containing 0.5 mg/L BA and 0.1 mg/L IAA than liquid stagnating and solid cultures. Regenerated shoots formed roots very favorably in the medium supplemented with 2.0 mg/L IBA.

• Journal of the Korean Ceramic Society
• /
• v.33 no.3
• /
• pp.299-306
• /
• 1996

We invesgated the fesibility of thin films deposition by pyrolysis of metalorganic precursors using chemical beam deposition (CBD) process. We attempted to understand the effects of deposition variables such as substrate temperature operating pressure effusion cell temperature and H2 partial pressure on the properties of MgF2 grown by CBD. Mg(tfac)2 was used as a precursor. MgF2 thin films were always grown in an amorphous state and crystallized bypost-annealing. he higher the substrate temperature and the lower the operating pressure the less the impurities I the deposited MgF2 thin films. H2 gas has to be supplied for the pyrolitic reaction of Mg(tfac)2 decomposition. MgF2 films annealed in H2 have lower C impurity than those annealed in O2. But their crysatllinity was independent of annealing atmosphere. The optimum conditions for the prepara-tion of MgF2 films by CBD process were as following : The substrate temperature 55$0^{\circ}C$ the operating pressure 10-4 torr; effusion cell temperature 21$0^{\circ}C$ the percentage of H2 100% Post-annealing in H2 gas was required to remove residual carbon and to form MgF2 crystalline phase.

• Korean Journal of Materials Research
• /
• v.22 no.1
• /
• pp.54-60
• /
• 2012

The particle size of MgO was examined as a function of the Na content in $Mg(OH)_2$ powders and the calcination temperature. $Mg(OH)_2$ suspension was obtained by dropwise precipitation of $Mg(NO_3)_2{\cdot}6H_2O$ and NaOH solutions. The suspension was diluted by varying the dilution volume ratio of distilled water to $Mg(OH)_2$ suspension to change the Na salt concentration in the suspension. $Mg(OH)_2$ slurry was filtered and dried at $60^{\circ}C$ under vacuum, and then its $Mg(OH)_2$ powder was calcined to produce MgO with different amount of Na content at $500\sim900^{\circ}C$ under air. Investigation of the physical and chemical properties of the various MgO powders with dilution ratio and calcination temperature variation was done by X-ray diffraction, transmission electron microscopy, BET specific surface area and thermal gravimetric analysis. It was observed that MgO particle size could depend on the condition of calcination temperature and dilution ratio of the $Mg(OH)_2$ suspension. The particle size of the MgO depends on the Na content remaining in the $Mg(OH)_2$ powder, which powder was prepared by changing the dilution ratio of the $Mg(OH)_2$ suspension. This change increased as the calcination temperature increased and decreased as the dilution ratio increased. The growth of MgO particle size according to the increase of temperature was more effective when there was a relatively high content of Na. The increase of Na content lowered the temperature at which decomposition of $Mg(OH)_2$ to MgO took place, thereby promoting the crystal growth of MgO.

• Clean Technology
• /
• v.23 no.1
• /
• pp.27-33
• /
• 2017

In this study, toxicities of seven metals (Cu, Cd, Cr, As(III), As(V), Zn, Ni) and five metal oxide nanoparticles (NPs: CuO, ZnO, NiO, $TiO_2$, $Fe_2O_3$) were evaluated based on the growth of Chlorella vulgaris. Effect on algae growth was evaluated by integrating the results of absorption, chlorophyll content, and cell count. The toxicity rankings of metals was observed as Cr ($0.7mgL^{-1}$) > Cu ($1.7mgL^{-1}$) > Cd ($3.2mgL^{-1}$) > Zn ($3.9mgL^{-1}$) > Ni ($13.2mgL^{-1}$) > As(III) ($17.8mgL^{-1}$) ${\gg}$ As(V) (> $1000mgL^{-1}$). Slightly different orders and sensitivities of metal toxicity were examined depending on endpoints of algal growth. In case of NPs, regardless of endpoints, similar toxicity rankings of NPs ($TEC_{50}$) were observed, showing ZnO ($2.4mgL^{-1}$) > NiO ($21.1mgL^{-1}$) > CuO ($36.6mgL^{-1}$) > $TiO_2$ ($62.5mgL^{-1}$) > $Fe_2O_3$ ($82.7mgL^{-1}$). These results indicate that an integrating results of endpoints might be an effective strategy for the assessment of contaminants.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.75-76
• /
• 2006

New PM route via bulk mechanical alloying is developed to fabricate the solid solution semi-conductive materials with $Mg_2Si_{1-x}Ge_x$ and $Mg_2Si_{1-y}Sn_y$ for 0 < x, y < 1 and to investigate their thermoelectric materials. Since $Mg_2Si$ is n-type and both $Mg_2Ge$ and $Mg_2Sn$ are p-type, pn-transition takes place at the specified range of germanium content, x, and tin content, y. Through optimization of chemical composition, solid-solution type thermoelectric semi-conductive materials are designed both for n-and p-type materials.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.12
• /
• pp.1331-1336
• /
• 2006

The Juam reservoir, hydrological investigations on the catchment environment and pollutants inflow have been carried out simultaneously. The average COD in 1992 observed in Juam reservoir was 2.3 mg/L, and reached to 2.72 mg/L in 2005 that is increased 0.23 mg/L for 13 years. Following this trend, the water duality is expected to deteriorate down to the second-grade water quality exceeding the 3 mg/L limit in 2010. The concentration exceeding the value of 46.5 $mg/m^3$ will not guarantee the water quality better than $2^{nd}$ grade drinking water resource since correlative between COD and chl-a is y=0.0732x+2.5953 its $r^2=0.8141$. This result will help control the algal growth in the future by taking into account the expected value as a monitoring target.

• Journal of Powder Materials
• /
• v.18 no.3
• /
• pp.283-289
• /
• 2011

Magnesium hydroxide sulfate hydrate whiskers ($5Mg(OH)_2{\cdot}MgSO_4{\cdot}3H_2O$, abbreviated 513 MHSH) were prepared using hydrothermal reaction with magnesium oxide (MgO) and magnesium sulfate ($MgSO_4{\cdot}7H_2O$) as the starting materials. The effects of the molar ratio of $MgSO_4$/MgO and amount of $NH_4OH$ were studied. As a result, 513 MHSH whiskers co-existed with hexagonal plate $Mg(OH)_2$ at low concentration of $SO_4^{2-}$. The molar ratio of $MgSO_4{\cdot}7H_2O$/MgO was 7:1, uniform 513 MHSH whiskers were formed without impurity such as $Mg(OH)_2$. Appropriate amount of $NH_4OH$ has affected to formation of high quality MHSH. Their morphologies and structures were determined by powder X-ray diffraction (XRD) scanning electron microscopy (SEM) and thermo-gravimetric analyzer (TGA).

• Journal of Korea Foundry Society
• /
• v.24 no.6
• /
• pp.340-346
• /
• 2004

The plan for obtaining a good combination of strength and castability appeared feasible and the following observations were made. 1. In Al-12Mg-6.6Zn-xSi alloys, more primary $Mg_2Si$ phase formed with reduced $Al_3Mg_2$ phase, as Si content is necessary for an effective solution heat treatment because the solidus temperature is very low silicon contents. 2. A high tensile strength could be obtained in the heat-treated Al-12Mg-5.5Zn-5Si alloy attributed in the heat-treated Al-12Mg-5.5Zn-5Si alloy attributes to fine $MgZn_2$ particles that precipitated uniformly in the matrix. 3. Al-12Mg-5.5Zn-Si alloys showed excellent casting capabilities such as hot cracking resistance and fluidity compared to the reference commercial alloys. 4. The wear resistance of Al-12Mg-5.5Zn-5Si alloy was superior to that of A7075 alloy, and even higher resistance is expected if the morphology and size of primary $Mg_2Si$ phase is carefully controlled.