• Journal of Sericultural and Entomological Science
• /
• v.13 no.1
• /
• pp.49-59
• /
• 1971

This experiment was conducted, how making use of "Seracol 100", a kind of nonionic surface active reagent, during cocoon cooking and silk reeling process which is mainly used in Korea and developed by one of the authors since 1965. Main purpose of the experiment is to investigate the influence of the activity of the reelability aid reagent on various degree of hardness component and various salts which are contained in filature water being used by silk factories now. Specifically, it was tried to determine the effects of the reelability aid reagent added to each sample water of artificially differentiated the degree of hardness component upon sericin solubility. Some of the major findings are summarized as follows. 1. "Seracol 100", with below 5$^{\circ}$dH water, increased sericin solubility in each sample water, but above $10^{\circ}$dH the effect of it shows a significant relationship with the different degree of hardness component. Besides the component (MgCO$_3$)$_4$ㆍMg(OH)$_2$, generally, the higher the degree of hardness in the water, the less the amount of desolved sericin in the water showed. There is little or no difference between 1000 times diluted "Seracol 100" water and 2000 times diluted "Seracol 100" water in terms of sericin solubility. 2. The different kind of degree of hardness component shows a significant relationship with sericin solubility, In case use of "Seracol 100", Mg hardness component affected on the sericin solubility more than Ca hardness. But in the control, contrary to this, that is Ca hardness component did more than Mg hardness, 3. The different kind of salts in degree of hardness component show a significant relationship with sericin solubility. In the control water, nitrate is the greatest among salts affecting on sericin solubility, next chloride and sulfate are in order. In case of "Seracol 100" water, chloride is the least among salts, below $10^{\circ}$dH, next sulfate and nitrate are in order, and above 15$^{\circ}$dH, next nitrate and sulfate are in order. 4. In case of "Seracol 100" water, the more contained heavy metal salts (Fe, Al, Cu, Mn) in the water, the less sericin solubility showed. It is found that there is little or no difference among other salts in terms of sericin solubility. But alkaline metal salt remarkably increased sericin solubility. 5. In case of "Seracol 100" water, tinting of the water was affected by Ca salts more than by Mg salts. Among other salts, only Al and Fe affected on the tinting of the water, specifically, in view of the fact that "Seracol 100" water increase the tinting of Fe salt water, but decrease the tinting of raw silk. It is thought that "Seracol 100" deter Fe$^{+2}$ from absorbing to raw silk by deteriorating the activity of Fe$^{+2}$ . 6. "Seracol 100" have the effect on osmosis of the water, After treatment until 2hrs the osmosis of 1000 times diluted "Seracol 100" water is the greatest, next orders are 2000 times diluted "Seracol 100" and control. From 2 hrs to 6 hrs the osmosis of 2000 times diluted water is the greatest, next orders are 1000 times diluted water and control. After 6 hrs the osmosis of the water is the same order as above. 7. In view of tile fact that "Seracol 100" have the effect to control the degree of hardness during the treatment of cocoon layer in the water, it is thought that, in varying degree of hardness in the water, there is a significant relationship between "Seracol 100" and degree of hardness components in cocoon layer.

• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.700-708
• /
• 1996

Electroless plating technique was utilized to flip chip bonding to improve surface mount characteristics. Each step of plating procedure was studied in terms pf pH, plating temperature and plating time. Al patterned 4 inch Si wafers were used as substrstes and zincate was used as an activation solution. Heat treatment was carried out for all the specimens in the temperature range from room temperature to $400^{\circ}C$ for $30^{\circ}C$ minutes in a vacuum furnace. Homogeneous distribution of Zn particles of size was obtained by the zincate treatment with pH 13 ~ 13.5, solution concentration of 15 ~ 25% at room temperature. The plating rates for both Ni-P and Au electroless plating steps increased with increasing the plating temperature and pH. The main crystallization planes of the plated Au were found to be (111) a pH 7 and (200) and (111) at pH 9 independent of the annealing temperature.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3293-3301
• /
• 1974

An experimental work was conducted by using a laboratory-made model dryer to investigate the effect of the rate of natural forced-air on the drying rate of rough rice which was deposited in the deep-bed. The dryer consisted of 8 cylinderical containers with grain holding screen at their bottoms, each of which having 30cm in diameter and 15cm in height. The containers were sacked vertically with keeping them air-tight by using paper tape during dryer operation. Two separate layers of containers were operated in the same time to have two replications. The moisture contents of grains within each bins after predetermined period of dryer operation were determined indirectly by measuring the weight of the individual containers. The air-rates were maintained at 6 levels, or 5, 8, 10, 15, 18 and 20 millimenters of static head of water. The roomair conditions during dryer operation were maintained in the range of 10-l5$^{\circ}C$ in temperature and 40-60% in relative humidity. The results of the study are summarized as follows: 1. Drying characteristics of the grains in the bottom layers were approximately the same regardless of airdelivery rates, giving the average drying rate as about 0.35 percent per hour after 40-hour drying period, during which moisture content (w. b.) reduced from 24 percent to about 10 percent. 2. After about 40-hour drying period, the mean drying rates increased from 0.163 percent per hour to 0.263 percent per hour as air-flow rates increased from 5mm to 87.16mm of static head of water. In the same time, the moisture differences of grains between lower and upper layers varied from 12.7 percent at the air rate of 5mm of water head to 7.5 percent at the air-flow rate of 20mn of water head. Thus, the greater the air-flow rate was, the more overall improvement in drying performance was. Additionally, from the result of ineffectiveness of drying grain positioned at 70cm depth or above by the air rate of 5mm of static head of water it may be suggested in practical application that the height of grain deposit would be maintained adequately within the limits of air-rates that may be actually delivered. 3. Drying after layer-turning operation was continued for about 30 hours to test the effectiveness of reducing moisture differences in the thick layers. As a result of this layer-turning operation, moisture distribution through layers approached to narrow ranges, giving the moisture range as about 7 percent at air-flow rate of 5mm head of water, about 3 percent at 10mm head about 2 percent at 15mm head, and less than 1 percent at 20mm head. In addition, from the desirable results that drying rate was rapid in the lower layers and dully in the upper layers, layer-turning operation may be very effective in natural air drying with deep-layer grain deposit, especially when the forced air was kept in low rate. 4. Even though the high rate of air delivery is very desirable for deep-layer natural-air drying of rough rice, it can be happened that the required air delivery rate could not be attained because of limitation of power source available on farms. To give a guide line for the practical application, the power required to perform the drying with the specified air rate was analyzed for different sizes of drying bin and is given in Table (5). If a farmer selects a motor of which size is 1 or {{{{1 { 1} over {2 } }}}} H.P. and air-delivery rate which ranges from 8~10mm of head, the diameter of grain bin may be suggested to choose about 2.4m, also power tiller or other moderate size of prime motor may be recommended when the diameter of grain bin is about 5.0m or more for about 120cm grain deposit.

• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.625-634
• /
• 2004

The objective of this experiment is to study the possibility of lactate dehydrogenase(LDH) enzyme to prevent lactate accumulation in the rumen, For understanding capacity of bacterial LDH in rumen environments, this study was conducted to explore the effects of temperature, pH, VFAs and metal ions on Lactobacillus sp. FFy111-1's LDH activity, and the LDH activation in rumen fluid accumulated lactate. The optimum pH and temperature of LDH were pH 7.5 and 40$^{\circ}C$, respectively. The LDH activity had a good thennostability at range from 30 to 50$^{\circ}C$. The highest pH stability of the enzyme was at ranges from pH 7.0 to 8.0 and the enzyme activities showed above 64% level of non-treated one at pH 6.0 and 6.5. The LDH was inactivated by VFAs treatments but was enhanced by metal ion treatments without NaCl and $CuSO_4$ Especially, the LDH activity was increased to 127% and 124% of its original activity by 2 mM of $BaCl_2$ and $MnSO_4$, addition, respectively. When the acidic rumen fluid was treated by LDH enzyme of Lactobacillus sp. FFy111-1, the lactate concentration in the rumen fluid was lower compared with non-treated rumen fluid(P<0.05). This lactate reduction was resulted from an action of LDH. It was proved by result of purified D,L-LDH addition that showed the lowest lactate concentration among the treatments(P<0.05). Although further investigation of microbial LDH and ruminal lactate is needed, these findings suggest that the bacterial LDH has the potential capability to decrease the lactate accumulated in an acidic rumen fluid. Also, screening of super LDH producing bacteria and technical development for improving enzyme activity in rumen environment are essential keys for practical application.

• Applied Biological Chemistry
• /
• v.38 no.2
• /
• pp.141-146
• /
• 1995

Changes of physicochemical properties of citron juice prepared by two different extraction methods, rotary-crushing and belt-pressing method, were investigated during the storage at $5^{\circ}C$ and $-20^{\circ}C$. Temperature drop of citron juice extracted by belt-pressing method was faster than that of citron juice prepared by rotary-crushing method and its freezing point was $0.8{\sim}0.9^{\circ}C$. During the storage, pH of stored citron juice with rotary-crushing method was increased up to 3.5 after 6 months storage while that of citron juice extracted by belt-pressing method was not changed significantly during the same storage time. Acidity of rotary-crushed citron juice was reduced a little more than that of belt-pressed citron juice during the storage. However, changes of soluble solid content were influenced largely by the storage temperature than by the extraction method. Contents of formol nitrogen and vitamin C were reduced remarkably in all of stored citron juice and $92{\sim}82%$ of farmol nitrogen and $72{\sim}43%$ of vitamin C were remained after 6 months of storage. Among the changes of color value, L values were reduced in the whole stored citron juice and a and b value had a different change pattern respectively according to the extraction and storage temperature. Changes in the content of both amino acid and fatty acid compositions was also observed after same storage period. Especially, in the case of change of fatty acid composition, content of linoleic acid and linolenic acid were reduced after 6 months storage, while those of palmitic acid, stearic acid and oleic acid were increased.

• Korean Journal of Environmental Agriculture
• /
• v.2 no.2
• /
• pp.98-102
• /
• 1983

The hydrogen fluoride gas generated from making the cement hardener injured the plants growing at the neighbour field. This investigation was conducted on sample analysis of hydrogen fluoride gas damage plants which included the ratios of destroyed leaves, damage symptoms, and nutrient elements in paddy rice and weeds. The results obtained were as follows; 1) The ratio of destroyed leaves at near HF source was very high reaching about 95% at 100m, 65% at 500m, 5% at 2㎞, respectively. 2) The necrosis was the characteristic symptom of fluoride injury on rice plant and occurred predominantly at the tip and margins of damage leaf. It developed along the tip and margins of leaves with a dull, gray-green, water soaked discoloration. 3) The fluorine content of tip and margins of damaged rice leaves were 1,600 ppm, 3 to 20 times higher than that of center part and it ranged from 130 to 242.5 ppm in weed leaves, but from 10 to 15 ppm in normal weed leaves. 4) The contents of calcium, potassium, silicon, iron and manganese were higher in tip and margins than in the center of rice damage leaves. 5) The Cocculus trilolous. D.C was the most resistant plant to HF gas than any other plant growing in this site, while wild berry and aralia tree belong to most sensitive plant group.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering. Inc., Troy, USA) and ANSYS (Swanson Analysis Systems. Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Viva dent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition. Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Economic and Environmental Geology
• /
• v.20 no.4
• /
• pp.273-288
• /
• 1987

연화(蓮花) 연(鉛) 아연광산(亞鉛鑛山)은 광체(鑛體)의 분포(分布)에 따라 본산지구(本山地區), 동점지구(銅店地區) 및 태백지구(太白地區)로 구분할 수 있다. 태백지구(太白地區)에 대한 본격적인 탐광(探鑛)이 시작되기 전인 1981년 당시, 약 25년 동안 채광작업(採鑛作業)이 진행되어 온 본산지역(本山地域)은 주종광체(主宗鑛體)인 월암(月岩) 및 남산광체(南山鑛體)가 -600m level에서 하한(下限)이 드러남에 따라 광량(鑛量)이 크게 소진(消盡)된 상태였으며, 동점지성(銅店地城)은 상하(上下)의 광황변화(鑛況變化)는 크지 않으나 광체(鑛體)의 규모(規模)가 비교적 작아, 조업(操業)의 안정(安定)을 위해서는 신광화대(新鑛化帶)의 개발(開發)이 시급(時急)한 과제(課題)로 대두되었다. 이에 따라 평천(平川), 태백(太白), 동점역(銅店驛), 방터골, 삼방산광화대(三芳山鑛化帶) 등 연화(蓮花) 전역(全域)에 걸쳐 모암(母岩)의 분포(分布), 지질구조(地質構造), 광징(鑛徵) 등을 검토한 결과 탐광대상(探鑛對象)에서 제외되어 왔던 태백지구(太白地區)가 다음과 같은 점에서 유망(有望)한 탐사후보지(探査候補地)로 부각되었다. 첫째, 지표(地表)에서는 풍촌석회암층(豊村石灰岩層)이 분포(分布)되지 않으나 지질구조(地質構造)를 검토한 결과 -300m level 하부(下部)에서는 이의 전층(全層)이 분포(分布)할 것으로 예상되며, 둘째, 두무동층(斗務洞層) 및 동점규암층내(銅店珪岩層內)에서 발견된 광징(鑛徵)들이 하부(下部)의 풍촌석회암내(豊村石灰岩內)로 연장(延長)되면 부광부(富鑛部)를 이룰 것으로 기대되고, 셋째, 지층(地層)의 경사(傾斜)가 $50^{\circ}$ 이상(以上)인 점, 석영반암(石英斑岩)이 분포(分布)하는 점 등은 광상배태(鑛床胚胎)에 양호(良好)한 조건(條件)이고, 넷째, 본산지구(本山地區)의 월곡(月谷), 월암(月岩), 남산(南山)등 주종광화대(主宗鑛化帶)의 연장부(延長部)인 점, 다섯째, 중앙견갱(中央堅坑)으로부터 약 2km 거리로 탐사단계(探査段階)에 별도의 신규투자(新規投資) 없이 굴진(掘進)이 가능하다는 개발조건상(開發條件上)의 이점(利點)이 있었다. 이에 따라 태백지구(太白地區)에 대한 지표정사(地表精査), 물리탐사(物理探査) 및 지화탐(地化探)을 실시하고, 20여년간 축적된 연화광산(蓮花鑛山)의 지질(地質), 광상자료(鑛床資料)를 정리(整理), 그 특성(特性)을 태백지구(太白地區) 탐사(探査)의 가설(假說)로 적용하여 시추계획(試錐計劃)을 수립, 1982년 구조시추(構造試錐)를 실시한 결과 지질구조(地質構造), 풍촌석회암층(豊村石灰岩層)의 분포(分布) 등이 거의 예상했던 대로 밝혀졌으며 태백(太白) 1호광체(號鑛體)의 일단(一端)이 확인되기에 이르렀다. 1983년(年) 7월(月) 본산지구(本山地區) -600m level에서 태백(太白) 크로스 탐광굴진(探鑛掘進)이 착수되었으며, 1985년에 마침내 갱내(坑內)에서 태백(太白) 1호(號), 2호(號) 광체(鑛體)가 착광(着鑛)되었다. -600m level에서의 태백(太白) 1호광체(號鑛體)의 규모(規模)는 연장(延長) 300m, 평균맥폭(平均脈幅) 8.5m이며, 품위(品位)는 Pb 4.5%, Zn 4.5%, Ag 109g/t이다. 태백광화대(太白鑛化帶)의 지질학적(地質學的) 예상광량(豫想鑛量)은 1,000만(萬)t 이상(以上)이 될 것으로 추정(推定)되며, 현재 -480m level에서 -720m level에 이르기까지 5개 level에서 가행(稼行)되고 있다. 현재 level에서 태백(太白) 1호(號) 광체(鑛體)는 풍촌석회암층(豊村石灰岩層) 및 화절층(花折層)을 모암(母岩)으로 하여 맥상광상(脈狀鑛床)으로 생산(生産)되며, 맥석광물(脈石鑛物)은 능망간석, Mn-방해석(方解石), 방해석(方解石), 석영(石英) 등이고 광석광물(鑛石鑛物)은 섬아연석(閃亞鉛石), 방연석(方鉛石), 황철석(黃鐵石), 자유철석(磁硫鐵石), 유비광석(硫砒鑛石), 황동석(黃銅石), 사면동석(四面銅石), 엘렉트럼 등이다. 태백지구(太自地區)는 광상(鑛床)의 산출상태(産出狀態) 및 지질(地質), 광상학적(鑛床學的) 환경(環境)이 본산지구(本山地區)와 거의 동일(同一)함이 밝혀지고 있다. 태백지구(太白地區)에서는 현재 태백(太白) 1호(號), 2호(號), 3호(號), 5호(號) 및 절골 1호(號), 2호(號) 등 6개 광화대(鑛化帶)에 대한 탐광(探鑛)이 진행되고 있다.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.4
• /
• pp.351-358
• /
• 2012

BACKGROUND: Constructed wetlands for wastewater treatment are vegetated by wetland plants. Wetland plants are an important component of wetlands, and the plants have several roles in relation to the livestock wastewater treatment processes. The objectives of this study were to investigate the growth characteristics and nutrient absorption of water plants in constructed wetlands for treating livestock wastewater. METHODS AND RESULTS: In this study, livestock wastewater treatment plant by constructed wetlands consisted of $1^{st}$ water plant filtration bed, $2^{nd}$ activated sludge bed, $3^{rd}$ vertical flow(VF), $4^{th}$ horizontal flow(HF) and $5^{th}$ HF beds. Phragmites communis TRINIUS(PHRCO) was transplanted in $3^{rd}$ VF bed, Iris pseudoacorus L(IRIPS) was transplanted in $4^{th}$ HF bed and PHRCO, IRIPS and Typha orientalis PRESEL(THYOR) were transplanted in $5^{th}$ HF. Growth of water plants in constructed wetlands were the highest in October. The IRIPS growth was higher than other plant as 264 g/plant in October. The absorption of nitrogen and phosphorus by IRIS were 3.38 g/plant and 0.634 g/plant, respectively. The absorption of K, Ca, Mg, Na, Fe, Mn, Cu and Zn by water plants were higher in the order of IRIPS > THYOR > PHRCO. CONCLUSION(S): The absorption of nutrients by water plants were higher on the order of IRIPS > THYOR > PHRCO in constructed wetlands for treating livestock wastewater.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.2
• /
• pp.81-88
• /
• 2008

The study was conducted to investigate the effects of DM (dry matter) content and split application of liquid swine manure (LSM) on productivity of rye and subsequent soil quality on the pasture of Livestock Policy Division, Jeju Special Self-Governing Province. The experiment was done between November, 2005 and June 2006, using split plot design. Treatments were 2 main plots (7.0 and 1.6% DM LSM) and 2 subplots (basal fertilizer 100% and basal fertilizer 50%+top dressing 50%). Application of 7.0% DM LSM resulted in significant increase in DM yield and plant length of rye compared with 1.6% DM LSM (p<0.05). Crude protein content of rye was significantly higher in split application(basal fertilizer 50%+ top dressing 50%) than in basal fertilizer 100% (p<0.05). No significant difference in macro and micro mineral contents of rye or in subsequent soil quality was found by application of LSM. Mean P content (0.16%) of rye appeared to be lower than proper P level $(0.2{\sim}0.4%)$ of grass crop. The pH (5.5), OM (13.3%), available $P_2O_5$ (47.6 mg/kg) and Ca (2.75cmole/kg) content of the pasture soil studied were lower, compared with those of cultivated soil. Results show that the application of a 7.5% DM liquid swine manure increases the productivity of rye compared with a 1.6% DM liquid swine manure, meanwhile the property of pasture soil was not influenced by application of LSM.