• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.351-374
• /
• 1996

Various types of garnet compounds were synthsized by iso-and aliovalent substitutions and sintering method. Among them, fiber shapes of garnet crystals were grown from the $Ca_3Li_xNb_{(1.5+x)}Ga_{(3.5-2x)}O_{12}$ melt where x = 0 ~ 0.5 by modified micro-pulling down method in air using Pt crucibles. The measured lattice constants as a function of solidification fraction of grown fiber crystals are about $12.54\;{\AA}$ irrespective of x. It was found that the $Ca_3Li_{0.275}Nb_{1.775}Ga_{2.95}O_{12}$ garnet melts congruently at about $1450\;^{\circ}C$ based on the purities of garnet phase and variations of lattice parameter. Transparent and bubble-free crystals of x = 0.25 and 0.275 were grown by Czochralski techniques in air using Pt crucibles. An absorption spectrum is also reported.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.733-736
• /
• 2001

Instead of a solution technigue producing amorphous LiV$_3$O$_{8}$ form, we prepared Lithium vanadate glass by melting Li$_2$O-P$_2$O$_{5}$-V$_2$O$_{5}$, composition in pt. crucible and by quenching on the copper plate. From the crystallization of Li$_2$O-P$_2$O$_{5}$-V$_2$O$_{5}$, we could abtain crystal phase, LiV$_3$O$_{8}$. The material heat-treated at lower-temperature, 25$0^{\circ}C$ was less crystalline, but had higher capacity. In present paper, we describe eletrochemical properties during crystallization process and find the best crystallization condition of Li$_2$O-P$_2$O$_{5}$-V$_2$O$_{5}$ glass as cathod material.cathod material.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.653-656
• /
• 2009

3-Dimensionally ordered macroporous $LiMn_2O_4$ thin film was prepared by a sol-gel and dip coating method on Pt/Ti/$SiO_2$/Si substrate. An opal structure consisting of mono dispersed polystyrene beads (300 nm) was used as a template. After solution containing Mn and Li precursors was coated on the template-deposited substrate, the template and organic materials in the precursors was removed by calcination at 400 ${^{\circ}C}$. And then the 3-dimensional $LiMn_2O_4$ thin film with spinel structure was fabricated by heat treatment at 700 ${^{\circ}C}$. The structural and electrochemical property was investigated by XRD, SEM and charge-discharge cycler.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.157-159
• /
• 2000

Vanadate glass in the $Li_2O-P_2O_5-V_2O_5$ system with 60mol% $V_2O_5$ was prepared by melting the bath in pt. crucible followed by quenching on the copper plate. We found that $Li_2O-P_2O_5-V_2O_5$ glass ceramics obtained from nucleation of $Li_2O-P_2O_5-V_2O_5$ glass showed significantly higher capacity and longer cycle life than conventionally made crystalline $LiV_3O_8$. In the present paper, We describe the charge/discharge properties during crystallization process and find the best crystallization condition of $Li_2O-P_2O_5-V_2O_5$ glass as cathode material. The Charge and discharge capacity of $Li_2O-P_2O_5-V_2O_5$ glass was about 220mAh/g for the cell heat-treated at $250^{\circ}C$ for 2.5hr.

• 전기화학회지
• /
• 제3권2호
• /
• pp.115-120
• /
• 2000

양극 물질로 산화바나듐 박막, 고체전해질로는 LiPON 박막 그리고 음극 물질로는 리튬 금속 박막을 선택하여 $Li/LiPON/V_2O_5/Pt$ 구조의 전고상 박막 전지를 제작하였고 전지 특성을 평가하였다. 산화바나듐 박막은 여러 산소 분압에서 직류 반응성 스퍼터링으로 증착하여 전기화학적 특성을 분석한 결과 $20\%\;O_2/Ar$비에서 가장 우수한 가역 특성을 나타내었다. 직류 반응성 스퍼터링에 의해 산화바나듐 박막을 제작한 후 진공을 그대로 유지한 상태에서 r.f. 반응성 스퍼터링에 의해 LiPON 고체전해질 박막을 증착하였다. 그 후 dry room내에서 진공 열증착법에 의해 리튬 금속 박막을 증착하여 전고상의 박막 전지를 제작하였다. $Li/LiPON/V_2O_5$ 박막 전지를 전압 범위와 전류 밀도를 변화시켜 충방전 시험을 행한 결과 $7{\mu}A/cm^2$의 전류 밀도와 3.6-2.7 V의 전압범위에서 가장 우수한 가역 특성을 나타내었다. $Li/LiPON/V_2O_5$박막 전지로 초시계를 구동 시켰으며 이는 in-situ공정에 의해 제작된 박막 전지가 소자 에너지원으로의 응용 가능성을 보여 주었다.

• 한국분말재료학회지
• /
• 제8권3호
• /
• pp.163-167
• /
• 2001

A bulk porous $CaZrO_3/MgO$ composite with plantinum nano-dispersion was synthesized in air atmosphere through the combination of several in situ reactions, including the pyrolysis of $PtO_2$. A mixture of $CaMg(CO_3)_2$(dolomite), $ZrO_2$, $PtO_2$ and LiF (0.5 wt%, as an additive) was cold isostatically pressed at 200 MPa and sintered at $1100^{\circ}C$ for 2 h. The porous $CaZrO_3/MgO/Pt$ composite ($CaZrO_3/MgO$ : Pt=99 : 1 in volume) had a uniformly open-porous structure (porosity: 56%) with three-dimensional (3-D) network and a narrow pore-size distribution, similarly to the porous $CaZrO_3/MgO$ composites reported before. Catalytic Properties (viz., NO direct decomposition and NO reduction by $C_2H_4$) of the $CaZrO_3/MgO/Pt$ composite were investigated up to $900^{\circ}C$. In the absence of oxygen, the NO conversion rate reached ~52% for the direct decomposition and ~100% for the reduction by $C_2H_4$, respectively. The results suggest the possibility of the porous composite as a multifunctional filter, i.e., simultaneous hot gas-filtering and $de-NO_x$ in one component.

• 한국세라믹학회지
• /
• 제46권4호
• /
• pp.419-424
• /
• 2009

Congruent or stoichiometric $LiNbO_3$ fiber single crystals were grown by the $\mu$-PD method, and the grown fiber crystals have the several (2 or 3) ridges with a diameter of $1.35{\sim}1.5\;mm$ and a length of $40{\sim}100\;mm$. In this $\mu$-PD process, different growth rates ($10{\sim}60\;mm/h$) were applied. Pt wire or $LiNbO_3$ crystal was used as a seed. The properties of grown $LiNbO_3$ fiber single crystals having a-axis or c-axis according to seeds were effected by the grown conditions(Pt tube diameter, pulling speed, after heater etc.). Disk-type $LiNbO_3$ samples were poled in condition of DC 5 V/cm at 1050, 1075 or $1100^{\circ}C$. XRD, SEM, conoscope image through the polarized microscope, $T_C$ measuring apparatus, optical transmittance measuring instrument are used to identify the properties of $LiNbO_3$.

• 한국세라믹학회지
• /
• 제38권1호
• /
• pp.100-105
• /
• 2001

An all solid-state thin film battery (TFB) was fabricated by growing, undoped and Pt-doped vanadium oxide cathode film ( $V_2$ $O_{5}$ ) on I $n_2$ $O_3$: Sn coated glass, respectively. Room temperature charge-discharge measurements based on Li/Lipon/ $V_2$ $O_{5}$ full-cell structure with a constant current clearly shows that the Pt-doped $V_2$ $O_{5}$ cathode film is superior, in terms of cyclibility. X-ray diffraction (XRD) results indicate that the Pt doping process induces a more random amorphous structure than an undoped $V_2$ $O_{5}$ film. In addition to its modified structure, the Pt-doped $V_2$ $O_{5}$ film has a smoother surface than the undoped sample. Compared to an undoped $V_2$ $O_{5}$ film, the Pt doped $V_2$ $O_{5}$ cathode film has a higher electron conductivity. We hypothesize that the addition of Pt alters electrochemical performance in a manner of making more random amorphous structure and gives an excess electron by replacing the $V^{+5}$. Possible mechanisms are discussed for the observed Pt doping effect on structural and electrochemical properties of vanadium oxide cathode films, which are grown on I $n_2$ $O_3$: Sn coated glass.

• 한국광학회지
• /
• 제14권1호
• /
• pp.38-43
• /
• 2003

$LiNbO_3$의 스트레인광학효과와 ~l.4$\mu\textrm{m}$ 두께 이상으로 증착된 Mo(molybdenum)/Pt(platinum) 금속 박막으로부터 발생되는 압축스트레인을 이용하여 채널 광도파로 제작 공정을 개발하였다. 제작된 광도파로는 단일모드로 관찰되었으며, 삽입 손실이 TE, TM 입사 편광모드 각각에 대해서 6.2, 7.7 dB/cm로 측정되었다. 전극 길이와 간격이 11 mm, 21 $\mu\textrm{m}$인 광변조기를 스트레인광학형 광도파로 구조를 이용하여 제작하였으며, $V_{\pi}$= 16.1 V와 100% 변조 깊이가 1.55$\mu\textrm{m}$ 파장 영역에서 측정되었다. 또한 1$\times$2광 파워 분리기를 제작한 결과 0.63$\mu\textrm{m}$ 파장 영역에서 on/off 특성이 $\pm$25V에서 관찰되었다.

• 한국전기전자재료학회논문지
• /
• 제17권9호
• /
• pp.930-935
• /
• 2004

$({Li}_{0.5}0{La}_{0.5}){TiO}_3$ (LLTO) solid electrolyte was grown on LiCo{O}_2 (LCO) cathode films deposited on $Pt/Ti{O}-2/Si{O}_2/Si$ substrate using pulsed laser deposition for all-solid-state lithium microbattery. LLTO solid electrolyte exhibits an amorphous phase at various deposition temperatures. LLTO films deposited at 10$0^{\circ}C$ showed a clear interrace without any chemical reaction with LCO, and showed an initial discharge capacity of 50 $\mu$Ah/cm$^2$-$\mu$m and capacity retention of 90 % after 100 cycles with Li anode in 1mol$ LiCl{O}_4$ in propylene carbonate (PC). The increase of capacity retention in LLTO/LCO structure than LCO itself was attributed to the structural stability of LCO cathode films by the stacked LLTO. The cells of LLTO/LCO with LLTO grown at $100^{\circ}C$ showed a good cyclic property of 63.6 % after 300 cycles. An amorphous LLTO solid electrolyte is possible for application to solid electrolyte for all-solid-state lithium microbattery.