• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.9
• /
• pp.756-760
• /
• 2007

Flame retardant(FR) properties were investigated with tricredyl phosphate(TCP) and tris(pentafluorophenyl)phosphine(TFPP) as additives for lithium-ion batteries. Thermal stability was improved with additives in $Li/LiNi\frac{1}{3}Mn\frac{1}{3}Co\frac{1}{3}O_2$ cells comparing to non-additive electrolytes. Oxygen evolution reaction of the cathode material was delayed to up $55^{\circ}C$, from $275^{\circ}C\;to\;330^{\circ}C$. Electrolytes with the 1 wt.% additives provided good FR properties while the resonable battery performance is maintained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.300-300
• /
• 2006

일반적으로 PZT계 세라믹스는 높은 결정격자 이방성을 가지고 있으며, 우수한 압전특성을 가지고 있다. 이러한 특성을 보이기 위해서는 높은 온도($1200^{\circ}C$)에서 소결을 해야하기 때문에 PbO의 휘발로 인하여 환경문제가 야기되고 있다. 이러한 문제를 해결하기 위해서 Li, Na같은 액상소결제를 첨가시켜 소결온도를 낮추는 연구를 하고 있다. 본 연구에서는 $Pb(Mn_{1/3}Nb_{2/3})O_3$-PZT세라믹스가 갖는 높은 결정격자 이방성을 유지시키고, 저온소결시 압전 및 유전특성을 향상시키기 위해서 $Pb(Mg_{1/2}W_{1/2})O_3$를 치환시켜 attrition milling 시간에 따른 PWM-PMN-PZT세라믹스의 압전특성을 조사하였다.

• The Korean Journal of Mycology
• /
• v.26 no.1 s.84
• /
• pp.8-15
• /
• 1998

The present research was undertaken to investigate the activity of ligninolytic enzymes and the decolorization capability of some dyes with Irpex zonatus BN2, isolated from nature and identified. For the assay of enzyme activities, the isolate did not produce lignin peroxidase (LiP) and veratryl alcohol oxidase (VAO), but laccase and manganese dependent peroxidase (MnP). While the activity for MnP was low $(61.6\;nmol/mg{\cdot}protein)$, its laccase activity was very high $(1185.9\;nmol/mg{\cdot}protein)$. Moreover, laccase had appeared earlier than MnP. When the isolate was incubated with each dye for 10 days, the decolorization rates of azo dyes, such as orange II, orange G, tropaeolin O and congo red were 98.0%, 97.4%, 99.0% and 95.3%, respectively. In case of heterocyclic dyes, eosin Y, toludine blue, methyl blue and azur B were 97.4 %, 98.7%, 99.9% and 94.0% respectively. Finally the results of triphenylmethane dye such as basic fuchsin, malachite green and crystal violet were 98.5%, 95.7% and 99.4%, respectively. The results suggest that laccase of Irpex zonatus BN2 should be played an important role in the decolorization of the dyes.

• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.359-367
• /
• 1999

CsI(Li) single crystals doped with 0.02, 0.1, 0.2 and 0.3 mole% lithium as an activator were grown by Czochralski method. The lattice structure of grown CsI(Li) single crystal was bcc, its lattice constant was $4.568\;{\AA}$. The absorption edge of CsI(Li) single crystal was 245 nm, and the spectral range of luminescence was $300{\sim}600\;nm$, its maximum luminescence intensity appeared at 425 nm. The energy resolutions of CsI(Li) single crystal doped with 0.2 mole% lithium were 14.5% for $^{137}Cs$(662 keV), 11.4% for $^{54}Mn$(835 keV) and 17.7% and 7.9% for $^{22}Na$(511 keV and 1275 keV), respectively. The relation formula of $\gamma$-ray energy versus energy resolution was ln (FWHM%) = -0.893lnE + 8.456 and energy calibration formula was ${\log}E_r=1.455\;{\log}(ch.)-1.277$. The phosphorescence decay time of CsI(Li) crystal doped with 0.2 mole% lithium was 0.51 s at room temperature, and its time resolution measured by CFT(constant-fraction timing method) was 9.0 ns.

• Economic and Environmental Geology
• /
• v.32 no.3
• /
• pp.247-260
• /
• 1999

Geochermical characteristics of the fluvial sediments deprnding on particle size distribution size were investigated in the respect of majir, minor and rare eath element chemisitry. Ratios of $Al_{2}O_{3}/Na_{2}O$ and $K_{2}O/Na_{2}O$ of the sediments show the homogeneous valus, and partly positive correlation with $SiO_{2}/Al_{2}O_{3}$, respecively. Characteristics of minor element ratios (V/Ni, Cr/V, Ni/Co and Zr/Hf)are within the lower and narrow range. Thesesuggested that sediment sources may be acidic to intermediate granitic rock, and may be explained by simple weathering and sedimentation. With increasing SiO2 contents, concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, CaO and MgO decreased, but those of $K_{2}O$ and $Na_{2}O$ increased, Concentrations of Ba, Be, Cs, Cu, Li, Ni, Sr, V and Zr show comparatively normal negative and some positive trends. Compared with the mean composition of granite, concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, MnO, CaO and MgO in the sediments of the study area were highly enriced. Among some minor and rare earth elements, concentrations of As, Cd, Cu, and V were enriched, but those of Be, Ce, Rb, Sc, Sr and Zn were depleted when compared with average composition of granite. By decreasing of particle size fractions, SiO2, Rb and Sr conterts decreased, but concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, CaO, MgO, $TiO_{2}$, MgO, $P_{2}O_{5}$, Be, Cu, Hf, Pb, V and Zr increased. From the correlations between particle size fractions and element concenreations, some elements of $Fe_{2}O_{3}$, CaO, MgO, $P_{2}O_{5}$, Cu, Ni, Zn and Zr showed typical trends in the secondary contramination sediments. These trends are typically shown under 100 mesh fractions. It indicates that the fraction of minus 100 mesh is the optimum size fraction for geochemical and environmental survey.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.3
• /
• pp.407-415
• /
• 2022

Surface coating of cathodes is an essential process for all-solid-state batteries (ASSBs) based on sulfide electrolytes as it efficiently suppresses interfacial reactions between oxide cathodes and sulfide electrolytes. Based on computational calculations, Li₃PO₄ has been suggested as a promising coating material because of its higher stability with sulfides and its optimal ionic conductivity. However, it has hardly been applied to the coating of ASSBs due to the absence of a suitable coating process, including the selection of source material that is compatible with ASSBs. In this study, polyphosphoric acid (PPA) and (NH₄)₂HPO₄ were used as source materials for preparing a Li₃PO₄ coating for ASSBs, and the properties of the coating layer and coated cathodes were compared. The Li₃PO₄ layer fabricated using the (NH₄)₂HPO₄ source was rough and inhomogeneous, which is not suitable for the protection of the cathodes. Moreover, the water-based coating solution with the (NH₄)₂HPO₄ source can deteriorate the electrochemical performance of high-Ni cathodes that are vulnerable to water. In contrast, when an alcohol-based solvent was used, the PPA source enabled the formation of a thin and homogeneous coating layer on the cathode surface. As a consequence, the ASSBs containing the Li₃PO₄-coated cathode prepared by the PPA source exhibited significantly enhanced discharge and rate capabilities compared to ASSBs containing a pristine cathode or Li₃PO₄-coated cathode prepared by the (NH₄)₂HPO₄ source.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.9
• /
• pp.766-770
• /
• 2007

In this study, in order to develop low temperature sintering ceramics for multilayer piezoelectric actuator, $0.07Pb(Mn_{1/3}Nb_{2/3})O_3-xPb(Ni_{1/3}Nb_{2/3})O_3-(0.93-x)Pb(Zr,Ti)O_3$ ceramics system were fabricated using $Li_2CO_3-Bi_2O_3-CuO$ sintering aids and the specimens were sintered at $930^{\circ}C$. Thereafter, their piezoelectric and dielectric characteristics were investigated according to the amount of PNN substitution. At 9 mol% PNN substitution, density, electromechanical coupling factor ($k_p$), dielectric constant, mechanical quality factor ($Q_m$) and piezoelectric constant ($d_{33}$) showed the optimum value of $7.86g/cm^3$, 0.60, 1640, 1323 and 387 pC/N, respectively. It is considered that these values are suitable for piezoelectric divece application such ad multilayer piezoelectric actuator and ultrasonic vibrator with pure Ag internal electrode.

• Journal of Electrochemical Science and Technology
• /
• v.7 no.2
• /
• pp.179-184
• /
• 2016

The interface between the surface of a cathode material and the electrolyte gives rise to surface reactions such as solid electrolyte interface (SEI) and chemical side reactions. These reactions lead to increased surface resistance and charge transfer resistance. It is consequently necessary to improve the electrochemical characteristics by suppressing these reactions. In order to suppress unnecessary surface reactions, we coated cathode material using polypropylene (PP). The PP coating layer effectively reduced the SEI film that is generated after a 4.3 V initial charging process. By mitigating the formation of the SEI film, the PP-coated Li[(Ni_0.6Co_0.1Mn_0.3)_0.36(Ni_0.80Co_0.15Al0.05)_0.64)]O₂(NCS) electrode provided enhanced transport of Li⁺ ions due to reduced SEI resistance (R_SEI) and charge transfer resistance (R_ct). The initial charge and discharge efficiency of the PP-coated NCS electrode was 96.2 % at a current density of 17 mA/g in a voltage range of 3.0 ~ 4.3 V, whereas the efficiency of the NCS electrode was only 94.7 %. The presence of the protective PP layer on the cathode improved the thermal stability by reducing the generated heat, and this was confirmed via DSC analysis by an increased exothermic peak.

• Journal of Magnetics
• /
• v.17 no.4
• /
• pp.255-260
• /
• 2012

In this study, we determine that the electron paramagnetic resonance line-width (EPRLW) is axially symmetric about the c-axis and analyze the spin Hamiltonian with an isotopic g-factor of 1.9920 at a frequency of 9.5 GHz. It should be noted that the electron paramagnetic resonance signals are Lorentzian. Our findings show that the EPRLW decreases exponentially with an increase in the temperature; i.e., its temperature dependence in the range 300-400 K obeys Arrhenius behavior, this kind of temperature dependence indicates an off-center a motional narrowing of the spectrum when $Mn^{2+}$ impurity ions substitute for $Nb^{5+}$ ions. The specific heats follow a linear dependence suggesting a simple Debye $T^3$ behavior.

• Economic and Environmental Geology
• /
• v.40 no.6
• /
• pp.727-738
• /
• 2007

The present study investigation the geochemical characteristics of the stream sediments in the Unbong area was conducted to enable a understanding the natural background and a prediction the prospects of geochemical disaster as a result of that bed rocks(mylonitic granites, Kim et al., 1992). We systematically collected seventy three stream sediments samples by wet sieving along the primary channels. Major, trace and rare earth element(REE) concentrations, combined with mineralogical characteristics, were determined by XRD, XRF, ICP-AES and NAA analysis methods. Major element concentrations for the stream sediments in the Unbong area were $SiO_2\;36.94{\sim}65.39wt.%,\;Al_2O_3\;10.15{\sim}21.77wt.%,\;Fe_2O_3\;3.17{\sim}10.90wt.%,\;CaO\;0.55{\sim}5.27wt.%,\;MgO\;0.52{\sim}4.94wt.%,\;K_2O\;1.38{\sim}4.54wt.%,\;Na_2O\;0.49{\sim}3.36wt.%,\;TiO_2\;0.39{\sim}1.27wt.%,\;MnO\;0.04{\sim}0.22wt.%,\;P_2O_5\;0.08{\sim}0.54wt.%$. Trace and REE concentrations for the stream sediments were $Cu\;4.8{\sim}134ppm,\;Pb\;24.2{\sim}82.5ppm,\;Sr\;95.9{\sim}739ppm,\;V\;19.9{\sim}124ppm,\;Zr\;52.9{\sim}145ppm,\;Li\;25.2{\sim}3.3ppm,\;Co\;3.87{\sim}50.0ppm,\;Cr\;17.4{\sim}234ppm,\;Hf\;3.93{\sim}25.2ppm,\;Sc\;4.60{\sim}20.6ppm,\;Th\;3.82{\sim}36.9ppm,\;Ce\;45.7{\sim}243ppm,\;Eu\;0.89{\sim}2.69ppm,\;Yb\;1.42{\sim}5.18ppm$. According to the comparison of average major element concentrations, CaO, $Na_2O\;and\;K_2O$ contents are higher in stream sediments than in bed rocks(mylonitic granites, Kim et al., 1992) $Al_2O_3\;and\;SiO_2$ contents show good correlation both stream sediments and bed rocks(mylonitic granites, Kim et al., 1992). Yb and Eu in the stream sediments show a positive correlation with $SiO_2$. In contrast, the stream sediments display a negative correlation.