• 한국세라믹학회지
• /
• 제44권3호
• /
• pp.137-141
• /
• 2007

$La_{2}O_{3}-TiO_{2}-SiO_{2}$ glass, a type that could not obtained so far by the conventional melting method, was prepared successfully using a sol gel process. Glass derived with the sol-gel process has compositions of $5La_{2}O_{3}-5TiO_{2}-90SiO_{2},\;5La_{2}O_{3}-10TiO_{2}-85SiO_{2}$, and $5La_{2}O_{3}-20TiO_{2}75SiO_{2}$. The UV-visible absorption edge of all glass compositions was below 400 nm. The measured density is in the range of 2.55-2.89, and was nearly identical to the calculated density and the refractive index of the glasses derived from the sol-gel ranges from 1.545 to 1.645. The molar additive coefficient of $TiO_{2}$ measured in this ternary system is lower than the calculated value, while the value of $La_{2}O_{3}$ is higher.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.330-330
• /
• 2010

이동통신 시스템의 소형화, 경량화, 다기능화 추세에 따라 이동통신 부품도 단위 부피당 소자의 집적도를 증가시키기 위하여 고집적화 추세로 급진전되고 있다. 이에 따라 세라믹 공정 기술도 고집적 추세로 다층화 되고 있어 수동소자의 내장화에 대한 필요성이 증대되고 있다. 이를 위하여 다양한 유전율 대역의 이종소재간 접합을 시도하지만 de-lamination, 내부 crack 등의 결함들이 발생하므로 열팽창계수 조절이 용이한 동종의 글라스를 사용하는 것이 유용하다. 본 연구에서는 공통의 글라스를 개발한 후 다양한 필러들을 혼합하여 mm파 대역에서 다양한 유전율을 갖는 LTCC 소재를 개발함으로써, 수동소자의 내장화에 따른 이종접합시의 매칭성을 극대화하고자 하였다. 이를 위하여 CaO-$Al_2O_3-SiO_2-B_2O_3$계 공통글라스에 $CaZrO_3$, $1.3MgTiO_3$, $2La_2O_3TiO_2$ 필러를 혼합하여 소결체의 미세구조, 유전특성 및 열기계적 특성을 고찰하였다. 이때 유전율 6에서 20에 이르는 저손실 소재를 개발할 수 있었다.

• 반도체디스플레이기술학회지
• /
• 제21권3호
• /
• pp.57-62
• /
• 2022

The plasma resistance of multi-component glasses containing La, Gd, Ti, Zn, Y, Zr, Nb, and Ta was analyzed in this study. The plasma etching was performed via inductively coupled plasma-reactive ion etching (ICP-RIE) using CF₄/O₂/Ar mixed gas. After the reaction, the glass with a low fluoride sublimation temperature and high content of P, Si, and Ti elements showed a high etching rate. On the other hand, the glass containing a high fluoride sublimation temperature component such as Ca, La, Gd, Y, and Zr exhibited high plasma resistance because the etch rate was lower than that of sapphire. Glass with low plasma resistance increased surface roughness after etching or nanoholes were formed on the surface, but glass with high plasma resistance showed little change in surface microstructure. Thus, the results of this study demonstrate the potential for the development of plasma-resistant glasses (PRGs) with other compositions besides alumino-silicate glasses, which are conventionally referred to as plasma-resistant glasses.

• 분석과학
• /
• 제9권4호
• /
• pp.382-391
• /
• 1996

세라믹스 분야, 전자요업 분야 등에서 폭넓게 사용되고 있는 티탄산바륨 소재에 대하여 신속하고 정확하게 분석할 수 있는 X-선 형광분석용 표준물질 12종을 제작하였다. 특히 매질효과 제거, 보관성, 균질성 등을 고려하면서 융제 ($Li_2B_4O_7+LiBO_2$)로 시료를 16배 희석하여 제작 하였다. 티타늄을 비롯한 몇 원소는 매트릭스의 영향을 받는 것으로 보여 실험 계수법을 사용하고 Lucas Tooth와 Price의 식을 이용해 매트릭스의 영향을 보정해 주었다. 세 곳의 분석기관에서 X-선 형광분광기로 12개의 표준물질에 포함된 15 원소에 대하여 검정곡선을 작성해 본 결과 BaO, PbO, SrO, $Fe_2O_3$, $La_2O_3$, $SnO_2$, ZnO, $ZrO_2$, CaO들은 correlation factor가 0.995를 넘는 아주 좋은 곡선을 얻었다. $SiO_2$와 $Al_2O_3$는 X-선 형광세기도 약하고 correlation factor가 낮은 검정 곡선을 보였다.

• Transactions on Electrical and Electronic Materials
• /
• 제1권1호
• /
• pp.17-21
• /
• 2000

In order to investigate the dependence of a content in lead lanthanum titanate (PLT) films and heat treatment, sol-gel process has been used. Four types of PLT thin films with the chemical formula, Pb$\_$1-x/ La$\_$x/Ti$\_$1-x/4/O$_3$(X=18, 21, 24 and 28 mole %) have been fabricated on Pt/Ti/SiO$_2$/Si multi-layers and ITO/glass substrates, The post-annealing temperature in the range of 400~700 $\^{C}$ is applied for the formation of perovskite structure in PLT films. The structureal, electrical and optical properties of PLT film with the addition of La content are estimated. The films orientation and surface structure of films are studied by XRD (X-ray diffraction) and SEM(scanning electron microscopy). The P-E hysteresis loop become narrower with increasing La content. The average transmittance of the films is about 80%.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1061-1070
• /
• 2023

Over the last few years, lead-free inorganic metal perovskites have gained impressive ground in empowering satellites in space exploration owing to their material stability and performance evolution under extreme space environments. The present work has examined the versatility of eight such perovskites as space radiation shielding materials by computing their photon, charged particles and neutron interaction parameters. Photon interaction parameters were calculated for a wide energy range using PAGEX software. The ranges of heavy charged particles (H, He, C, N, O, Ne, Mg, Si and Fe ions) in these perovskites were estimated using SRIM software in the energy range 1 keV-10 GeV, and that of electrons was computed using ESTAR NIST software in the energy range 0.01 MeV-1 GeV. Further, the macroscopic fast neutron removal cross-sections were also calculated to estimate the neutron shielding efficiencies. The examined shielding parameters of the perovskites varied depending on the radiation type and energy. Among the selected perovskites, Cs₂TiI₆ and Ba₂AgIO₆ displayed superior photon attenuation properties. A 3.5 cm thick Ba₂AgIO₆-based shield could reduce the incident radiation intensity to half its initial value, a thickness even lesser than that of Pb-glass. Besides, CsSnBr₃ and La_0.8Ca_0.2Ni_0.5Ti_0.5O₃ displayed the highest and lowest range values, respectively, for all heavy charged particles. Ba₂AgIO₆ showed electron stopping power (on par with Kovar) better than that of other examined materials. Interestingly, La_0.8Ca_0.2Ni_0.5Ti_0.5O₃ demonstrated neutron removal cross-section values greater than that of standard neutron shielding materials - aluminium and polyethylene. On the whole, the present study not only demonstrates the employment prospects of eco-friendly perovskites for shielding space radiations but also suggests future prospects for research in this direction.