• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2004년도 춘계총회 및 연구발표회 초록집
• /
• pp.31.4-31.4
• /
• 2004

• 한국세라믹학회지
• /
• 제38권1호
• /
• pp.45-51
• /
• 2001

고체산화물 연료전지의 삼상 계면의 길이를 증가시키기 위해 Glycine-Nitrate Process(GNP)를 이용하여 환원극 재료인 L $a_{0.5}$S $r_{0.5}$Mn $O_3$(LSM)과 전해질 재료인 C $e_{0.8}$G $d_{0.2}$ $O_{1.9}$(CGO)를 합성하였다. 적당한 합성조건을 찾기 위하여 글리신의 양을 달리하여 분말을 합성한 결과 LSM의 경우 글리신이 양이온 몰수의 2배일 때 perovskite상이 얻어졌으며 비표면적은 34$m^2$/g 이었다. 합성된 LSM과 CGO 분말을 50:50 wt%로 혼합하여 제작된 환원극을 screen-printing법으로 코팅한 후 각각 1200, 1300, 1350 및 140$0^{\circ}C$에서 4시간 동안 소결한 후 80$0^{\circ}C$에서 power density와 양극과전압 등을 측정한 결과 130$0^{\circ}C$에서 소결한 단위전지에서 최대 309 mW/$ extrm{cm}^2$의 power density를 얻을 수 있었다.다.

• 한국세라믹학회지
• /
• 제35권9호
• /
• pp.917-922
• /
• 1998

YSZ와 계면반응하지 않는 ${(La_{0.75}Sr_{0.25})}_{0.95}Mn_{0.8 }Co_{0.2}O_3$에 전해질 물질인 YSZ를 첨가하여 양극의 분극특성을 고찰하였다. LSMC에 YSZ를 첨가함에 따라 삼상계면(Three Phase Boundary)이 증가하고, 분극저항이 감소하여 60 : 40wt% 비에서 최소값을 나타내었다. LSMC-YSZ composite 전극은 $1200^{\circ}C$ 에서 소결하여 최소의 분극저항을 나타내었고, 정전용량의 값은 소결온도의 증가에 따라 증가하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.368-371
• /
• 2006

[ $La_{0.8}Sr_{0.2}Co_{1-x}Mn_xO_3$ ] cathode as a high performance cathode on YSZ electrolyte was studied by analyzing impedance spectra. It was shown that cathode property of $La_{0.8}Sr_{0.2}Co_{1-x}Mn_xO_3$ is bet ter than that of$La_{0.8}Sr_{0.2}CoO_3$. At $700^{\circ}C$ in air environment, $La_{0.8}Sr_{0.2}Co_{0.4}Mn_{0.6}O_3$ cathode on CGO- layered YSZ electrolyte showed very low area specific resistance of $0.14{\Omega}cm^2$, which is low enough for intermediate-temperature sol id oxide fuel cells. This is because material properties of ionic conductivity and thermal expansion compatibility with electrolyte were optimized. Judging from activation energy and oxygen part i al pressure dependance of cathode property, it was noted that oxygen surface exchange kinetics is dominantly influential on cathode property in higher temperature region than $700^{\circ}C$ and oxygen self-diffusion in cathode material is more influential in lower temperature region.

• 한국전기전자재료학회논문지
• /
• 제11권1호
• /
• pp.18-25
• /
• 1998

G $d_{0.2}$C $e_{0.8}$ $O_{1.9}$(CGO) for electrolyte and L $a_{0.5}$S $r_{0.5}$Mn $O_3$(LSM50) for cathode in Solid Oxide Fuel Cells(SOFC) were synthesized by citrate process. Specimens were prepared with sintering temperatures at 110$0^{\circ}C$, 120$0^{\circ}C$ and 130$0^{\circ}C$, which were fabricated by slurry coating with citric acid contents. Interfacial resistance was measured between cathode and electrolyte using AC-impedance analyzer. With various citric acid content, the degree of agglomeration for the initial particles changed. Also sintering temperature changed the particle size and the degree of densification of cathode. Factors affecting the interfacial resistance were adherent degree of the electrolyte and cathode, distribution of TPB(three phase boundaries, TPB i.e., electrolyte/electrode/gas phase area) and porosity of cathode. By increasing the sintering temperature, particle size and densification of the cathode were increased. And then, TPB area which occurs catalytic reaction was reduced and so interfacial resistance was increased.sed.sed.d.

• 한국전기전자재료학회논문지
• /
• 제35권3호
• /
• pp.292-296
• /
• 2022

(La_0.5Nd_0.2Sr_0.3)MnO₃ specimens were prepared by a solid-state reaction. In all specimens, X-ray diffraction patterns of an orthorhombic structure were shown. The fracture surfaces of (La_0.5Nd_0.2Sr_0.3)MnO₃ specimens showed a transgranular fracture pattern be possibly due to La ions (0.122 nm) as a perovskite A-site dopant substituting for Nd ions (0.115 nm) having a small ionic radius. The full-width at half maximum (FWHM) of the Mn 2p XPS spectra showed a value greater than that [8] of the single valence state, which is believed to be due to the overlapping of Mn²⁺, Mn³⁺, and Mn⁴⁺ ions. The dependence of Mn 2p spectra on the Mn³⁺/Mn⁴⁺ ratio according to sintering time was not observed. Electrical resistivity resulted in the minimum value of 100.7 Ω-cm for the specimen sintered for 9 hours. All specimens show a typical negative temperature coefficient of resistance (NTCR) characteristics. In the 9-hour sintered specimen, TCR, activation energy, and B25/65-value were -1.24%/℃, 0.19 eV, and 2,445 K, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2004년도 제26회 학술발표회 초록집
• /
• pp.73-73
• /
• 2004

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.185-188
• /
• 1999

Biepitaxial Y$_1Ba_2Cu_3O_{7-x}$ (YBCO) and La$_{0.2}Sr_{0.8}MnO_3$ (LSMO) thin films have been prepared on SrTiO$_3$ buffer layer and MgO seed layer grown on Al$_2O_3$(11${\bar{2}}$0)substrates by dc-sputtering with hollow cylindrical targets, respectively. We charaterized Josephson properties and significantly large magnetoresistance in YBCO and LSMO films with 45$^{\circ}$ grain boundary junction, respectively. The observed working voltage (I$_cR_n$) at 77 K in grain boundary junction was below 10${\mu}$V, which is typical I$_cR_n$ value of single biepitaxial Josephson junction. The field magnetoresistance ratio (MR) of LSMO grain boundary juncoon at 77K was enhanced to 13%, which it was significant MR value with high magnetic field sensitivity at a low field of 250 Oe. These results indicate that inserting the insulating layer instead of the grain boundary layer with metallic phase can be possible to apply a new SIS Josephson junction and a novel magnetic device using spin-polarized tunneling junction.

• 공업화학
• /
• 제7권1호
• /
• pp.9-17
• /
• 1996

고체전해질형 연료전지용 전해질로 사용되는 8mol% YSZ($Y_2O_3$ stabilized zirconia)의 소결조건을 변화시켜 이온전도도를 측정하였다. 그 결과 소결조건이 $1400^{\circ}C$, 10시간이었을 때 가장 높은 값인 $10^{-1}S.cm^{-1}$를 나타내었다. 또한 산소극재료로서 $La_{1-x}Sr_xMnO_3$($0{\leq}{\times}{\leq}1$)를 고상반응법으로 제조하여 과전압, 전자 전도도, 전해질인 YSZ와의 계면저항등을 살펴보았다. 그 결과 La에 대한 Sr의 치환량이 50mol%일 때 가장 우수한 특성을 나타내었다.

• 한국세라믹학회지
• /
• 제36권2호
• /
• pp.145-150
• /
• 1999

고체산화물 연료전지의 양극재료로서 Gd1-xSrxMnO3을 구연산법으로 합성하였으며, 이의 결정구조, 전기전도도 및 열팽창률을 조사하였다. 또한 합성한 Gd1-xSrxMnO3을 8mol% yttria stabilized zirconia(8YSZ) 혹은 Ce0.8Gd0.2O1.9(CGO) 전해질과의 반응성을 조사하였다. Gd1-xSrxMnO3의 결정구조는 Sr함량이 증가함에 따라 orthorhombic (0$\leq$X$\leq$0.3)에서 cubic(0.4$\leq$X$\leq$0.5)을 거쳐 tetragonal (X=0.6)로 변하였다. Sr 함량이 증가함에 따라 Gd1-xSrxMnO3의 전기전도도는 증가하였다. 열팽창률은 Sr 함량이 30mol% 이상인 경우 함량이 증가함에 따라 증가하는 경향을 보이는 8YSZ, CGO와 비슷한 거동을 보였다. 8YSZ 및 CGO와의 반응성을 보기 위하여 Gd1-xSrxMnO3과 이들을 각각 혼합하여 130$0^{\circ}C$에서 48시간 동안 열처리했을 경우 8YSZ와는 SrZrO3의 반응물을 형성하였으나 CGO와는 반응을 하지 않았다.