• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.180.1-180
• /
• 2000

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권8호
• /
• pp.894-900
• /
• 2006

The electrical characteristics associated with crystal structure changes as a function of La content for $(Pb_{1-x}La_x)(Zr_{0.5}Ti_{0.5})O_3$ thin films were investigated for applications in memory capacitors. Tetragonality of PLZT films decreased with increasing La content. Thin films with La $\geq$ 20 mol% were found to be cubic. Films with La $\geq$ 12 mol% exhibited broader dielectric peaks compared to those of bulk ceramics and behaved as relaxer ferroelectrics. Tetragonal PLZT film with 12 mol% La had a dielectric constant maximum of 1330 at room temperature and a charge storage density of ${\sim}18{\mu}C/cm^2$ at 5 V. Decrease in coercive field and remnant polarization with increase in La content were resulting from less dipolar response caused by the decreased crystal anisotropy. The leakage current densities $<10^{-8}A/cm^2$ up to 5 V bias voltage were observed for the films with La $\geq$ 14 mol%.

• 한국재료학회지
• /
• 제11권6호
• /
• pp.460-464
• /
• 2001

Pechini방법으로 제조한 La$_{0.8}$Ca$_{0.2}$CrO$_3$CLC소결체와 La$_{0.8}$Ca$_{0.2}$CrO$_3$CLC-Green체를 YSZ에 적층한 후 온도의 함수로 계면에서의 미세구조와 성분이동 등의 거동을 고찰하였다. CLC-G/CLC와 CLC/YSZ계면에서의 CLC면은 반응온도에 상관없이 XRD 관찰에서 주상은 La$_{1-x}$ Ca$_{x}$CrO$_3$그리고 CLC와 반응하지 않은 YSZ면의 결정 상은 cubic-ZrO$_2$으로 각각 나타났다. CLC/YSZ반응 계면의 성분이동은 Zr > La>>Cr>>>Ca 순이었으며, 온도에 따른 개개 성분의 이동도 차이는 크지 않았다. CLC/YSZ계면간의 결합은 계면성분간의 과다한 성분이동 없이 현 연구의 온도전체에 걸쳐 가능한 것으로 나타났다. CLC-G/CLC간의 SEM미세구조는 결합 면을 경계로 저온에서는 결정의 입자크기 차이를 보이다가 온도가 증가할수록 균일화되는 경향을 보였다.였다. 보였다.였다.

• 한국결정성장학회지
• /
• 제12권4호
• /
• pp.178-183
• /
• 2002

용매제로서 polypropanediol을 사용한 sol-gel법으로, La의 함량을 1, 2, 5, 7 ㏖%로 변화시킨 PLZT(x/50/50) 박막을 제조하고 La 함량에 따른 유전특성의 변화를 연구하였다. 제조한 sol을 사용하여 $Pt/Ti/SiO_2$/Si 위에 10회 코팅한 후, 560~$600^{\circ}C$까지 10분간 열처리하여 600nm 두께의 박막을 얻을 수 있었다 $560^{\circ}C$ 이상에서는 조성에 관계없이 perovskite 단일 상만이 나타났고, La 함량이 증가함에 따라 입자 크기가 증가하였다. 모든 조성의 박막에서 열처리 온도가 증가함에 따라 유전상수 및 잔류분극 값이 증가되었으며 $600^{\circ}C$에서 열처리한 박막이 가장 우수한 유전 특성을 나타내었다. $600^{\circ}C$에서 열처리한 박막에서 La함량이 증가함에 따라 잔류분극, 항전계, 유전상수 모두 감소하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.799-801
• /
• 1988

This paper was studied on the effects of Ca-La-Nb substitution and Zr/Ti ratio variation to Pb(Zr, Ti)$O_3$ system on structural, electrical, optical and sound level characteristics in order to develope the piezoelectric and electrooptic ceramic devices. Also the specimens were prepared by the two stage sintering technique. The molecular formular was X($CaO{\cdot}1/4La_{2}O_{3}{\cdot}1/4Nb_{2}O_{5}){\cdot}(1-X)Pb(Zr_{Y}Ti_{1-Y})O_{3}$(x=100X, y=100Y), and the variation of x was $6{\sim}12$, y was 60${\sim}$49 and second stage sintering time was 20${\sim}$40 hours. The experimental results obtained from this study are as follows : 1. The density was decreased, the grain size was increased according to increase of Ca-La-Nb substitution. 2. The crystal structure was rhombohedral in composition 6/60/40, and the crystal structure was tetragonal and cubic according to increase of Ca-La-Nb substitution. 3. The Ca substitution of PZT system enhanced the sintering property. The Pb site vacancy resulting from the substitution of La-Nb increased the dielectrical constant, the piezoelectric charge constant, the dielectric loss and decreased the coercive field. 4. The resistivity of PZT system which has the P type conduction mechanism increased according to substitution of La-Nb because of the substituent acting as donor. 5. The PZT ceramics varied from ferroelectric substance according to increase of Ca-La-Nb substituent. The coercive field and saturation remanent polarization decreased, and at last straight line according to increase of La-Nb substitution. 6. The amount of Ca-La-Nb substitution to improve the light transmittance of speciment was 10 mol%, the Zr/Ti ratio was 49/51, and the second stage sintering time was 40 hours. 7. According to Ca-La-Nb substitution, the specimens was to be transparent. The 7.5/51/49 specimen was suitable for transparent sound vibrator because it had 58% light transmittance (thick 0.2[mm], wave length 700[mm]) and 48% electromechanical coupling factor.

• Bulletin of the Korean Chemical Society
• /
• 제27권6호
• /
• pp.821-829
• /
• 2006

A series of catalysts, $NiO/La_2O_3-ZrO_2/WO_3$, for acid catalysis was prepared by the precipitation and impregnation methods. For the $NiO/La_2O_3-ZrO_2/WO_3$ samples, no diffraction lines of nickel oxide were observed, indicating good dispersion of nickel oxide on the catalyst surface. The catalyst was amorphous to X-ray diffraction up to 300 ${^{\circ}C}$ of calcination temperature, but the tetragonal phase of $ZrO_2$ and monoclinic phase of $WO_3$ by the calcination temperatures from 400 ${^{\circ}C}$ to 700 ${^{\circ}C}$ were observed. The role of $La_2O_3$ in the catalyst was to form a thermally stable solid solution with zirconia and consequently to give high surface area and acidity. The high acid strength and high acidity were responsible for the W=O bond nature of complex formed by the modification of $ZrO_2$ with $WO_3$. For 2-propanol dehydration the catalyst calcined at 400 ${^{\circ}C}$ exhibited the highest catalytic activity, while for cumene dealkylation the catalyst calcined at 600 ${^{\circ}C}$ showed the highest catalytic activity. 25-$NiO/5-La_2O_3-ZrO_2/15-WO_3$ exhibited maximum catalytic activities for two reactions due to the effects of $WO_3$ modifying and $La_2O_3$ doping.

• The Korean Journal of Ceramics
• /
• 제3권4호
• /
• pp.253-256
• /
• 1997

Epitaxially grown Pb(Zr, Ti)O$_3$thin films were prepared on LaAlO$_3$substrates by the dipping pyrolysis process using metal naphthenates as starting materials Homogeneous Pb-Zr-Ti solutions with toluene were spin-coated onto the substrates and pyrolyzed at 50$0^{\circ}C$ Highly oriented Pb(Zr, Ti)O$_3$films confirmed by X-ray diffraction $\theta$-2$\theta$ scans were obtained by heat-treated at 75$0^{\circ}C$ in air The X-ray pole-figure analysis and reciprocal-space mapping of the resulting 0.6$\mu\textrm{m}$ films showed that the thin films comprising the c-axis oriented tetragonal phase have an epitaxial relationship with the LaAlO$_3$substrates.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.53.1-53.1
• /
• 2000

• 한국재료학회지
• /
• 제33권11호
• /
• pp.465-474
• /
• 2023

The effects of La³⁺ substitution for Sr²⁺-site on the crystal structure and the dielectric properties of (Ba_0.7Sr_0.3-3x/2La_x) (Ti_0.9Zr_0.1)O₃ (BSLTZ) (0.005 ≤ x ≤ 0.02) ceramics were investigated. The structural characteristics of the BSLTZ ceramics were quantitatively evaluated using the Rietveld refinement method from X-ray diffraction (XRD) data. For the specimens sintered at 1,550 ℃ for 6 h, a single phase with a perovskite structure and homogeneous microstructure were observed for the entire range of compositions. With increasing La³⁺ substitution (x), the unit cell volume decreased because the ionic size of La³⁺ (1.36 Å) ions is smaller than that of Sr²⁺ (1.44 Å) ions. With increasing La³⁺ substitution (x), the tetragonal phase fraction increased due to the A-site cation size mismatch effect. Dielectric constant (ε_r) increased with the La³⁺ substitution (x) due to the increase in tetragonality (c/a) and the average B-site bond valence of the ABO₃ perovskite. The BSLTZ ceramics showed a higher dielectric loss due to the smaller grain size than that of (Ba_0.7Sr_0.3)(Ti_0.9Zr_0.1)O₃ ceramics. BSLTZ (x = 0.02) ceramics met the X7R specification proposed by the Electronic Industries Association (EIA).

• 한국분말재료학회지
• /
• 제20권6호
• /
• pp.453-459
• /
• 2013

Lanthanum/gadolinium zirconate coatings are deposited via suspension plasma spray with suspensions fabricated by a planetary mill and compared with hot-pressed samples via solid-state reaction. With increase in processing time of the planetary mill, the mean size and BET surface area change rapidly in the case of lanthanum oxide powder. By using suspensions of planetary-milled mixture between lanthanum or gadolinium oxide and nano zirconia, dense thick coatings with fully-developed pyrochlore phases are obtained. The possibilities of these SPS-prepared coatings for TBC application are also discussed.