• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.11a
• /
• pp.138-138
• /
• 2001

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.05a
• /
• pp.124-125
• /
• 2000

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.1
• /
• pp.46-51
• /
• 2007

LSM powder material for an oxygen-electrode(anode) of High Temperature Steam Electrolysis (RISE) was synthesized by a Modified-Glycine nitrate process(GNP). Amount of nitric acid and its concentration was varied to find out an appropriate composition for the oxygen-electrode(anode). In order to optimize the amount of Glycine used as an oxidant of self-combustion process, the ratio of Glycine to Anion was varied. $La_{0.8}Sr_{0.2}MnO_3$, $La_{0.5}Sr_{0.5}MnO_3$, and $La_{0.2}Sr_{0.8}MnO_3$ were synthesized in this study. Those LSM were dried for overnight to remove moisture from the material at $110^{\circ}C$ and were calcined 2 hours at $650^{\circ}C$ and were sintered in a furnace for 5 hours at $1400^{\circ}C$. Their structures, surface morphologies, surface areas, and weight changes were investigated with XRD, SEM, BET, and TG/DTA. The best perovskite phase for the oxygen-electrode of HTSE was obtained with $La_{0.8}Sr_{0.2}MnO_3$ formula in which 100 ml of 3M nitric acid was used in the preparation of its formula. The optimized ratio of Glycine to Anion was 2.

• Clean Technology
• /
• v.18 no.3
• /
• pp.259-264
• /
• 2012

Perovskite-type oxides were successfully prepared using malic acid method, characterized by TG/DTA, XRD, XPS, TEM and $H_2$-TPR and their catalytic activities for the combustion of benzene were determined. Almost of catalyst showed perovskite crystalline phase and 15-70 nm particle size. The $LaMnO_3$ catalysts showed the highest activity and the conversion reaches almost 100% at $350^{\circ}C$. The catalysts were modified to enhance the activity through substitution of metal into the A or B site of the perovskite oxides. In the $LaMnO_3$-type catalyst, the partial substitution of Sr into site the A-site enhanced the catalytic activity in the benzene combustion. In addition, the partial substitution of Co or Cu into site the B-site also enhanced the catalytic activity and the catalytic activity was in the order of Co > Cu > Fe in the $LaMn_{1-x}B_xO_3$ (B = Co, Fe, Cu) type catalyst.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.351-352
• /
• 2009

이중의 망간 페로브스카이트 블록을 가진 Ruddlesden-Popper 상 (R-P phase) $Sr_3Mn_2O_7$은 공기중에서 불안정하다. 본 연구에서는 Sr이온 자리에 La, Ca이온을 치환함으로써 R-P상을 안정화 시켰으며, 이들의 결정구조는 Neutron Diffraction 데이터를 이용하여 Rietveld 법으로 정밀화하였다 $La_{1.4}Sr_{0.8}Ca_{0.8}Mn_2O_7$, $La_{1.2}Sr_{0.9}Ca_{0.9}Mn_2O_7$은 $T_N$이 80K이며 25K에서 spin-glass 변이가 관찰되었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.245-250
• /
• 1999

The effect of cation substitution on the inonic conductivity was studied in $(Li_{0.5}La_{0.5})_{1-y}Sr_yTi_{1-x}Mn_xO_3$ system. In case of Sr substitution, the ionic conductivity abrubtly decreased over y=0.05. This may be caused by the decrease of lithium contents which contribute to lithium inonic conductivity. Jahn-Teller distortion as well as lattice parameter variation influenced the inonic conductivity in case of Mn substitution. A and B-site cations effects on the conductivities were found to be independent, and the ionic conductivity as high as $2.8{\times}10^{-2}$S/cm was obtained in x=0.0006 and y=0.05.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.404-409
• /
• 2016

Thermal Characteristics and kinetic parameters of $LaMnO_3$ synthesis reaction were investigated by means of TGA (Thermogravimetric analysis) at non-isothermal heating conditions (5.0, 10.0, 15.0 and 20.0 K/min). The reaction was occurred rapidly at 450~600K (X=0.4~0.7) depending on the heating rate. Activation energy for the synthesis of $LaMnO_3$ from the precursor, which was determined by different method such as Friedman, Ozawa-Flynn-Wall and Vyazovkin methods, was in the range of 23~243 kJ/g-mol depending on the fractional conversion level and estimation method. The reaction order decreased with increasing heating rate and fractional conversional level. The average reaction order was 4.50 in case of X=0.1~0.3, while it was 1.87 in case of X=0.7~0.9, respectively. The value of frequency factor of reaction rate increased with inceasing heating rate and fractional conversion level. The aveage value of frequency factor was 205.6 ($min^{-1}$) when X=0.1~0.3, while it was 475.2 ($min^{-1}$) when X=0.7~0.9, respectively.

• Journal of the Korean Magnetics Society
• /
• v.11 no.6
• /
• pp.267-271
• /
• 2001

These experiments were carried out to examine the effects of elemental substitution of Mn and La-Mn on Sr-ferrite. The calcined properties for the Mn and La-Mn substitution were examined, and the sintered magnetic properties were compared with the stoichiometric condition. The magnetic properties of calcined SrM and (La-Mn)$_{0.3}$-SrM composition were as follows, respectively; M$_{s}$ : 61.06 emu/g, $_{i}$H$_{c}$ : 4.45 kOe and M$_{s}$ : 61.06 emu/g, $_{i}$H$_{c}$ : 4.46 kOe. Also, the sintered ferrite magnets of Mn$_{0.3}$-SrM and [(La-Mn)$_{0.3}$-SrM exhibited a similar properties to the stoichiometric composition but the coercivity of (La-Mn)$_{x}$-SrM was decreased rapidly with x=0.5.

• Journal of the Korean Ceramic Society
• /
• v.33 no.8
• /
• pp.883-888
• /
• 1996

• Journal of the Korean Magnetics Society
• /
• v.21 no.3
• /
• pp.93-98
• /
• 2011

We successfully grew $La_{0.35}Pr_{0.35}Ca_{0.3}MnO_3$(LPCMO)/$LaAlO_3$(LAO) thin film using Laser Molecular-Beam Epitaxy and studied post-growth annealing effects ($750^{\circ}C$, 5 h) on its crystal structural and magnetic properties. Whereas the single-layered LPCMO and LPCMO/STO superlattice thin films show rough surface before and after the post-growth annealing, LPCMO/LAO superlattice shows a relatively very flat surface even after the post-growth annealing. The enhancement of ferromagnetism of LPCMO/LAO superlattice after the post-growth annealing was remarkable compared to the single-layered LPCMO thin film. The coercive and saturation magnetic field of the single-layed LPCMO thin film were decreased after the post-annealing. However, for LPCMO/LAO superlattice, a same coercive and increased saturation magnetic field were exhibited after post-growth annealing. We suggest that these peculiar observations are originate from the super-structure of LPCMO and LAO.