• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.283-289
• /
• 2001

Composite cathodes of 50/50 vol% LSM- YSZ (La$_{1-x}$Sr$_{x}$MnO$_3$-yttria stabilized zirconia) were deposited onto surface- Polished YSZ electrolytes by colloidal deposition technique. The cathode characteristics were then examined by scanning electron microscopy (SEM) and X-ray diffraction (XRD) and studied by ac impedance spectroscopy (IS). The typical impedance spectra measured for an air/LSM- YSZ/YSZ/Pt/air cell at $700^{\circ}C$ were composed of two depressed arcs. Addition of YSZ to the LSM electrode significantly enlarged the triple-phase boundaries (TPB) length inside the electrode, which led to a pronounced decrease in cathodic resistivity of LSM-YSZ composite electrodes. Polishing the electrolyte surface to eliminate the influences of surface impurities and to enlarge the TPB length can further reduce cathode resistivity. The cathodic resistivity of the LSM- YSZ electrodes was a strong function of operation temperature, composition and particle size of cathode materials, applied current, and electrolyte surface roughness.

• Journal of the Korean Magnetics Society
• /
• v.9 no.5
• /
• pp.239-244
• /
• 1999

Bi-doped lanthanum magnetics $(La_{0.67-x}Bi_xCa_{0.33}MnO_3(x\;=\;0,\; 0.04,\; 0.1,\; 0.2))$ samples have been prepared by standard ceramic process. The crystallinity and microstructures of the samples have been investigated by x-ray diffractometry and optical microscopy, respectively. The magnetic and magnetoresistive properties of the samples have been measured by vibrating sample magnetometery and van der Pauw method, respectively, at the temperatures ranging of 100 K~300 K with applied magnetic field of 0.4~0.5 T. Good crystallinity and high Curie temperature (275 K) have been obtained for the Bi-doped samples with small dosage (x = 0.04, 0.1) even they were sintered at 120$0^{\circ}C$, which is about 20$0^{\circ}C$ lower than normal sintering temperature of 140$0^{\circ}C$. The Bi-doped samples with the small dosage showed lower relative electrical resistivity and higher magneto-resistive ratio compared to the undoped sample in the most temperatures measured. The Bi-doped samples also exhibited large magnetoresisitve ratio (maximum of 15% for x = 0.1) at room temperature even under a weak magnetic field of 0.4 T.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.4
• /
• pp.491-496
• /
• 2017

The hydrogen($H_2$) is promising energy carrier of renewable energy in the microgrid system such as small village and military base due to its high energy density, pure emission and convenient transportation. $H_2$ can be generated by photocatalytic water splitting, gasification of biomass and water electrolysis driven by solar cell or wind turbine. Solid oxide electrolysis cells(SOECs) are the most efficient way to mass production due to high operating temperature improving the electrode kinetics and reducing the electrolyte resistance. The SOECs are consist of nickel-yttria stabilized zirconia(NiO-YSZ) fuel electrode / YSZ electrolyte / lanthanum strontium manganite-YSZ(LSM-YSZ) air electrode due to similarity to Solid Oxide Fuel Cells(SOFCs). The Ni-YSZ most widely used fuel electrode shows several problems at SOEC mode such as degradation of the fuel electrode because of Ni particle's redox reaction and agglomeration. Therefore Ni-YSZ need to be replaced to an alternative fuel electrode material. In this study, We studied on the Double perovskite $PrBrMnO_{5+{\delta}}$(PBMO) due to its high electric conductivity, catalytic activity and electrochemical stability. PBMO was impregnated into the scaffold electrolyte $La_{0.8}Sr_{0.2}Ga_{0.85}Mg_{0.15}O_{3-{\delta}}$(LSGM) to be synthesized at low temperature for avoiding secondary phase generated when it exposed to high temperature. The Half cell test was conducted at SOECs and SOFCs modes.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.6
• /
• pp.651-656
• /
• 2005

Toluene, which is emitted from textile process, is considered as an important hazardous air pollutant. In this study, the catalytic activity of transition metal oxides(Cu, Mn, V, Cr, Co, Ni, Ce, Sn, Fe, Sr, Cs, Mo, La, W, Zn)/${\gamma}-Al_2O_3$ catalysts was investigated to carry out the complete oxidation of toluene. The metal catalysts were characterized by XRD-ray diffraction), FE-SEM(Field Emission Scanning Electron Micrograph), BET(Brunauer Emmett Teller) method and TPR(Temperature Programmed Reduction). Among the catalysts, Cu/${\gamma}-Al_2O_3$ was highly promising catalyst for the oxidation of toluene. From the BET results, it seems that the catalytic activity is not correlated to the specific surface area. XRD results indicated that most of catalysts exist as amorphous phase. From the FE-SEM results, it was observed that copper on ${\gamma}-Al_2O_3$ surface was well dispersed among catalysts. The catalytic activity for the toluene oxidation could be explained with that metal oxide catalyst was dispersed well over supports and was attributed to reduction activity in surface of catalysts.

• Journal of Chest Surgery
• /
• v.24 no.3
• /
• pp.229-244
• /
• 1991

A bioassay technique and organ bath study were performed to analyze the effects of extracellular $Ca^{2+}$ and $Ca^{2+}$-antagonists on endothelium-derived relaxing factor[s][EDRF] released from the endothelial cells of rabbit aorta. Transverse strips with intact endothelium or damaged endothelium were used for the mechanical contraction experiment using organ bath. Long segment including thoracic and abdominal aorta with endothelium [EDRF donor aorta] was perfused with Tyrode solution which was aerated with 95% $O_2-5%$ $CO_2$ mixed gas and kept at 35oC. The perfusate was bioassayed with a transverse strip of thoracic aorta with damaged endothelium. The test strip was contracted with nor-epinephrine and acetylcholine was used to stimulate the release of EDRF from endothelial cells. The results obtained were as follows; 1] The endothelium-dependent relaxation[EDR] induced by acetylcholine was biphasic; an initial rapid relaxation followed by a slow relaxation. 2] EDR induced by acetylcholine was reduced gradually with the decrease in the concentration of extracellular $Ca^{2+}$. The effect of extracellular $Ca^{2+}$ on EDR was more prominent in the late slow relaxation phase. 3] EDR to acetylcholine was not altered by acute exposure to organic $Ca^{2+}$-antagonists. Pretreatment with verapamil to the EDRF donor aortic segment did not alter the magnitude of EDR. 4] Among the inorganic $Ca^{2+}$-antagonists $Mn^{2+}$ and $Cd^{2+}$ did not inhibit EDR, whereas $Co^{2+}$ and $La^{3+}$ inhibited EDR. 5] The inhibitory response of $Co^{2+}$ to EDR developed when infused directly on the test strip. That of $La^{3+}$, however, was evoked when added to solution perfusing the donor aortic segment. The above results suggest that $Ca^{2+}$-antagonists do not affect EDR and the inhibitory effect of $Ca^{2+}$ results from influencing the action of EDRF on vascular smooth muscle, whereas that of $La^{3+}$ results from its action on the release of EDRF from endothelial cells.

• Journal of the Korean Ceramic Society
• /
• v.17 no.4
• /
• pp.179-187
• /
• 1980

Perovskite-type oxide catalysts in the $\textrm{LaMnO}_3$ family were prepared by both freeze drying and precipitation technique, and their catalytic activities with respect to the oxidation of CO with $O_2$ were measured in the composite gases. Freeze drying is a new technique for the prevention of migration of the solutes during drying. Therefore, the corrugated cordierite monolith fabricated with the Ø 1mm stainless steel bar was directly impregnated with nitrate solutions containing the appropriate cations, freeze dried and calcined. Precipitation was done by using $\textrm{(NH_4)}_2\textrm{CO}_3$ but the precipitated catalysts gave lower catalytic than the freeze dried samples due to, in part, relatively high calcining temperature. In this study, freeze dried composition had high catalytic activity, and their apparent activation energy for oxidation of CO was calculated by the rate plots using the data where the percent conversion of CO was less than 20%.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.84-85
• /
• 2002

Recently doped perovskite manganites have renewed interest because they exhibit a variety of unique magnetic and electronic behaviors such as colossal magnetoresistance (CMR), percolative phase separation, spin/charge/orbital ordering, and so on. For this reason, fabrication of thin films with the best surface morphology and controlling their magneto transport properties is essential for making magneto-resistive devices. (omitted)

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.2
• /
• pp.21-25
• /
• 2020

We investigated the flux pinning property of GdBa₂Cu₃O_7-x (GdBCO) films on top of La_0.7Sr_0.3MnO₃ (LSMO) nanoparticles deposited by a surface decoration. Both GdBCO films and LSMO nano particles were deposited by pulsed laser deposition and the number of laser pulses were varied from 80 to 320 in order to control the density of the LSMO nanoparticles. The magnetization data at 77 K showed that the critical current density (J_c) was enhanced in all of the GdBCO films with LSMO nanoparticles and that the J_c enhancement was found to be inversely proportional to the LSMO nanoparticle density. Structural analyses revealed that LSMO nanoparticles induce a compressive strain in the GdBCO films resulting in a disordering in the CuO₂ plane. Therefore, the enhanced flux pinning property in the GdBCO with LSMO nanoparticles was attributed to the competing effect between the increase of pinning centers and the increase of compressive strain in the superconducting phase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.363-364
• /
• 2009

For the application of superconductor technology, we need critical properties of superconductors such as a critical current ($I_c$). $I_c$ is varied as processing method by action of flux pinning center. Our research activities are reported on the establishment of standard measurement method for critical current in coated conductor. And then, we researched pre-studies for standardization of critical current evaluation method using IEC/TC 90 standard.

• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.350-355
• /
• 2015

To develop ceramic composite anodes of solid oxide fuel cells without metal catalysts, a small amount of barium carbonate was added to an $(La_{0.8}Sr_{0.2})(Cr_{0.5}Mn_{0.5})O_3(LSCM)$ - YSZ ceramic composite anode and its catalytic effects on the electrode performance were investigated. A barium precursor solution with citric acid was used to synthesize the barium carbonate during ignition, while a barium precursor solution without citric acid was used to create hydrated barium hydroxide. The addition of barium carbonate to the ceramic composite anode caused stable fuel cell performance at 1073 K; this performance was higher than that of a fuel cell with $CeO_2$ catalyst; however, the addition of hydrated barium hydroxide to the ceramic composite anode caused poor stability of the fuel cell performance.