• 제목/요약/키워드: $LaMnO_3$

검색결과 398건 처리시간 0.022초

박막 고체산화물 연료전지용 이트리아 안정화 지르코니아 전해질 연마표면상의 공기극 성능 (Performance of Air Electrodes with a Surface-Polished Yttria-Stabilized Zircona Electrolyte for Thin-Film Solid Oxide Fuel Cells)

  • 이유기
    • 한국재료학회지
    • /
    • 제11권4호
    • /
    • pp.283-289
    • /
    • 2001
  • 50/50 vol% LSM-YSZ (La$_{1-x}$Sr$_{x}$MnO$_3$-yttria stabilized zirconia)의 복합공기극이 콜로이드 증착법에 의해 연마된 YSZ 전해질상에 증착되었다. 그 전극 특성은 주사전자현미경, X선회절과 임피던스 분석기에 의해 연구되어졌다. 90$0^{\circ}C$에서 공기/LSM -YSZ/YSZ/Pt/공기 셀에 대해 측정된 전형적인 임피던스 스펙트럼들은 2개의 불완전한 호(depressed arc)로 구성되었다. LSM 전극에 대한 YSZ의 첨가는 전극내의 삼상계(TPB) 영역을 증가시켰으며, 이것이 LSM-YSZ 복합공기극의 비저항을 감소시켰다. 또한 전해질 표면의 불순물 제거와 TPB 길이의 증가를 위한 전해질 표면연마는 공기극의 비저항을 훨씬 더 감소시켰다. LSM-YSZ 공기극의 비저항은 작동온도, 공기극의 조성과 입자크기, 인가전류 및 전해질의 표면거칠기에 의해 큰 영향을 받았다.

  • PDF

Bi 첨가 란탄 망가나이트의 제조, 자기 및 자기저항 특성 (Fabrication, Magnetic and Magnetoresistive Properties of Bi-Doped Lanthanum Manganites)

  • 김덕실;조재경
    • 한국자기학회지
    • /
    • 제9권5호
    • /
    • pp.239-244
    • /
    • 1999
  • 란탄 망가나이트에 Bi를 첨가한 벌크 시료(La0.67xBixCa0.33MnO3(x=0, 0.04, 0.1, 0.2)들을 세라믹스 제조공정을 이용하여 제조했다. 제조한 시료들의 결정성과 미세구조를 x-선 회절분석과 광현미경으로 조사하고, 자기 및 자기저항 특성을 100~300K의 온도 범위에서 0.4~0.5T의 자기장을 인가하여 진동시료형자력계와 van der Pauw법으로 조사했다. Bi를 소량(x=0.04, 0.1) 첨가한 시료의 경우 시료를 제조할 수 있었다. 또한 Bi를 소량 첨가하는 것에 의해 측정한 대부분의 온도에서 비저항이 감소하였고 자기저항비가 증가하였다. 아울러 실온에서 약한 자기장(0.4T)하에서도 큰 자기저항비(x=0.1의 경우 15%)를 나타냈다.

  • PDF

이중 페로브스카이트 촉매 PrBaMn2O5+δ의 고온전기분해조(Solid Oxide Electrolysis Cell) 연료극 촉매로 적용 가능성에 대한 연구 (Study on Possibility of PrBaMn2O5+δ as Fuel Electrode Material of Solid Oxide Electrolysis Cell)

  • 권영진;김동연;배중면
    • 한국군사과학기술학회지
    • /
    • 제20권4호
    • /
    • pp.491-496
    • /
    • 2017
  • The hydrogen($H_2$) is promising energy carrier of renewable energy in the microgrid system such as small village and military base due to its high energy density, pure emission and convenient transportation. $H_2$ can be generated by photocatalytic water splitting, gasification of biomass and water electrolysis driven by solar cell or wind turbine. Solid oxide electrolysis cells(SOECs) are the most efficient way to mass production due to high operating temperature improving the electrode kinetics and reducing the electrolyte resistance. The SOECs are consist of nickel-yttria stabilized zirconia(NiO-YSZ) fuel electrode / YSZ electrolyte / lanthanum strontium manganite-YSZ(LSM-YSZ) air electrode due to similarity to Solid Oxide Fuel Cells(SOFCs). The Ni-YSZ most widely used fuel electrode shows several problems at SOEC mode such as degradation of the fuel electrode because of Ni particle's redox reaction and agglomeration. Therefore Ni-YSZ need to be replaced to an alternative fuel electrode material. In this study, We studied on the Double perovskite $PrBrMnO_{5+{\delta}}$(PBMO) due to its high electric conductivity, catalytic activity and electrochemical stability. PBMO was impregnated into the scaffold electrolyte $La_{0.8}Sr_{0.2}Ga_{0.85}Mg_{0.15}O_{3-{\delta}}$(LSGM) to be synthesized at low temperature for avoiding secondary phase generated when it exposed to high temperature. The Half cell test was conducted at SOECs and SOFCs modes.

전이금속 산화물 촉매를 이용한 톨루엔 분해 (Decomposition of Toluene over Transition Metal Oxide Catalysts)

  • 천태진;최성우;이창섭
    • 대한환경공학회지
    • /
    • 제27권6호
    • /
    • pp.651-656
    • /
    • 2005
  • 톨루엔은 섬유산업 공정에서 발생하는 주요한 유해성 대기 오염원으로 간주된다. 본 연구에서는 ${\gamma}-Al_2O_3$를 지지체로 한 전이 금속 산화물 촉매(Cu, Mn, V, Cr, Co, Ni, Ce, Sn, Fe, Sr, Cs, Mo, La, W, Zn)를 제조하여 톨루엔 완전 산화 반응을 조사하였다. XRD, FE-SEM, BET와 TPR 기법을 사용하여 금속 촉매의 특성을 조사하였다. 촉매 가운데 Cu/${\gamma}-Al_2O_3$ 촉매가 가장 우수한 활성을 보여주었다. BET결과 촉매 활성의 증가는 비표면적과는 관련이 적은 것으로 나타났으며, X선 회절 분석에서 대부분의 촉매들이 무정형으로 존재함이 관찰되었다. FE-SEM을 관찰한 결과, 전이금속 산화물 촉매 중 구리산화물 촉매가 지지체 표면에 고르게 분산되어 있음을 확인할 수 있었다. 톨루엔 산화반응에 따른 촉매활성 효과는 ${\gamma}-Al_2O_3$ 지지체 위에 전이금속 산화물 촉매가 고르게 분산된 점과 촉매 표면의 우수한 환원 특성에 기인하는 것으로 설명할 수 있었다.

내피세포성 이완인자에 대한 세포외 $Ca^{2+}$$Ca^{2+}$-길항제의 작용기전 (Acting Mechanisms of Extracellular$Ca^{2+}$ and $Ca^{2+}$ - antagonists on Endothelium - Derived Relaxing Factor in Rabbit Aorta.)

  • 진성훈
    • Journal of Chest Surgery
    • /
    • 제24권3호
    • /
    • pp.229-244
    • /
    • 1991
  • A bioassay technique and organ bath study were performed to analyze the effects of extracellular $Ca^{2+}$ and $Ca^{2+}$-antagonists on endothelium-derived relaxing factor[s][EDRF] released from the endothelial cells of rabbit aorta. Transverse strips with intact endothelium or damaged endothelium were used for the mechanical contraction experiment using organ bath. Long segment including thoracic and abdominal aorta with endothelium [EDRF donor aorta] was perfused with Tyrode solution which was aerated with 95% $O_2-5%$ $CO_2$ mixed gas and kept at 35oC. The perfusate was bioassayed with a transverse strip of thoracic aorta with damaged endothelium. The test strip was contracted with nor-epinephrine and acetylcholine was used to stimulate the release of EDRF from endothelial cells. The results obtained were as follows; 1] The endothelium-dependent relaxation[EDR] induced by acetylcholine was biphasic; an initial rapid relaxation followed by a slow relaxation. 2] EDR induced by acetylcholine was reduced gradually with the decrease in the concentration of extracellular $Ca^{2+}$. The effect of extracellular $Ca^{2+}$ on EDR was more prominent in the late slow relaxation phase. 3] EDR to acetylcholine was not altered by acute exposure to organic $Ca^{2+}$-antagonists. Pretreatment with verapamil to the EDRF donor aortic segment did not alter the magnitude of EDR. 4] Among the inorganic $Ca^{2+}$-antagonists $Mn^{2+}$ and $Cd^{2+}$ did not inhibit EDR, whereas $Co^{2+}$ and $La^{3+}$ inhibited EDR. 5] The inhibitory response of $Co^{2+}$ to EDR developed when infused directly on the test strip. That of $La^{3+}$, however, was evoked when added to solution perfusing the donor aortic segment. The above results suggest that $Ca^{2+}$-antagonists do not affect EDR and the inhibitory effect of $Ca^{2+}$ results from influencing the action of EDRF on vascular smooth muscle, whereas that of $La^{3+}$ results from its action on the release of EDRF from endothelial cells.

  • PDF

자동차 배기가스 중의 CO 가스 제거를 위한 촉매장치의 개발에 관한 연구 (The Study on the Supported Oxide Catalysts for Reducing CO Gas in Automotive Exhaust Gas)

  • 김환
    • 한국세라믹학회지
    • /
    • 제17권4호
    • /
    • pp.179-187
    • /
    • 1980
  • Perovskite-type oxide catalysts in the $\textrm{LaMnO}_3$ family were prepared by both freeze drying and precipitation technique, and their catalytic activities with respect to the oxidation of CO with $O_2$ were measured in the composite gases. Freeze drying is a new technique for the prevention of migration of the solutes during drying. Therefore, the corrugated cordierite monolith fabricated with the Ø 1mm stainless steel bar was directly impregnated with nitrate solutions containing the appropriate cations, freeze dried and calcined. Precipitation was done by using $\textrm{(NH_4)}_2\textrm{CO}_3$ but the precipitated catalysts gave lower catalytic than the freeze dried samples due to, in part, relatively high calcining temperature. In this study, freeze dried composition had high catalytic activity, and their apparent activation energy for oxidation of CO was calculated by the rate plots using the data where the percent conversion of CO was less than 20%.

  • PDF

Strain induced magnetic stripe domains in $La_{0.7}Sr_{0.3}MnO_3$ thin films

  • Joonghoe Dho;Kim, Y. N.;Y. S. Hwang;E. O. Chi;Kim, J. C.;Lee, E. K.;N. H. Hur
    • 한국자기학회:학술대회 개요집
    • /
    • 한국자기학회 2002년도 동계연구발표회 논문개요집
    • /
    • pp.84-85
    • /
    • 2002
  • Recently doped perovskite manganites have renewed interest because they exhibit a variety of unique magnetic and electronic behaviors such as colossal magnetoresistance (CMR), percolative phase separation, spin/charge/orbital ordering, and so on. For this reason, fabrication of thin films with the best surface morphology and controlling their magneto transport properties is essential for making magneto-resistive devices. (omitted)

  • PDF

Enhanced flux pinning property of GdBa2Cu3O7-x films by ferromagnetic surface decoration

  • Song, C.Y.;Oh, J.Y.;Ko, Y.J.;Lee, J.M.;Kang, W.N.;Kang, B.
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제22권2호
    • /
    • pp.21-25
    • /
    • 2020
  • We investigated the flux pinning property of GdBa2Cu3O7-x (GdBCO) films on top of La0.7Sr0.3MnO3 (LSMO) nanoparticles deposited by a surface decoration. Both GdBCO films and LSMO nano particles were deposited by pulsed laser deposition and the number of laser pulses were varied from 80 to 320 in order to control the density of the LSMO nanoparticles. The magnetization data at 77 K showed that the critical current density (Jc) was enhanced in all of the GdBCO films with LSMO nanoparticles and that the Jc enhancement was found to be inversely proportional to the LSMO nanoparticle density. Structural analyses revealed that LSMO nanoparticles induce a compressive strain in the GdBCO films resulting in a disordering in the CuO2 plane. Therefore, the enhanced flux pinning property in the GdBCO with LSMO nanoparticles was attributed to the competing effect between the increase of pinning centers and the increase of compressive strain in the superconducting phase.

고온초전도 coated conductor의 임계전류 측정 표준화 연구 I (A study of standardizing Critical-Current Measurements for coated conductor I)

  • 오상수;이남진;김호섭;염도준
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.363-364
    • /
    • 2009
  • 본 연구는 IEC/TC 90 규격을 참조하여 Cu stabilizer/Ag/$LaMnO_3$/IBAD-MgO/$Y_2O_3$/$Al_2O_3$/Hastelloy C276/Cu stabilizer의 구조를 가지는 coated conductor의 DC 임계 전류의 결정에 대한 사전 연구를 위해 (1) 시편의 냉각시간, (2) 전류 선의 용량을 변화하여 임계 전류의 변화를 관찰하여 다음과 같은 결과를 얻었다. (1) 5분 이상의 시편 냉각시간은 COV가 약 0.4% 정도로 거의 임계 전류 결정에 영향을 주지 않았으며, 냉각 시간이 길면 길수록 임께 전류 이하에서 전압의 기저면이 낮아지는 경향을 보였다. (2) 전류 선의 용량이 클수록 임계 전류 이하에 전압의 기저면이 낮아지는 경향을 보였다.

  • PDF

Catalytic Effects of Barium Carbonate on the Anodic Performance of Solid Oxide Fuel Cells

  • Yoon, Sung-Eun;Ahn, Jae-Yeong;Park, Jong-Sung
    • 한국세라믹학회지
    • /
    • 제52권5호
    • /
    • pp.350-355
    • /
    • 2015
  • To develop ceramic composite anodes of solid oxide fuel cells without metal catalysts, a small amount of barium carbonate was added to an $(La_{0.8}Sr_{0.2})(Cr_{0.5}Mn_{0.5})O_3(LSCM)$ - YSZ ceramic composite anode and its catalytic effects on the electrode performance were investigated. A barium precursor solution with citric acid was used to synthesize the barium carbonate during ignition, while a barium precursor solution without citric acid was used to create hydrated barium hydroxide. The addition of barium carbonate to the ceramic composite anode caused stable fuel cell performance at 1073 K; this performance was higher than that of a fuel cell with $CeO_2$ catalyst; however, the addition of hydrated barium hydroxide to the ceramic composite anode caused poor stability of the fuel cell performance.