• Koreanishche Zeitschrift fur Deutsche Sprachwissenschaft
• /
• v.10
• /
• pp.1-24
• /
• 2004

Wir leben heute in der sosenannten Wissensgesellschaft. Diese Geseilschaft kann durch den Zugang zu immensen Wissens- und Informationsbestanden sowie durch einen fruher nicht denkbaren Grad an $Akualit\"{a}t$ dieser Informationen gekennzeichnet werden Deutsche Unternehmen haben bereits erkannt, dass das Wissen ihrer Mitarbeiter den Wert eines Unternehmens $ma{\ss}geblich$ bestimmt. Deshalb fordern sie von ihren Mitarbeitern, sich immer speziellere, immer neuere Wissensinhaite bzw. Informationen immer schneller anzueignen. Dies gilt auch $f\"{u}r$ Fremdsprachen, deren Kenntnis im Prozess der weit vorangeschrittenen Internationalisierung und Globalisierung als ein wesentliches Instrument vorausgesetzt wird. Der Hangel an fremdsprachlichen $F\"{a}higkeiten$ in Betrieben wirkt sick vol allem auf ihre Kompetenz im Umgang mil einer steigenden Anzahl von $Gesch\"{a}ftskontakten$ und ihre $ausl\"{a}ndischen$ $M\"{a}rkte$ aus. D. h. er bedeutet in einer durch zunehmenden Wettbewerb bestimmten Weit Marktverluste. Unternehmen sollen Herausforderungen $bew\"{a}ltigen$, die $gro{\ss}e$ interaktive und kommunikative $F\"{a}higkeit$ erfordern, $Ver\"{a}nderungen$ zu begreifen, sich ihnen zu stollen und sie zu $\"{u}berwinden$, um erfolgreich einen $gr\"{o}{\ss}eren$ Wirkungskreis auf den $Weltm\"{a}rkten$ zv erreichen. Deutsche Unternehmen erkennen inzwischen die besondere Bedeutung von $Fremdsprachenf\"{a}higkeiten$ ihrer Mitarbeiter $f\"{u}r$ Erfdlgssicherung und -ausbau. Diese Erkenntnisse ergeben sich auch aufgrund von Unternehmensbefragungen (z.B. vom Institut der deutschen Wirtschafi, $K\"{o}ln$). In fast allen Unternehmen ist Englisch die Fremdsprache Nummer Eins. Sie brauchen allerdings mehr als eine Fremdsprache. In der Regel werden zwei bis drei Fremdsprachen pro Betrieb $ben\"{o}tigt$. Wie $gro{\ss}$ der Fremdsprachenbedarf ist, $h\"{a}ngt$ von verschiedenen Faktoren ab: 1) Je $gr\"{o}{\ss}er$ ein Betrieb ist, desto wichtiger werden die fremdsprachlichen $F\"{a}higkeiten$ seiner Mitarbeiter. 2) In Firmen mit Auslandsverbindung und Unternehmen, die Teil eines $ausl\"{a}ndischen $Betriebes sind bzw $ausl\"{a}indische$ Niederlassungen haben, ist der Fremdsprachenbedarf von $gro{\ss}er$ Bedeutung. 3) Nach Branchen ist der Fremdsprachenbedarf differenziert. Fremdsprachenkenntnisse sind im exportorientierten produzierenden Gewerbe unverzichtbar. 4) In den verschiedenen Unternehmensbereichen werden Fremdsprachenkenntnisse differenziert $ben\"{o}tigt$. Funktionsbereiche wie Verkauf und Kundenbetreuung haben den $st\"{a}rksten$ Fremdsprachenbedarf, Kommunikation ist eine wesentliche Voraussetzung $f\"{u}r$ erfolgreiche Verhandlungen. Je $gr\"{o}{\ss}er$ die sprachliche $F\"{a}higkeiten$ und das Geschick der Mitarbeiter sind, umso besser laufen die $Gesch\"{a}ftsverhandlungen$. Damit wird klar, weshalb sich viele deutsche Unternehmen beim Fremdsprachenlernen, bzw. bei der Fort- und Weiterbildung von Fremdsprachenkenntnissen ihrer Mitarbeiter spendabel zeigen.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.38-38
• /
• 1999

KSTAR(Korea Superconducting Tokamak Advanced Research) 핵융합 실험 장치의 진공용기 및 진공용기 내부의 플라즈마 대향 부품들은 초고진공 (5$\times$10-9 Torr)의 달성을 위해 진공용기 내부의 이물질(H2, H2O, CO, CO2, CH4 등) 제거를 목적으로 SS316LN인 진공용기는 25$0^{\circ}C$, 탄소 물질인 플라즈마 대향부품은 35$0^{\circ}C$ 정도까지 가열(이하 베이킹)할 필요성이 있다. 이 가열방법으로 고온 질소가스를 진공용기 이중벽 사이로 흘려주는 방식과 코일에 저주파 교류전류를 흘려 진공용기를 유도가열하는 방식이 고려되고 있는데, 유도가열방식은 최대 유도 전력이 70kW 정도로 실제 베이킹에 필요한 열량을 공급하는데 있어 적잖이 부족하며 또 국부적인 가열 특성으로 인하여 KSTSR의 베이킹 방식은 전자의 가열방식을 우선적으로 채택하고 있다. 본 논문에서는 0-차원 해석을 통하여 진공용기와 플라즈마 대향 부품들에 대한 베이킹 계획을 결정하고 이를 만족시키기 위해 투입해야 할 열량을 직선적으로 증가하는 온도 곡선에서 각 부분의 온도 상승률을 다르게 설정한 세 경우와 F-자 형태로 변화하는 온도 곡선의 경우에 대해 각각 적용하여 시간에 따른 필요열량을 비교.검토하였으며, 이를 근거로 안정적인 베이킹 계획을 선정하였고 이 베이킹 계획의 실현을 위해 투입해야 할 고온 질소가스의 유량과 온도 도달시간까지 매 시간에서의 가스온도를 산출하였다. 토러스 형상의 토카막 진공용기와 플라즈마 대향 부품 및 다층단열재에 대한 해석 모델은 길이가 유한한 0-차원 실린더 모델로 가정하였고, 이에 대한 기하학적 성질 및 열역학적 성질은 유효계수를 고려하여 산출하였다. 진공용기 이중 벽 내부로 흐르는 질소가스의 유량과 온도의 계산은 진공용기 내벽과 외벽을 각각 독립적인 열전달 요소로 가정하여 구성한 모델을 이용하였다. 전체 해석에서 각 열전달 요소의 비열 값은 온도에 따라 변화하는 비열의 특성을 반영하였으며. 진공용기와 플라즈마 대향 부품의 방사율(emissivity)은 앞서 가정했던 각 온도 상승 곡선에 대해서 각각 0.1, 0.2, 1.3의 경우를 가정하여 계산하였다. 직선적으로 증가하는 온도 상승 곡선중 2$0^{\circ}C$/hr의 온도상승율을 갖는 경우가 다른 베이킹 시나리오 모델에 비해 효과적이라 생각되며 초대 필요 공급열량은 200kW 정도로 산출되었다. 실질적인 수치를 얻기 위해 보다 고차원 모델로의 해석이 필요하리라 생각된다. 끝으로 장기적인 관점에서 KSTAR 장치의 베이킹 계획도 살펴본다.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.211-216
• /
• 2003

Absorption characteristics of hot air-. vacuum-, and freeze-dried ginger powder were investigated. Monolayer moisture content as determined by GAB equation was $0.257{\sim}0.540\;H_2O/g$, showing higher significance than BET equation. Absorption enthalpy was calculated based on different drying methods and water activities. Absorption energy decreased with increasing water activity but was not affected by drying method. Isotherm curves showed a typical sigmoid form. Among models applied for predicting equilibrium moisture content, Caurie model was the best fit model for ginger powder, showing the lowest prediction deviation of $1.2{\sim}5.4%$, followed by Henderson then Bradley models. The prediction model equations for the moisture content were established by in(time), water activity, and temperature.

• Clinical and Experimental Pediatrics
• /
• v.48 no.2
• /
• pp.158-164
• /
• 2005

Purpose : We reviewed the therapeutic results of various Duct-Occlud coils(pfm AG, $K{\ddot{o}}ln$, Germany) to evaluate the efficacy of the most-recently modified Duct-Occlud coil(Nit-Occlud) in the transcatheter closure of patent ductus arteriosus(PDA), including large defects more than 4 mm in diameter. Methods : Two hundred and five patients who underwent percutaneous PDA occlusion using Duct-Occlud devices from March 1996 to December 2003 were enrolled and four types of Duct-Occlud [Standard(S), Reinforced(R), Reinforced reverse cone(RR) and Nit-Occlud(N)] were used in this study. The patients were followed up by echocardiogram and physical examination before discharge, one month, six months and 12 months after the procedure. Results : The rate of residual shunt according to the type of Duct-Occlud were as follows : S-54%, R-72%, RR-50%, N-14%(P<0.05 compared with other devices) at one month, S-25%, R-44%, RR-37%, N-0%(P<0.05 compared with other devices) at six months, S-8%, R-8%, RR-4%, N-0%(P<0.05 compared with S and R) at 12 months and later. Nit-Occlud coil showed the complete occlusion of PDA after six months of follow-up, even in 12 patients with relatively large PDA(>4 mm). Conclusion : The transcatheter closure of PDA using Duct-Occlud was an effective treatment and our study revealed that a Nit-Occlud coil which showed higher rate of occlusion even in PDA with large diameters over than 4 mm, was a more effective modality compared to previous devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.463-463
• /
• 2014

Dye-sensitized solar cells (DSSCs) have generated a strong interest in the development of solid-state devices owing to their low cost and simple preparation procedures. Effort has been devoted to the study of electrolytes that allow light-to-electrical power conversion for DSSC applications. Several attempts have been made to substitute the liquid electrolyte in the original solar cells by using (2,2',7,7'-tetrakis (N,N-di-p-methoxyphenylamine)-9-9'-spirobi-fluorene (spiro-OMeTAD) that act as hole conductor [1]. Although efficiencies above 3% have been reached by several groups, here the major challenging is limited photoelectrode thickness ($2{\mu}m$), which is very low due to electron diffusion length (Ln) for spiro-OMeTAD ($4.4{\mu}m$) [2]. In principle, the $TiO_2$ layer can be thicker than had been thought previously. This has important implications for the design of high-efficiency solid-state DSSCs. In the present study, we have fabricated 3-D Transparent Conducting Oxide (TCO) by growing tin-doped indium oxide (ITO) nanowire (NWs) arrays via a vapor transport method [3] and mesoporous $TiO_2$ nanoparticle (NP)-based photoelectrodes were prepared using doctor blade method. Finally optimized light-harvesting solid-state DSSCs is made using 3-D TCO where electron life time is controlled the recombination rate through fast charge collection and also ITO NWs length can be controlled in the range of over $2{\mu}m$ and has been characterized using field emission scanning electron microscopy (FE-SEM). Structural analyses by high-resolution transmission electron microscopy (HRTEM) and X-Ray diffraction (XRD) results reveal that the ITO NWs formed single crystal oriented [100] direction. Also to compare the charge collection properties of conventional NPs based solid-state DSSCs with ITO NWs based solid-state DSSCs, we have studied intensity modulated photovoltage spectroscopy (IMVS), intensity modulated photocurrent spectroscopy (IMPS) and transient open circuit voltages. As a result, above $4{\mu}m$ thick ITO NWs based photoelectrodes with Z907 dye shown the best performing device, exhibiting a short-circuit current density of 7.21 mA cm-2 under simulated solar emission of 100 mW cm-2 associated with an overall power conversion efficiency of 2.80 %. Finally, we achieved the efficiency of 7.5% by applying a CH3NH3PbI3 perovskite sensitizer.

• Journal of Ecology and Environment
• /
• v.43 no.4
• /
• pp.376-384
• /
• 2019

Background: Nutrient release during litter decomposition was investigated in Vitex doniana, Terminalia avecinioides, Sarcocephallus latifolius, and Parinari curatellifolius in Makurdi, Benue State Nigeria (January 10 to March 10 and from June 10 to August 10, 2016). Leaf decomposition was measured as loss in mass of litter over time using the decay model W_t/W₀ = e-^{kd t}, while $Kd=-{\frac{1}{t}}In({\frac{Wt}{W0}})$ was used to evaluate decomposition rate. Time taken for half of litter to decompose was measured using T₅₀ = ln ²/k; while nutrient accumulation index was evaluated as $NAI=(\frac{{\omega}t\;Xt}{{\omega}oXo})$. Results: Average mass of litter remaining after exposure ranged from 96.15 g, (V. doniana) to 78.11 g, (S. lafolius) in dry (November to March) and wet (April to October) seasons. Decomposition rate was averagely faster in the wet season (0.0030) than in the dry season (0.0022) with P. curatellifolius (0.0028) and T. avecinioides (0.0039) having the fastest decomposition rates in dry and wet seasons. Mean residence time (days) ranged from 929 to 356, while the time (days) for half the original mass to decompose ranged from 622 to 201 (dry and wet seasons). ANOVA revealed highly significant differences (p < 0.01) in decomposition rates and exposure time (days) and a significant interaction (p < 0.05) between species and exposure time in both seasons. Conclusion: Slow decomposition in the plant leaves implied carbon retention in the ecosystem and slow release of CO₂ back to the atmosphere, while nitrogen was mineralized in both seasons. The plants therefore showed effectiveness in nutrient cycling and support productivity in the ecosystem.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3317-3323
• /
• 2022

Half Value Layer calculations theoretically need prior specification of linear attenuation calculations, since the HVL value is derived by dividing ln(2) by the linear attenuation coefficient. The purpose of this study was to establish a direct computational model for determining HVL, a vital parameter in nuclear radiation safety studies and shielding material design. Accordingly, a typical gamma-ray transmission setup has been modeled using MCNPX (version 2.4.0) general-purpose Monte Carlo code. The MCNPX code's INPUT file was designed with two detection locations for primary and secondary gamma-rays, as well as attenuator material between those detectors. Next, Half Value Layer values of some well-known gamma-ray shielding materials such as lead and ordinary concrete have been calculated throughout a broad gamma-ray energy range. The outcomes were then compared to data from the National Institute of Standards and Technology. The Half Value Layer values obtained from MCNPX were reported to be highly compatible with the HVL values obtained from the NIST standard database. Our results indicate that the developed INPUT file may be utilized for direct computations of Half Value Layer values for nuclear safety assessments as well as medical radiation applications. In conclusion, advanced simulation methods such as the Monte Carlo code are very powerful and useful instruments that should be considered for daily radiation safety measures. The modeled MCNPX input file will be provided to the scientific community upon reasonable request.

• Journal of Korean Society on Water Environment
• /
• v.35 no.6
• /
• pp.510-519
• /
• 2019

The 'Stable Isotope Analysis in R' (SIAR), one of the Bayesian mixing models for stable isotopes, has been proven to be useful for source apportionment of nitrates in rivers. In this study, the contribution ratios of nitrate sources were quantified by using the SIAR based on nitrogen and oxygen stable isotope measurements in the Yeongsan River. From the measurements, it was found that the values of δ¹⁵N-NO₃ and δ¹⁸O-NO₃ ranged from -8.2 ‰ to +13.4 ‰ and from +2.2 ‰ to +9.8 ‰, respectively. We further analyzed the contribution ratios of the five nitrate sources by using the SIAR. From the modeling results, the main nitrate source was found to be soil N (29.3 %), followed by sewage (26.7 %), manure (19.6 %), chemical fertilizer (17.9 %) and precipitation (6.3 %). From the results, it was found that the anthropogenic sources, i.e., sewage, manure and chemical fertilizer contribute 64.2% of the total nitrate inflow from the watershed. Due to the significant correlation of δ¹⁵N-NO₃ and lnNO₃^- in this study, the fractionation factors reflecting the biogeochemical processes of stable isotope ratios could be directly obtained. This may make the contribution ratios obtained in this study more precise. The fractionation factors were identified as +3.64 ± 0.91 ‰ for δ¹⁵N-NO₃ (p<0.01) and -5.67 ± 1.73 ‰ for δ¹⁸O-NO₃(p<0.01), respectively, and were applied in using the SIAR. The study showed that the stable isotope method using the SIAR could be applied to quantitatively calculate the contribution ratios of nitrate sources in the Yeongsan River.

• Development and Reproduction
• /
• v.4 no.2
• /
• pp.161-173
• /
• 2000

The aim of this study was to assess the effect of the frequency of the L$N_2$ infusion on the ultrastructure, metabolism and development of the embryo after freezing and thawing by computerized cell freezer. Two-cell embryos of ICR mouse were randomly allocated into fresh (control), high-frequency freezing (group 1) and low-frequency freezing (group 2). For fresh and frozen-thawed intact 2-cell embryos, total ceil number in the blastocyst was counted by fluorescent microscope after Hoechst 33258 staining. Relative amount of $H_2O$$_2$ was measured by DCHFDA. Intracellular location and membrane potential of the mitochondria were evaluated by staining with rhodamine 123 and JC-1. The structure of actin filament was also evaluated by confocal microscope. DNA fragmentation was assessed by TUNEL method after development into blastocyst. The survival rate of intact embryo was higher in group 1 than group 2 (50.7％ vs. 34.6％ respectively, p<0.05). The blastocyst developmental rate was significantly low in group 2 (86.7％, 76.7％ vs. 44.0％ for control, group 1 and group 2 respectively, p<0.05). Total cell number in the blastocyst was also significantly lower in group 2 than control (79.5$\pm$12.9, 71.6$\pm$8.0, and 62.5$\pm$4.7 for control, group 1 and group 2 respectively, p<0.05). The relative amount of $H_2O$$_2$ was higher in group 2 than other groups (15.3$\pm$3.0, 16.6$\pm$1.6 vs. 23.4$\pm$1.8, p<0.05). After JC-1 staining, relative intensity of mitochondria with high membrane potential was significantly lower in group 2 than control and group 1 (17.2$\pm$3.8, 17.4$\pm$1.3 vs. 13.2$\pm$2.0, p<0.05). In group 2, partial deletion and aggregation of the actin filament was found. DNA fragmentation rate was also hieher for group 2 versus other groups (30.8％, 36.0％ vs. 65.6％, p<0.05). The frequency of the L$N_2$ infusion is an important factor for the development of frozen-thawed mouse embryo. High-frequency infusion may prevent damages of cytoskeleton and mitochondria in the embryo probably by preventing the temperature fluctuation during dehydration phase. We speculate that the application of high-frequency infusion method in human embryo may be promising.

• YAKHAK HOEJI
• /
• v.38 no.3
• /
• pp.265-273
• /
• 1994

ln vitro and in vivo antibacterial activities of DWQ-013(1-cyclopropyl-6,8-difluoro-7-(3-methylthiomethylpyrrolidinyl)-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid), a new fluoroquinolone antibacterial agent, were compared with those of ciprofloxacin, sparfloxacin and ofloxacin against aerobic and anaerobic standard strains and clinical isolates. DWQ-013 had a broad spectrum and potent antibacterial activity against Gram-positive and Gram-negative bacteria. The antibacterial activity of DWQ-013 against Staphylococcus aureus was equal to that of sparfloxacin(SPFX) and superior to those of ciprofloxacin(CPFX). The antibacterial activity against Gram-negative bacteria was slightly lower than those of ciprofloxacin and sparfloxacin. MIC of DWQ-013 against Pseudomonas aeruginosa$(0.781{\sim}1.563\;{\mu}g/ml)$ was usually equal to that of sparfloxacin$(0.781\;{\mu}g/ml)$ and was inferior to that of ciprofloxacin$(0.098\;{\mu}g/ml)$. The number of viable cells was decreased rapidly after addition of DWQ-013 at concentration of $1{\sim}2$ folds of MIC.