• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.5
• /
• pp.716-724
• /
• 2015

Trienzyme extraction coupled with microplate assay (Lactobacillus casei subsp. rhamnosus) was validated and applied for the determination of folate (vitamin B9) in Korean ancestral rite foods. Foods included five Guk (Tang), eleven Sookchaes, eight Jeoks, nine Jeons, six Jjims, and twenty desserts. Folate was detected in all samples: Guk (Tang) 4.62~18.84, Sookchae 6.13~48.40, Jeok 5.49~49.50, Jeon 6.96~30.77, Jjim 10.34~38.88, and desserts $3.33{\sim}49.55{\mu}g/100g$. The lowest folate content was observed in Sikhye ($3.33{\mu}g/100g$), whereas the highest was observed in Songhwa-dasik ($49.55{\mu}g/100g$). Folate analyses of certified reference materials, BCR-121 (whole meal flour) and BCR-487 (pig liver), showed good recoveries of 90.0% (0.45 mg/kg) and 92.4% (12.3 mg/kg), respectively. The recoveries (96.0 to 106.2%) obtained by analyzing eight spiked samples with different matrices also showed good accuracy. Both repeatability and reproducibility were less than 5%, indicating good precision. The quality control chart (n>30) obtained by running commercial folate fortified-wheat flour once a week for about 10 months showed that all assays were under control. All validation method and analytical quality control results showed that folate contents in Korean ancestral rite foods produced by microplate assay were reliable enough to be used for the construction of a national folate database.

• Journal of the Korea Society for Simulation
• /
• v.21 no.2
• /
• pp.79-90
• /
• 2012

In this paper, a feature signal extraction method is proposed in order to enhance the low performance of fault detection caused by unbalanced data which denotes the situations when severe disparity exists between the numbers of class instances. Most of the cyclic signals gathered during the process are recognized as normal, while only a few signals are regarded as fault; the majorities of cyclic signals data are unbalanced data. SOM(Self-Organizing Map)-based feature signal extraction method is considered to fix the adverse effects caused by unbalanced data. The weight neurons, mapped to the every node of SOM grid, are extracted as the feature signals of both class data which are used as a reference data set for fault detection. kNN(k-Nearest Neighbor) and SVM(Support Vector Machine) are considered to make fault detection models with comparisons to Hotelling's $T^2$ Control Chart, the most widely used method for fault detection. Experiments are conducted by using simulated process signals which resembles the frequent cyclic signals in semiconductor manufacturing.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.17 no.2
• /
• pp.113-119
• /
• 2017

Background: The purpose of this study was to investigate the distribution of systemic diseases and medications in patients older than 65 years of age who visited the hospital for implant treatment, as well as to investigate basic information about surgical complications that may occur after insured implant treatment. Method: A total of 126 patients over 65 years of age were treated for implant surgery from October 1, 2013 to October 30, 2016. Electronic chart review was conducted to obtain medical records, which included sex, age, systemic diseases, medication(s) being taken, and control of the medications. Five patients were excluded due to lack of medical records giving information about systemic disease. Results: Of the 126 patients, 112 (88.9%) were taking medication due to systemic disease and 9 patients (7.1%) were not. The sex distribution was 71 women and 55 men and the highest proportion of patients were between 65 and 69 years old. The most common diseases were, from most to least frequent, hypertension, cardiovascular disease, diabetes, and osteoporosis. The drug groups that can cause major complications after dental treatment were classified as hemorrhagic, osteoporotic, and immunosuppressive agents, and were taken by 45 (35.7%), 22 (17.5%) and 4 (3.2%) patients, respectively. Conclusion: Given that 88.9% of the elderly patients who were eligible for insurance implant treatment had systemic disease, it is necessary to carefully evaluate patients' medical histories and their general conditions in order to prevent emergencies during implant surgery.

• Journal of Environmental Health Sciences
• /
• v.50 no.2
• /
• pp.125-137
• /
• 2024

Background: The Korea Risk Information Surveillance System (K-RISS) was developed to enable the early detection of food and drug safety-related issues. Its goal is to deliver real-time risk indicators generated from ongoing food and drug risk monitoring. However, the existing K-RISS system suffers under several limitations. Objectives: This study aims to augment K-RISS with more detailed indicators and establish a severity standard that takes into account structural changes in the daily time series of K-RISS values. Methods: First, a Delphi survey was conducted to derive the required weights. Second, a control chart, commonly used in statistical process controls, was utilized to detect outliers and establish caution, attention, and serious levels for K-RISS values. Furthermore, Bai and Perron's method was employed to determine structural changes in K-RISS time series. Results: The study incorporated 'closeness to life' and 'sustainability' indicators into K-RISS. It obtained the necessary weights through a survey of experts for integrating variables, combining indicators by data source, and aggregating sub K-RISS values. We defined caution, attention, and serious levels for both average and maximum values of daily K-RISS. Furthermore, when structural changes were detected, leading to significant variations in daily K-RISS values according to different periods, the study systematically verified these changes and derived respective severity levels for each period. Conclusions: This study enhances the existing K-RISS system and introduces more advanced indicators. K-RISS is now more comprehensively equipped to serve as a risk warning index. The study has paved the way for an objective determination of whether the food safety risk index surpasses predefined thresholds through the application of severity levels.

• Archives of Plastic Surgery
• /
• v.41 no.1
• /
• pp.57-62
• /
• 2014

Background Achieving symmetry is a key goal in breast reconstruction. Anatomically shaped tabbed expanders are a new tool in the armamentarium of the breast reconstruction surgeon. Suture tabs allow for full control over the expander position and thus inframammary fold position, and, in theory, tabbed expanders mitigate many factors responsible for poor symmetry. The impact of a tabbed expander on breast symmetry, however, has not been formally reported. This study aims to evaluate breast symmetry following expander-implant reconstruction using tabbed and non-tabbed tissue expanders. Methods A chart review was performed of 188 consecutive expander-implant reconstructions that met the inclusion criteria of adequate follow-up data and postoperative photographs. Demographic, oncologic, postoperative complication, and photographic data was obtained for each patient. The photographic data was scored using a 4-point scale assessing breast symmetry by three blinded, independent reviewers. Results Of the 188 patients, 74 underwent reconstruction with tabbed expanders and 114 with non-tabbed expanders. The tabbed cohort had significantly higher symmetry scores than the non-tabbed cohort ($2.82/4{\pm}0.86$ vs. $2.55/4{\pm}0.92$, P=0.034). Conclusions The use of tabbed tissue expanders improves breast symmetry in tissue expander-implant-based breast reconstruction. Fixation of the expander to the chest wall allows for more precise control over its location and counteracts the day-to-day translational forces that may influence the shape and location of the expander pocket, mitigating many factors responsible for breast asymmetry.

• Journal of radiological science and technology
• /
• v.32 no.4
• /
• pp.361-370
• /
• 2009

The image quality management of bone mineral density is the responsibility and duty of radiologists who carry out examinations. However, inaccurate conclusions due to lack of understanding and ignorance regarding the methodology of image quality management can be a fatal error to the patient. Therefore, objective of this paper is to understand proper image quality management and enumerate methods for examiners and patients, thereby ensuring the reliability of bone mineral density exams. The accuracy and precision of bone mineral density measurements must be at the highest level so that actual biological changes can be detected with even slight changes in bone mineral density. Accuracy and precision should be continuously preserved for image quality of machines. Those factors will contribute to ensure the reliability in bone mineral density exams. Proper equipment management or control methods are set with correcting equipment each morning and after image quality management, a phantom, recommended from the manufacturer, is used for ten to twenty-five measurements in search of a mean value with a permissible range of ${\pm}1.5%$ set as standard. There needs to be daily measurement inspections on the phantom or at least inspections three times a week in order to confirm the existence or nonexistence of changes in values in actual bone mineral density. in addition, bone mineral density measurements were evaluated and recorded following the rules of Shewhart control chart. This type of management has to be conducted for the installation and movement of equipment. For the management methods of inspectors, evaluation of the measurement precision was conducted by testing the reproducibility of the exact same figures without any real biological changes occurring during reinspection. Bone mineral density inspection was applied as the measurement method for patients either taking two measurements thirty times or three measurements fifteen times. An important point when taking measurements was after a measurement whether it was the second or third examination, it was required to descend from the table and then reascend. With a 95% confidence level, the precision error produced from the measurement bone mineral figures came to 2.77 times the minimum of the biological bone mineral density change. The value produced can be stated as the least significant change (LSC) and in the case the value is greater, it can be stated as a section of genuine biological change. From the initial inspection to equipment moving and shifter, management must be carried out and continued in order to achieve the effects. The enforcement of proper quality control of radiologists performing bone mineral density inspections which brings about the durability extensions of equipment and accurate results of calculations will help the assurance of reliable inspections.

• Plant Journal
• /
• v.11 no.2
• /
• pp.45-51
• /
• 2015

In this paper, studied condenser operating management which is affecting power plants efficiency considering the cost of poor quality. Sea water temperature and condenser pressure have clear correlation in S power plants. As the sea water temperature changes, condenser pressure changed -1.7~+20 mmHg from design condenser pressure(38.1 mmHg). Use the heat rate correction curve from manufactory company, realized that efficiency and cost of poor quality changed 0.0201%, 12,830 won/h at Unit #1,2 but 0.0155%, 9,832 won/h when condenser pressure 1 mmHg rise. Also, checked that it is changed depend on seasonal corresponding operation, plant ageing and the point of preventive maintenance like overhaul maintenance. This study said if we considered complying with management range and planning overhaul maintenance, then it could help reducing operating maintenance losses minimum 2.5 billion won per 1 year (case : Unit #1, forty days maintenance).

• Korean Journal of Clinical Pharmacy
• /
• v.18 no.2
• /
• pp.75-83
• /
• 2008

Purpose: Currently lung cancer ranks second in cancer for incidence rate and is a disease that ranks first for a death rate by cancerous growth because it is already advanced at the time of diagnosis. The purpose of this paper was to analyze the factors that affect the effectiveness of and rash occurrence by Epidermal Growth Factor Receptor Tyrosine Kinase Inhibitor (EGFR TKI) in patients with non-small cell lung cancer. Methods: A retrospective chart review of 100 patients, who took EGFR TKI (erlotinib, gefitinib) among patients who were diagnosed with non-small cell lung cancer in a Hospital in Korea between May 2005 and February 2008, was conducted. The drug effectiveness was evaluated by Response Evaluation Criteria In Solid Tumor. Results: EGFR mutation was the only factor associated with drug response (complete response and partial response). When stable disease was added to drug response as the evaluation parameter, ECOG and rash as well as EGFR mutation were found to be important factors. Survival, however, was not affected by EGFR mutation. The factors influenced on survival were older age (${\geq}65$), low ECOG ($1{\sim}2$), adenocarcinoma and rash. In the case of rash, group with EGFR mutation or low ECOG showed significantly higher chance of occurrence. There was no significant difference in rash occurrence between gefitinib and erlotinib groups. Conclusions: Based on the results, EGFR mutation positive and low ECOG ($1{\sim}2$) were significantly important factors for both effectiveness of EGFR TKI and rash occurrence. Also, rash itself was found to be an independently significant factor for the disease control and survival. Therefore, while administering EGFR TKI, patients who have the factors associated with rash occurrence should be closely monitored for effective and safe drug therapy.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.2
• /
• pp.140-148
• /
• 2007

This paper describes on the real-time monitoring of dredging information for grab bucket dredger equipped with winch control sensors and differential global positioning system(DGPS) using electronic chart display and information system(ECDIS). The experiment was carried out at Gwangyang Hang and Gangwon-do Oho-ri on board M/V Kunwoong G-16. ECDIS system monitors consecutively the dredging's position, heading and shooting point of grab bucket in real-time through 3 DGPS attached to the top bridge of the dredger and crane frame. Dredging depth was measured by 2 up/down counter fitted with crane winch of the dredger. The depth and area of dredging in each shooting point of grab bucket are displayed in color band. The efficiency of its operation can be ensured by adjusting the tidal data in real-time and displaying the depth of dredging on the ECDIS monitor. The reliance for verification of dredging operation as well as supervision of dredging process was greatly enhanced by providing three-dimensional map with variation of dredging depth in real time. The results will contribute to establishing the system which can monitor and record the whole dredging operations in real-time as well as verify the result of dredging quantitatively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4310-4317
• /
• 2014

The HACCP (Hazard Analysis Critical Control Point) system was applied to Handmade Rice Cakes. The main ingredients of rice cakes, work facilities and workers were provided from the KB company located in Seogye-dong Yongsan-gu, Seoul between September 12, 2012 and February 13, 2013. The manufacturing process chart was prepared by referring to the manufacturing process of rice cake manufacturers in general. Microbiological hazard analysis of the raw materials and after the steaming process of rice-cakes showed a safe result. On the other hand, the microorganism test on the manufacturing environment and workers suggested that the microbiological hazard can be reduced through systematic cleaning and disinfection, accompanied by improved personal hygiene based on hygienic education for workers on the management of microorganisms in the working area.