• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2000년도 추계학술발표회 초록집
• /
• pp.63-64
• /
• 2000

• Environmental Engineering Research
• /
• 제24권4호
• /
• pp.646-653
• /
• 2019

Recovery of valuable metals in the industrial wastewater and sludge has attracted an attention owing to limited metallic resources in the earth. In this study, we firstly fabricated Ti/Ir-Ru electrodes by spin coating technique for effective recovery of Cu in electrowinning process. Two different Ti/Ir-Ru electrodes were fabricated using 100 and 500 mM of precursors (i.e., Ir-Ru). SEM-EDX and AFM revealed that Ir and Ru were homogenously distributed on the surface of Ti plate by the spin coating, in particular the electrode prepared by 500 mM showed distinct boundary line between Ir-Ru layer and Ti substrate. XRD, XPS, and cyclic voltammetry also revealed that characteristics of IrO₂, RuO₂, and TiO₂ and its electrocatalytic property increased as the concentration of coating precursor increased. Finally, we carried out Cu recovery experiments using two Ti/Ir-Ru as anodes in electrowinning process, showing that both anodes showed a complete removal of Cu (1 and 10 g/L) within 6 h reaction, but much higher kinetic rate constant was obtained by the anode prepared by 500 mM. The findings in this study can provide a fundamental knowledge for surface characteristics of Ti/Ir-Ru electrode prepared by spin coating method and its potential feasibility for effective electrowinning process.

• 마이크로전자및패키징학회지
• /
• 제10권2호
• /
• pp.49-54
• /
• 2003

본 연구에서는 Pt/SrBi$_2$Ta$_2$O$_{9}$(SBT)/Si (MFS)와 Pt/SBT/Pt (MFM) 각각의 구조에서 수소 열처리에 의한 SBT박막의 물리, 전기적 영향에 대해 연구하였다. SBT 박막의 미세구조 및 전기적 특성은 수소 열처리 후에 SBT 박막의 손상으로 열화된다. 특히, Pt 전극에 의한 SBT 박막의 열화 현상을 연구하기 위해 각각 Si 와 Pt 위에 SBT 를 증착하여 같은 조건으로 열처리를 하였다. XRD, XPS, P-V, C-V 측정을 통해 Pt 전극 없이 SBT자체로도 수소 열처리 후에 열화 됨을 확인 할 수 있었다. 또한, 수소 열화현상이라고 하는 촉매 반응으로 SBT 열화 현상이 Pt로 가속화되었다. 이러한 현상을 방지하기 위해서 새로운 Ir 전극을 제안하여 $Ir/IrO_2/SBT/IrO_2$ 구조에서의 수소 열처리 전후 및 회복 열처리를 통해 SBT 박막의 전기적 특성을 연구하였다. P-V측정을 통해 SBT박막을 이용한 MFM구조에서 Ir이 열화 방지용 전극 물질로의 활용 가능성을 확인하였다.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.324-334
• /
• 2020

Tannery wastewater is known to contain high concentrations of organic compounds, pathogens, and other toxic inorganic elements such as heavy metals, nitrogen, sulfur, etc. Biological methods such as aerobic and anaerobic processes are unsuitable for tannery wastewater treatment due to its high salinity, and electrochemical oxidation offers a promising method to solve this problem. In this study, raw tannery wastewater treatment using DSA® Ti/RuO₂, Ti/IrO₂ and Ti/BDD electrodes with continuous flow systems was examined. Effects of current densities and electrolysis times were investigated, to evaluate the process performance and energy consumption. The results showed that a Ti/BDD electrode is able to reach higher treatment efficiency than Ti/IrO₂, and Ti/RuO₂ electrodes across all parameters, excluding Total Nitrogen. The main mechanism of tannery wastewater oxidation at a Ti/BDD electrode is based on direct oxidation on the electrode surface combined with the generation of oxidants such as °OH and Cl₂, while at DSA® Ti/RuO₂ and Ti/IrO₂ electrodes, the oxidation mechanisms are based on the generation of chlorine. After treatment, the effluents can be discharged to the environment after 6-12 h of electrolysis. Electrooxidation thus offers a promising method for removing the nutrients and non-biodegradable organic compounds in tannery wastewater.

• Bulletin of the Korean Chemical Society
• /
• 제5권4호
• /
• pp.167-169
• /
• 1984

Analyses of $_1$H-NMR, infrared and electronic spectral data for $[Ir(CH_2 = CHCN)(CO)(P(C_6H_5)_3)_2]ClO_4 (1)$prepared by the reaction of $Ir(OClO_3)(CO)(P(C_6H_5)_3)_2$ with $CH_2 = CHCN$, agree with the suggestion that 1 is a mixture of the nitrogen-bonded acrylonitrile complex, $[(CO)(P(C_6H_5)_3)_2Ir-NCCH = CH_2]ClO_4$ and other compound which may be the C = C ${\Pi}$ -system-bonded acrylonitrile complex, "[(CO)(P(C6H5)3)2Ir-CHCN = CH2]ClO4.

• Bulletin of the Korean Chemical Society
• /
• 제18권3호
• /
• pp.324-327
• /
• 1997

Water soluble iridium complex, IrCl(CO)(TPPTS)2·χH2O (1) (TPPTS=m-trisulfonated triphenylphosphine) has been prepared from the reaction of a water soluble complex, IrCl(COD)(TPPTS)2·6H2O (COD=l,5-cyclooctadiene) with CO and unambiguously characterized by electronic absorption, 31P NMR, 13C NMR and IR spectral data. Complex 1 catalyzes the hydration of terminal alkynes to give ketones in aqueous solutions at room temperature. The rate of PhC≡CH hydration dramatically increases with addition of MeOH to the reaction mixture in H2O, which is understood in terms of i) the excellent miscibility between H2O and MeOH and ii) the assumed catalytic hydration pathway involving the initial formation of (alkyne)IrCl(CO)(TPPTS)2.

• 청정기술
• /
• 제22권1호
• /
• pp.16-28
• /
• 2016

섬유산업은 염색폐수의 농도가 높고 방출량이 많아 고도의 공해산업으로 알려져 있다. 염색폐수에는 색도물질 뿐만 아니라 다량의 유기화합물과 불용성 물질이 섞여 있다. 합성염료 중 아조(azo) 염료는 특히 오염물질의 배출이 많은 것으로 알려져 있다. 전기화학적 폐수처리방법은 전극의 산화·환원반응에 의해 색도와 유기물 등을 처리하는 방법으로 다른 폐수처리방법들에 비해 반응기가 작고 경제적이고 간단하며 오염물제거속도가 빠르다. 본 연구에서는 diazo 화합물인 CI Direct Blue 15 염색 폐수의 전기화학적 분해특성을 연구하였다. 실험은 전극재질과 조업조건을 달리하여 그에 따른 분해효율을 알아보고자 하였으며, 탈색 효율을 향상시킬 수 있는 최적전극 재질과 조업조건을 알아보고자 하였다. 조업조건으로는 전해질 농도, 전류밀도, 반응 온도, 초기 pH의 영향을 검토하였다. 음극은 stainless steel 전극을 사용하였고, 양극은 graphite와 RuO₂/Ti, PtO₂/Ti, IrO₂/Ti를 사용하여 조업조건에 따른 각 전극의 염색폐수 분해성능 실험을 수행하였다. 그 결과 전해질의 농도와 전류밀도 증가에 따라 전기분해 효율은 증가하였다. 양극 재질에 따른 전기분해 효율은 산성 전해질 조건에서 RuO₂/Ti > PtO₂/Ti > IrO₂/Ti > graphite 순이었고 중성과 염기성에서는 RuO₂/Ti > IrO₂/Ti > PtO₂/Ti > graphite의 순으로 나타났다. 따라서 염색 폐수의 전기분해 처리에는 RuO₂/Ti와 IrO₂/Ti가 가장 효율적인 양극재질이었다.

• 한국전기전자재료학회논문지
• /
• 제13권10호
• /
• pp.859-864
• /
• 2000

Recently IR detecting devices using MEMS have been actively studied. Microbolometer, one of these devices, detects the change of resistivity as the change of temperature of the device by absorbing IR, IR absorbing materials for microbolometer should have high TCR value and low noise characteristics which depends on resistivity. We fabricated multi-layer VOx thin films to improve the IR detectivity of uncooled IR devices and analyzed IR absorbing characteristics. We fabricated multi-layer VOx thin films by RF reactive sputtering method on SiNx substrate and changed characteristics using the different thickness of V and V$_2$O$\_$5/ thin films. Then we annealed them under 300$\^{C}$. The TCR (Temperature Coefficient of Resistance) measurement was carried out to estimate the IR detectivity of multi-layer VOx thin films. XRD (X-Ray Diffraction) analysis was carried out to estimate the IR detectivity of multi-layer VOx thin films. ZXRD (X-Ray Diffraction) analysis was used to find out phases and structures of V and V$_2$O$\_$5/ thin films. AES (Auger Electron Spectroscopy) analysis was used to find out composition of multi-layer VOx thin films before and after annealing. We obtained the optimum thickness range of V and V$_2$O$\_$5/ thin films from the result of AES analysis. We changed the thickness of V$_2$O$\_$5/ about 20 to 150 $\AA$ and thickness of V about 10 to 20 $\AA$. As the result of this, TCR value of multi-layer VOx thin films was about -2%/k and the resistivity was ∼1Ωcm.

• Korean Chemical Engineering Research
• /
• 제48권2호
• /
• pp.275-282
• /
• 2010

아염소산나트륨($NaClO_2$)의 무격막 전기분해(un-divided electrolysis)에 의한 이산화염소(chlorine dioxide; $ClO_2$) 제조에서 양전극(anode) 재질에 따른 이산화염소수 발생특성을 조사하였다. 양전극으로는 $IrO_2$-coated Ti, $RuO_2$-coated Ti, DSA(dimensionally stable anode) 전극을 사용하였으며, 음전극으로는 Pt-coated Ti 전극을 사용하였다. 다양한 양전극을 사용한 무격막 전해셀(un-divided electrochemical cell) 시스템에서 이산화염소의 전구체인 아염소산나트륨 ($NaClO_2$) 농도, 전해질로 사용된 염화나트륨(NaCl) 농도 그리고 전구체 용액의 전해셀 체류시간(cell residence time;$t_R$), 전구체 용액의 초기 pH 그리고 무격막 전해셀에 공급된 전류(current; A)와 같은 운전 파라미터가 이산화염소수 발생에 미치는 영향을 조사하고 최적 운전조건을 도출하였다. $IrO_2$-coated Ti, $RuO_2$-coated Ti 그리고 DSA 양전극 시스템에서 최적 전해셀 체류시간은 각각 약 2.27, 1.52, 1.52 s, 전구체 용액의 초기 pH는 약 2.3, 최적 아염소산나트륨 농도는 $IrO_2$-coated Ti와 $RuO_2$-coated Ti 양전극 시스템이 약 0.43 g/L, DSA 양전극 시스템이 약 0.32 g/L 그리고 최적전해질 농도는 약 5.85 g/L로 나타났으며 무격막 전해셀에 공급된 최적 전류는 약 0.6 A로 나타났다. 산출된 최적 무격막 전해셀 조건에서 이산화염소수 발생을 위한 $IrO_2$-coated Ti, $RuO_2$-coated Ti 그리고 DSA 양전극 시스템의 전류효율(current efficiency; C.E.%)과 에너지 소모율(energy consumption; E.C. $W{\cdot}hr/g-ClO_2$)은 각각 약 79.80, 114.70, 70.99% 그리고 1.38, 1.03, $1.61W{\cdot}hr/g-ClO_2$로 나타났다.

• Corrosion Science and Technology
• /
• 제5권2호
• /
• pp.45-51
• /
• 2006

Properties of the anode for cathodic protection need low overvoltage for oxygen evolution and high corrosion resistance. It is well known that DSA (Dimensionally Stable Anode) has been the best anode ever since. DSA is mainly composed of $RuO_2$, $IrO_2$, $ZrO_2$, $Co_2O_3$, and also $Ta_2O_5$, $TiO_2$, $MnO_2$ are added to DSA for better corrosion resistance. The lifetime of DSA for cathodic protection is also one of the very important factors. $RuO_2$, $IrO_2$, $RhO_2$, $ZrO_2$ are well used for life extension, and many researches are focused on life extension by lowering oxygen evolution potential and minimizing dissolution of oxide coatings. This work aims to evaluate the influence of constituents of MMO and coating cycles and $ZrO_2$ coating on the electrochemical properties and lifetime of DSA electrodes. From the results of lifetime assessment in the anodes coated with single component, $RuO_2$ coating was more effective and showed longer lifetime than $IrO_2$ coating. Also, an increased coating cycle and an electrochemically coated $ZrO_2$ could enhance the lifetime of a DSA.