• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.286-291
• /
• 1998

$SrTiO_3$[ST] thin films were fabricated on $RuO_2$bottom electrodes by RF magnetron sputtering with various $Ar/O_2$ratio in sputtering gas. As the content of oxygen increases, the leakage current of ST films measured at $10^5$ V/cm decreases from $2.0{\times}10^{-6}A/{\textrm}{cm}^2(Ar/O_2=10/0)$ to $3.8{\times}10^{-7}A/{\textrm}cm^2(Ar/O_2=5/5)$, and the dielectric constant of ST films increases from $70(Ar/O_2=10/0)$ to $190(Ar/O_2=5/5)$. The improvement of electrical properties of ST films is mainly due to the structural modification of ST films such as better crystallinity, smooth surface morphology with the increase of oxygen content in the sputtering gas.

• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.238-244
• /
• 2005

IZO thin films are prepared on a corning 7059 glass substrate in a mixed gases of Ar +$O_2$ by rf-magnetron sputtering, using a powder target with a composition ratio of $In_{2}O_{3}$ : ZnO=90 : 10 $wt.\%$. Their electrical sheet resistance are strongly dependent on the oxygen concentration introduced during the deposition, a minimum resistivity of $3.7\times10^{-4}\Omega\cdot$ cm and an average transmittance over $85\%$ in the visible range are obtained in a film deposited in pure Ar gas which is close to near the stoichiometry. During the heat treatment from room temperature up tp $600^{\circ}C$ in various environments, the electrical resistance changes are explained by cyrstallizations or oxidizations of In metal and InO contained in the IZO film. The electrical properties due to oxygen adsorption and phase transitions occurring at temperatures over $40000^{\circ}C$ during heat treatment in air are also investigated.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.1-7
• /
• 2021

ε-Ga2O3, a metastable phase of Ga2O3, has excellent compatibility with substrates having a hexagonal structure or a quasi-hexagonal structure, so that a film having a relatively lower surface roughness and defect density than β-Ga2O3 can be obtained easily. Accordingly, we attempted to fabricate a high-quality β-Ga2O3 film with a low surface roughness and defect density using the property of phase transition to β-Ga2O3 when ε-Ga2O3 is annealed at a high temperature. For this, the growth of high-quality ε-Ga2O3 films must be preceded. In this study, the optimal flow rate was investigated by analyzing the structural and morphological characteristics of the ε-Ga2O3 film according to the supplied precursor ratio. In addition, the annealing condition and the effect of β-Ga2O3 mixed in the ε-Ga2O3 film on the crystallinity of β-Ga2O3 after phase transition were also investigated.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.258-262
• /
• 2000

$YMnO_3$thin films are deposited on Si(100) and $Y_2O_3/Si(100)$ substrate by radio frequency sputtering. The deposition condition of oxygen partial pressure and annealing temperature have significant influences on the preferred orientation of $YMnO_3$film and the size of memory window. The results of x-ray diffraction show that the film deposited in the oxygen partial pressure of 0% is highly oriented along c-axis after annealing at $870^{\circ}C$ for 1 hr in oxygen ambient. However, the films deposited on Si and $Y_2O_3/Si$ in the oxygen partial pressures of 20% show $Y_2O_3$ peak, the excess $Y_2O_3$ in the $YMnO_3$film suppresses the c-axis oriented crystallization. Especially memory windows of the $Pt/YMnO_3/Y_2O_3/Si$ capacitor are 0.67~3.65 V at applied voltage of 2~12 V, which is 3 times higher than that of the film deposited on $Y_2O_3/Si$ in 20% oxygen (0.19~1.21 V) at the same gate voltage because the film deposited in 0% oxygen is well crystallized along c-axis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.114-114
• /
• 2010

최근 고용량의 디커플링 캐패시터를 기판에 내장하여 고주파 발생의 원인인 배선길이와 실장 면적을 획기적으로 줄이는 임베디드 디커플링 캐패시터에 대한 연구가 활발히 진행되고 있다. 하지만 기존의 공정들은 높은 공정온도와 같은 공정상의 한계를 가지고 있어 상온 저 진공 분위기에서 세라믹 분말을 기판에 고속 분사시켜 기공과 균열이 거의 없는 치밀한 나노구조의 세라믹 제작이 가능한 후막코팅기술인 Aerosol Deposition Method (ADM)에 착목하였으며, 이 ADM을 박막공정으로 응용하여 $BaTiO_3$ 박막을 제작하고 고용량의 디커플링 캐패시터 제작을 실현하고자 한다. 하지만, Cu 기판 상에 성막 된 $0.5\;{\mu}m$이하의 $BaTiO_3$ 박막에서는 $BaTiO_3$ 분말 내에 존재하는 평균입자 보다 큰 입자와 응집분말로 인해 발생하는 pore, crater, not-fully-crushed particles와 같은 거시적인 결함들에서의 전류 통전과 울퉁불퉁한 $BaTiO_3$ 박막과 기판 사이의 계면에서의 전계의 집중에 의한 전류의 증가로 인하여 큰 누설전류 발생하는 문제에 봉착하였다. 이러한 문제를 해결하기 위하여 제시된 효과적인 방법으로 Stainless steel 기판과 같이 표면경도가 높은 기판을 사용하는 것이며, 이를 통해 $0.2\;{\mu}m$의 두께까지 유전 $BaTiO_3$ 박막을 성막 할 수 있었으며, 치밀한 표면 미세구조와 줄어든 $BaTiO_3$ 박막과 기판 사이의 계면의 거칠기를 확인하였다. 하지만, $BaTiO_3$ 박막 내에 발생하는 누설전류의 근본원인을 확인하기 위해서는 누설전류에 대한 미시적인 접근이 더욱 요구된다. 이에 본 연구에서는 누설전류 발생원인의 미시적 접근을 위해 두께에 따른 $BaTiO_3$ 박막의 누설전류 전도기구에 대한 조사하였으며, 이를 통해 $BaTiO_3$ 박막내 발생하는 누설전류의 원인은 $BaTiO_3$막 내에서 donor로서 역할을 하는 oxygen vacancy와 불균일한 전계의 집중으로 인한 전자의 tunneling 현상임을 확인할 수 있었다. 또한, Nano-indenter와 Conductive atomic force microscopic를 이용한 정밀 측정을 통해 표면경도의 중요성을 재확인하였으며 $BaTiO_3$ 박막의 두께가 $0.2\;{\mu}m$이하로 더욱 얇아지게 되면 입자간 결합 문제 또한 ADM을 박막화 하는데 있어 중요한 요소임을 확인하였다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.57-61
• /
• 2004

Zinc Oxide (ZnO) have the crystal structure of wurtzite which is semiconducting oxide with band gap energy of 3.3eV. $In_2O_3$-doped ZnO films were fabricated by electron beam evaporation at $400^{\circ}C$ and their characteristics were investigated. The content of $In_2O_3$ in ZnO films had a marked effect on the electrical properties of the films. As $In_2O_3$ content decreased. $In_2O_3$-doped ZnO films was converted amorphous into crystallized films and showed a better characteristics generally as a transparent conducting oxide. As $In_2O_3$-doped ZnO films were prepared by $In_2O_3$-doped ZnO pellet with 0.2at% of $In_2O_3$ content, the value of resistivity was about $6.0 {\times} 10^{-3} {\Omega}cm$. The transmittance was higher than 85% throughout the visible range.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.418.1-418.1
• /
• 2016

Atomic layer deposition (ALD)를 이용하여 증착된 aluminum oxide ($Al_2O_3$)는 우수한 패시베이션 특성을 가지고 있다. $Al_2O_3$ 박막은 많은 수소를 가지고 있기 때문에 화학적 패시베이션에 의한 실리콘 표면을 패시베이션 할 수 있다. 또한 $Al_2O_3$는 강한 고정전하를 가져 전계 효과 패시베이션을 할 수 있다. 따라서 $Al_2O_3$ 박막을 태양전지에 적용할 경우 높은 효율을 기대할 수 있다. 실리콘 태양전지를 제작하기 위해 소성공정(> $800^{\circ}C$)은 필수이다. $Al_2O_3$ 박막은 많은 수소를 가지고 있기 때문에 소성공정시 수소가스를 방출하여 $Al_2O_3$ 박막에 블리스터를 형성시킨다. 이 블리스터는 $Al_2O_3/Si$ 계면에서 발생하여 패시베이션 특성을 감소시킨다. 블리스터를 억제하기 위해 수소의 양을 조절할 필요가 있다. 이 실험에서는 plasma-assisted atomic layer deposition (PAALD)으로 $Al_2O_3$를 증착하였다. PAALD의 RF power를 200 W부터 800 W까지 조절하여 $Al_2O_3$ 막에 포함되는 OH의 농도를 조절하였다. $Al_2O_3$ 박막에 포함되는 OH 농도는 X-ray Photoelectron Spectroscopy (XPS)를 이용하여 분석하였다. 열처리공정 후, 화학적 패시베이션에 의한 유효 반송자 수명 (${\tau}_{eff}$) 향상이 나타났다 소성공정 후 블리스터가 형성되지 않는 조건에서 화학적 패시베이션과 전계 효과 패시베이션에 의해 ${\tau}_{eff}$가 증가하였다. 블리스터가 형성되었을 때 기존 논문들과 같이 패시베이션 특성이 감소하였다. 패시베이션 특성의 감소는 블리스터에 의한 화학적 패시베이션의 감소 때문이며 전계 효과 패시베이션은 오히려 증가하였다. 이를 통해 고온에서 열안정성을 갖는 $Al_2O_3$ 박막을 만들었으며 블리스터가 형성되지 않았고 패시베이션 특성이 증가하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1057-1061
• /
• 2007

In this study, we investigated the properties of ZnO thin films prepared by layer-by-layer method in RF magnetron sputtering system using AlAs and ZnO targets. Effects of $H_2O_2$ dip prior to thermal treatment were studied as well. Either n-type or p-type films were observed in our study depending on the annealing conditions. It thus indicates the feasibility of arbitrarily modifying the conductivity type. At the same time, it also implies the thermal instabilities of the film properties. Property measurements after stressing the films up to 144 hours showed that thermal variations of properties nay be suppressed by pre-treatment in 30% $H_2O_2$ for 1 min.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.407-410
• /
• 1998

The characteristics of $(Ba,Sr)TiO_3$[BST] thin films with the variation of $O_2/Ar$ ratio in sputtering gas deposited on $RuO_2$ bottom electrode were investigated. Dielectric constant of BST film increases from 135 to 190 with increasing oxygen partial pressure from 10 to 50, which is mainly due to the improved crystallinity of BST film. The instability of $RuO_2$ surface in $BST/RuO_2$ interface and the increase in the surface roughness of BST thin films with higher $O_2/Ar$ ratio appeared to play an important roles on the degradation of the leakage current characteristics of $Al/BST/RuO_2$ capacitor with various $O_2/Ar$ ratio in sputtering gas. As a consequence, the leakage current of BST thin film showed the lowest value of $1.9{\times}10^{-7}\; A/{\textrm}{cm}^2$ at $O_2/Ar{\approx}1/9$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.2
• /
• pp.59-65
• /
• 2006

Al-doped and F-doped ZnO (ZnO : Al & ZnO : F) thin films were coated onto glass substrate by sol-gel method. These films showed c-axis orientation in common, but different I(002)/[I(002) + I(101)] and FWHM (full width at half-maximum). In particular, the grain size of the ZnO : Al films decreased with the increase in the Al-doping concentration, while for the ZnO : F films the grain siae increased up to F 3 at% and then decreased. For the electrical properties, Hall effect measurement was used. The resistivity of the ZnO : Al films and the ZnO : F films were, respectively, $2.9{\times}10^{-2}{\Omega}cm$ at Al 1 at% and $3.3{\times}10^{-1}{\Omega}cm$ at F 3 at%. Moreover compared with ZnO:Al films, ZnO:F films have lower carrier concentration (ZnO : Al $4.8{\times}10^{18}cm^{-3}$, ZnO : F $3.9{\times}10^{16}cm^{-3}$) and higher mobility (ZnO : Al $45cm^2/Vs$, ZnO : F $495cm^2/Vs$). For average optical transmittances, ZnO : Al thin films have $86{\sim}90%$ and ZnO : F films have $77{\sim}85%$ comparatively low.