• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.10
• /
• pp.887-894
• /
• 2016

The CNG pressure vessel is manufactured by a deep drawing and ironing (D.D.I) process for forming cylinder parts, followed by a spinning process for formation of the dome part. However, studies on the buckling phenomenon of the dome part and formation of the inlet part have not been performed yet, and the CNG pressure vessel is produced by the experience of the field engineers and the trial and error method. In this study, buckling phenomenon during the spinning process was predicted by comparing critical buckling loads obtained through theoretical analysis with axial loads from the FEA, and a method for preventing buckling of the dome part was proposed by employing commercial software (Forge NxT 1.0.2). Also, to form the inlet part, forming loads of the roller at contact point between the roller and the dome part were analyzed according to radii of the dome part, and the inlet part was formed by controlling the radius of the dome part.

• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.305-310
• /
• 2018

The purpose of this study is to suggest a leisure activity for improvement of personal life and career of Korean workers. To do this, DIY was selected as a method of leisure activity that minimizes cost, time and space contraints. As a method of research, I did case study for investigating the characteristics of existing leisure activities. In addition, I examined the needs about cooking activity through an in-depth interview with 8 workers whose hobby is cooking. As a result, two essential elements were derived. First, it is necessary to establish a clear scope and content of the brand. Secondly, a platform for sharing activity is needed. This study is significant in that it suggests the way to improve leisure activity of workers. After this study, it is expected that it will help to spread leisure activities of workers through the design of leisure activities plan.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.389-395
• /
• 2016

Korean cartoons, seeking an exit from economic distress, naturally entered the era of webtoons as the Internet arose in early 2,000s. Webtoons, a new concept of cartoon, are drawn mostly by oneself, whereas cartoons before were drawn with the help of many apprentices. This research demonstrates that webtoon artists are required to use many programs and fully understand the Internet environment in order to draw webtoons. This tough conditions pose many problems for an artist who should draw well and quickly under the circumstances. We are now at a stage where a simple webtoon program is needed and will go over alternatives. I have researched characteristics, advantages and disadvantages of webtoon's core programs such as Photoshop, Comicstudio, Cytool, and Clipstudio, and what would be the optimal functions for webtoons. I offer new programs that are optimized for story cartoons that can be utilized with webtoons.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.56-63
• /
• 2015

Several fields of science have demanded large-scale workflow support, which requires thousands of CPU cores or more. In order to support such large-scale scientific workflows, high capacity parallel systems such as supercomputers are widely used. In order to increase the utilization of these systems, most schedulers use backfilling policy: Small jobs are moved ahead to fill in holes in the schedule when large jobs do not delay. Since an estimate of the runtime is necessary for backfilling, most parallel systems use user's estimated runtime. However, it is found to be extremely inaccurate because users overestimate their jobs. Therefore, in this paper, we propose a novel system for the runtime prediction based on workload-aware clustering with the goal of improving prediction performance. The proposed method for runtime prediction of parallel applications consists of three main phases. First, a feature selection based on factor analysis is performed to identify important input features. Then, it performs a clustering analysis of history data based on self-organizing map which is followed by hierarchical clustering for finding the clustering boundaries from the weight vectors. Finally, prediction models are constructed using support vector regression with the clustered workload data. Multiple prediction models for each clustered data pattern can reduce the error rate compared with a single model for the whole data pattern. In the experiments, we use workload logs on parallel systems (i.e., iPSC, LANL-CM5, SDSC-Par95, SDSC-Par96, and CTC-SP2) to evaluate the effectiveness of our approach. Comparing with other techniques, experimental results show that the proposed method improves the accuracy up to 69.08%.

• Journal of Digital Convergence
• /
• v.18 no.7
• /
• pp.215-222
• /
• 2020

The aim of this study was to develop a mobile application 'Beat Processing Device (BPD)' to record and quantify the data for the performance accuracy of rhythm production. BPD has been developed in three phases. First, we reviewed studies that used rhythm as main intervention strategy to improve cognitive functioning of older adults, and derived four basic rhythm idioms. Second, we developed an iOS-based mobile application, optimized the device, the instrument tone, and the measurement variables through preliminary test. Lastly, we tested the mobile application by comparing the performance data obtained from MIDI and BPD from 60 older adults. The device was shown to be reliable and consistent with other mode of measurement and analysis. Conclusively, BPD can be a useful tool for assessing rhythm production ability in the course of cognitive skills training.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.2
• /
• pp.57-62
• /
• 2018

In this study, we investigated the impurity effect of $Ga_2O_3$ doped thin film by simple doping method using Mg acetate solution. Both undoped $Ga_2O_3$ thin films and Mg-doped $Ga_2O_3$ thin films were grown on Si substrates at 600 and $900^{\circ}C$ for 30 minutes by means of a customized MOCVD method. As a result of the surface analysis, there were no obvious morphological differences by Mg impurity implantation. The surface of the thin film grown at $900^{\circ}C$ was rougher than those grown at $600^{\circ}C$ and polycrystallization was achieved. As a result of the optical property analysis, in the case of the doped sample, the overall emission peak was red shifted and the UV radiation intensity was increased. As a result of the I-V curve, the leakage current of the $600^{\circ}C$ growth thin film decreased by the Mg impurity and the photocurrent of the growth thin film of $900^{\circ}C$ increased.

• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.359-365
• /
• 2013

Estimate breeding value can be used as single trait animal model was developed directly using the Fortran language program. The program is based on data computed by using the indirect method repeatedly. The program develops a common algorithm and imprves efficiency. Algorithm efficiency was compared between the two programs. Estimated using the solution is easy to farm and brand the service, pedigree data base was associated with the development of an improved system. The existing program that uses the single trait animal model and the comparative analysis of efficiency is weak because the estimation of the solution and the conventional algorithm programmed through regular formulation involve many repetition; therefore, the newly developed algorithm was conducted to improve speed by reducing the repetition. Single trait animal model was used to analyze Gauss-Seidel iteration method, and the aforesaid two algorithms were compared thorough the mixed model equation which is used the most commonly in estimating the current breeding value by applying the procedures such as the preparation of information necessary for modelling, removal of duplicative data, verifying the parent information of based population in the pedigree data, and assigning sequential numbers, etc. The existing conventional algorithm is the method for reading and recording the data by utilizing the successive repetitive sentences, while new algorithm is the method for directly generating the left hand side for estimation based on effect. Two programs were developed to ensure the accurate evaluation. BLUPF90 and MTDFREML were compared using the estimated solution. In relation to the pearson and spearman correlation, the estimated breeding value correlation coefficients were highest among all traits over 99.5%. Depending on the breeding value of the high correlation in Model I and Model II, accurate evaluation can be found. The number of iteration to convergence was 2,568 in Model I and 1,038 in Model II. The speed of solving was 256.008 seconds in Model I and 235.729 seconds in Model II. Model II had a speed of approximately 10% more than Model I. Therefore, it is considered to be much more effective to analyze large data through the improved algorithm than the existing method. If the corresponding program is systemized and utilized for the consulting of farm and industrial services, it would make contribution to the early selection of individual, shorten the generation, and cultivation of superior groups, and help develop the Hanwoo industry further through the improvement of breeding value based enhancement, ultimately paving the way for the country to evolve into an advanced livestock country.

• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.379-387
• /
• 2017

The objective of this study is to develop sustainable PVA fiber-reinforced cementitious composites (FRCCs) that could exhibit comparable strength level to normal PVA FRCCs with no recycled materials. To evaluate mechanical properties of the FRCCs, compressive, flexural and direct tensile tests were conducted. In addition to the test, to calculate amount of carbon dioxide ($CO_2$) emission at the stage of manufacturing the FRCCs, life cycle inventory data base (LCI DB) were referenced from domestic and Japan. From the test results, the mechanical properties such as compressive, flexural and direct tensile strengths were decreased as the replacement ratio of recycled materials increased. And it was determined that the amount of $CO_2$ emission was reduced for the specimens with higher water-binder ratio (W/B) and replacement ratios. It was also found that binder intensity ($B_i$) value was higher as replacement ratio of fly ash (FA) increased. This result means that larger amount of FA is need to deliver one unit of a given performance indicator (1 MPa of strength) of FRCCs compared to that of ordinary portland cement (OPC). As a result, it could be concluded that FRCCs with W/B 45% replaced by FA 25% and recycled sand (RS) 25% is desirable for both target performance and $CO_2$ emission.

• Nuclear Engineering and Technology
• /
• v.41 no.7
• /
• pp.875-884
• /
• 2009

We present three nuclear/hydrogen-related R&D activities being performed at KAIST: air-ingressed LOCA analysis code development, gas turbine analysis tool development, and hydrogen-production system analysis model development. The ICE numerical technique widely used for the safety analysis of water-reactors is successfully implemented into GAMMA, with which we solve the basic equations for continuity, momentum conservation, energy conservation of the gas mixture, and mass conservation of 6 species (He, N2, O2, CO, CO2, and H2O). GAMMA has been extensively validated using data from 14 test facilities. We developed a tool to predict the characteristics of HTGR helium turbines based on the throughflow calculation with a Newton-Raphson method that overcomes the weakness of the conventional method based on the successive iteration scheme. It is found that the current method reaches stable and quick convergence even under the off-normal condition with the same degree of accuracy. The dynamic equations for the distillation column of HI process are described with 4 material components involved in the HI process: H2O, HI, I2, H2. For the HI process we improved the Neumann model based on the NRTL (Non-Random Two-Liquid) model. The improved Neumann model predicted a total pressure with 8.6% maximum relative deviation from the data and 2.5% mean relative deviation, and liquid-liquid-separation with 9.52% maximum relative deviation from the data.

• The Korea Journal of Herbology
• /
• v.35 no.1
• /
• pp.35-44
• /
• 2020

Objectives : The objective of this study was to investigate the therapeutic effect of Corni Fructus 30% ethanol extract (CFE) on the monosodium iodoacetate (MIA)-induced osteoarthritis rats. Methods : The subjects were divided into 4 groups ; Normal group (N, n=10), MIA-induced osteoarthritis control group (Con, n=10), indomethacin 5 mg/kg treated group (INDO, n=10), CFE 200 mg/kg treated group (CFE, n=10). Blood and articulation tissues were collected after two weeks of drug administration. Oxidative stress was analyzed with reactive oxygen species (ROS), peroxynitrite (ONOO-). And the Nuclear factor erythroid-2 (Nrf2), heme oxygenase-1 (HO-1), superoxide dismutase (SOD), catalase, glutathione peroxidase-1/2 (GPx-1/2), Nuclear Factor Kappa B p65 (NF-κBp65), cyclooxygenase-2 (COX-2), inducible nitric oxide synthase (iNOS), tumor necrosis factor-alpha (TNFα), interleukin-6 (IL-6), Interleukin 1β (IL-1β), matrix metalloproteinase-1 (MMP-1), and tissue inhibitor of metalloproteinases-1 (TIMP-1) were investigated by western blot. Results : The administration of CFE showed a significant reduction of changes in relative hind paw weight distribution. Reactive oxygen species (ROS) and peroxy nitrite (ONOO-) levels of articulation tissues were significantly decreased in CFE compared to the control group. Western blot measurements of Nrf2, HO-1, SOD, catalase, GPx-1/2 showed that the CFE group was increased compared to the Con group. And western blot measurements of NF-κBp65, COX-2, iNOS, TNFα, IL-6, IL-1β showed that the CFE group was reduced compared to the Con group. Also CFE group decreased MMP-1 and increased TIMP-1. Conclusion : Based on the above results, it can be seen that osteoarthritis is improved when Corni Fructus 30% ethanol extract treated.