• Journal of the Mineralogical Society of Korea
• /
• v.24 no.3
• /
• pp.179-188
• /
• 2011

In order to investigate absolute age of marine sediment in the KR5 region, northeastern Pacific, we measured the Be isotope ($^{10}Be$ and $^{9}Be$) of box core (BC08-02-13) sediment with depth. Core sediment is divided into three sedimentary facies (Facies I, Facies II, FaciesIII). Facies I mainly consists of brown to dark brown (10YR4/3) homogeneous mud with high water content. Facies II shows brownish yellow (10YR6/6) color. The unconformity is recognized at the boundary between Facies I and Facies II, Facies III consists of very dark brown (10YR2/2) mud. Many bioturbated burrows are observed at FaciesII and FaciesIII. Based on Be dating results, FaciesIII and Facies II had been deposited before 3.7 Ma and 2.3 Ma, respectively. After 2.3 Ma, the upper part of Facies II was eroded due to the change of sedimenary environment. Facies I has been deposited since 1.8 Ma. The unconformity located at the boundary between Facies I and Facies II may be driven by the envrionmental change due to the migration of Intertropical Convergence Zone.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.161-168
• /
• 2011

This paper provides the performance measurement and analysis of Wireless LAN IEEE 802.11 in a mobile environment. The performances of IEEE802.11b/g and IEEE802.11p designed for Vehicle-to-Vehicle(V2V) communication are measured and analyzed. Diameter of communication and link access time are compared under variation of speed of the vehicle.

• Journal of Environmental Science International
• /
• v.23 no.5
• /
• pp.895-902
• /
• 2014

Bacterial cellulose (BC) has played important role as new functional material for food industry and industrial products based on its unique properties. The interest in BC from static cultures has increased steadily in recent years because of its potential for use in medicine and cosmetics. In this study, we investigated culture condition for BC production by Acetobacter sp. F15 in static culture. The strain F15, which was isolated from decayed fruit, was selected on the basis of BC thickness. The optimal medium compositions for BC production were glucose 7%, soytone 12%, $K_2HPO_4$ 0.2%, $NaH_2PO_4{\cdot}_2H_2O$ 0.2%, lactic acid 0.05% and ethanol 0.3%, respectively. The strain F15 was able to produce BC at $26^{\circ}C-36^{\circ}C$ with a maximum at $32^{\circ}C$. BC production occurred at pH 4.5-8 with a maximum at pH 6.5. Under these conditions, a maximum BC thickness of 12.15 mm was achieved after 9 days of cultivation; this value was about 2.3-fold higher than the thickness in basic medium. Scanning electron micrographs showed that BC from the optimal medium was more compact than plant cellulose and was reticulated structure consisting of ultrafine cellulose fibrils. BC from the optimal medium was found to be of cellulose type I, the same as typical native cellulose.

• Composites Research
• /
• v.29 no.2
• /
• pp.45-52
• /
• 2016

An understanding of the failure mechanisms of the adhesive layer is decisive in interpreting the performance of a particular adhesive joint because the delamination is one of the most common failure modes of the laminated composites such as the fiber metal laminates. The interface between different materials, which is the case between the metal and the composite layers in this study, can be loaded through a combination of fracture modes. All loads can be decomposed into peel stresses, perpendicular to the interface, and two in-plane shear stresses, leading to three basic fracture mode I, II and III. To determine the load causing the delamination growth, the energy release rate should be identified in corresponding criterion involving the critical energy release rate ($G_C$) of the material. The critical energy release rate based on these three modes will be $G_{IC}$, $G_{IIC}$ and $G_{IIIC}$. In this study, to evaluate the fracture behaviors in the fracture mode I and II of the adhesive layer in fiber metal laminates, the double cantilever beam and the end-notched flexure tests were performed using the reference adhesive joints. Furthermore, it is confirmed that the experimental results of the adhesive fracture toughness can be applied by the comparison with the finite element analysis using cohesive zone model.

• Food Science and Preservation
• /
• v.31 no.2
• /
• pp.315-323
• /
• 2024

This study aims to confirm the anti-inflammatory activities of acemannan and aloesin, which have been studied for various efficacies at various mixed sample ratios. The mixed samples were mixed at a ratio of 1:1 (AA-1), 1:2 (AA-2), 1:3 (AA-3), 2:1 (AA-4), and 3:1 (AA-5). Seven samples were evaluated for their cytotoxic ability on macrophages, and the results showed that all cell viability was over 90% at a concentration of 100 ㎍/mL. First, due to the NO production inhibitory activity, a better inhibitory effect was achieved when using a mixed sample rather than a single material. Afterward, the activity of inhibiting the production of PGE₂, TNF-α, and IL-6 was confirmed using a mixed sample. It was confirmed that AA-2 had the best inhibitory activity on producing PGE2, TNF-α, and IL-6 rather than AA-1, AA-3, AA-4, and AA-5. For this reason, experiments were conducted using AA-2 to determine the protein expression levels of iNOS and COX-2, which are inflammation-related proteins. It was confirmed that AA-2 inhibited iNOS and COX-2 protein expression by 25.01% and 27.27%, respectively, compared to the LPS-alone treatment group. In conclusion, the mixed sample of acemannan and aloesin is judged to have anti-inflammatory activity and can potentially to be used as a functional material.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.25.2-25.2
• /
• 2011

Recently, thin film capacitors used for vehicle inverters are small size, high capacitance, fast response, and large capacitance. But its applications were made up of liquid as electrolyte, so its capacitors are limited to low operating temperature range and the polarity. This research proposes using Ni-P alloys by electroless plating as the electrode instead of liquid electrode. Our substrate has a high aspect ratio and complicated shape because of anodic aluminum oxide (AAO). We used AAO because film thickness and effective surface area are depended on for high capacitance. As the metal electrode instead of electrolyte is injected into AAO, the film capacitor has advantages high voltage, wide operating temperature, and excellent frequency property. However, thin film capacitor made by electroless-plated Ni on AAO for full-filling into etched tunnel was limited from optimizing the deposition process so as to prevent open-through pore structures at the electroless plating owing to complicated morphological structure. In this paper, the electroless plating parameters are controlled by temperature in electroless Ni plating for reducing reaction rate. The Electrical properties with I-V and capacitance density were measured. By using nickel electrode, the capacitance density for the etched and Ni electroless plated films was 100 nFcm-2 while that for a film without any etch tunnel was 12.5 nFcm-2. Breakdown voltage and leakage current are improved, as the properties of metal deposition by electroless plating. The synthesized final nanostructures were characterized by scanning electron microscopy (SEM).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1691-1699
• /
• 2014

IEEE developing WAVE specifications are able to support V2V and V2I wireless communications, and these functionalities can be used to enhance vehicle operational safety. To overcome any security weaknesses that are inherent in wireless communications, WAVE specification should support message encryption and authentication functions. In this study, we have implemented WAVE security algorithms in IEEE P1609.2 with openssl library and C language. We have verified the normal operation of implemented software, using the test vectors of related specifications, and measured their performance. Our software is platform independent, and can be used for the full implementation of WAVE specification.

• Journal of information and communication convergence engineering
• /
• v.2 no.2
• /
• pp.93-96
• /
• 2004

The a-Si:H TFT using ferroelectric of $SrTiO_3$ as a gate insulator is fabricated on glass. Dielectric characteristics of ferroelectric are superior to $SiO_2$ and $Si_{3}N_{4}$. Ferroelectric increases on-current, decreases threshold voltage of TFT and also improves breakdown characteristics. The a-SiN:H has optical band gap of 2.61 eV, retractive index of 1.8∼2.0 and resistivity of $10^{13}$~$10^{15}$ $\Omega$cm, respectively. Insulating characteristics of ferroelectrics are excellent because dielectric constant of ferroelectric is about 60∼100 and breakdown strength is over 1MV/cm. TFT using ferroelectric has channel length of 8∼20 $\mu\textrm{m}$ and channel width of 80∼200 $\mu\textrm{m}$. And it shows that drain current is 3.4$\mu\textrm{A}$ at 20 gate voltage, $I_{on}$/$I_{off}$ is a ratio of $10^5$~$10^8$ and $V_{th}$ is 4∼5 volts, respectively. In the case of TFT without ferroelectric, it indicates that the drain current is 1.5 $\mu\textrm{A}$ at 20 gate voltage and $V_{th}$ is 5∼6 volts. With the improvement of the ferroelectric thin film properties, the performance of TFT using this ferroelectric has advanced as a gate insulator fabrication technology is realized.

• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.335-341
• /
• 2017

The study evaluates user experiences of I-um and Noondate, typical Social Dating Mobile Application Service in Korea, to suggest guidelines that are more user-centered and useful. I did some literature research followed with evaluation of theoretical backgrounds, present conditions. Also, I recasted to the six principles of "Honey comb model" by Peter Morville to conduct an in-depth interview. The result indicate that I-um needs to improve accuracy of matching system by checking user's interest and detailed profile. Noondate needs to develop the cards sorting systems so that user can supervise themselves. I expect this study will become a good resource for upgrading user experiences of Social Dating Service. I also believe that this study can guide other studies about user experience in other fields.

• ETRI Journal
• /
• v.15 no.3
• /
• pp.1-26
• /
• 1994

Simulated annealing is an attractive, but expensive, heuristic method for approximating the solution to combinatorial optimization problems. Attempts to parallel simulated annealing, particularly on distributed memory multicomputers, are hampered by the algorithm's requirement of a globally consistent system state. In a multicomputer, maintaining the global state S involves explicit message traffic and is a critical performance bottleneck. To mitigate this bottleneck, it becomes necessary to amortize the overhead of these state updates over as many parallel state changes as possible. By using this technique, errors in the actual cost C(S) of a particular state S will be introduced into the annealing process. This paper places analytically derived bounds on this error in order to assure convergence to the correct optimal result. The resulting parallel simulated annealing algorithm dynamically changes the frequency of global updates as a function of the annealing control parameter, i.e. temperature. Implementation results on an Intel iPSC/2 are reported.