• Title/Summary/Keyword: $IQ-C\-\

Search Result 51, Processing Time 0.019 seconds

Study on the Synthesis of Isoquercitrin by Enzymatic Partial Hydrolysis (효소를 이용한 부분 가수분해에 의한 isoquercitrin의 합성에 관한 연구)

  • Lee, Seul Bi;Chung, Dae-Won
    • Applied Chemistry for Engineering
    • /
    • v.25 no.2
    • /
    • pp.152-156
    • /
    • 2014
  • Isoquercitrin (IQ), quercetin monoglycoside, is classified as a polyphenol, and a minute quantity of IQ is known to be present in several plants. Recently, it was reported that IQ can be prepared by the partial enzymatic hydrolysis of quercetin diglycoside (rutin, RU). In this paper, the effects of enzyme types, enzyme amounts, and substrate concentrations on the reactivity were investigated using a series of $Pecinex^{TM}$ multi-enzymes. The reaction, when a 8 ml of Ultra Clear to 1 g of RU was applied with the substrate concentration of 1% at $50^{\circ}C$, was found to be optimum, based on the reaction rate and the selectivity to IQ.

IQ Unbalance Compensation for OPDM Based Wireless LANs (무선랜 시스템에서의 IQ 부정합 보상 기법 연구)

  • Kim, Ji-Ho;Jung, Yun-Ho;Kim, Jae-Seok
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.32 no.9C
    • /
    • pp.905-912
    • /
    • 2007
  • This paper proposes an efficient estimation and compensation scheme of IQ imbalance for OFDM-based WLAN systems in the presence of symbol timing error. Since the conventional scheme assumes perfect time synchronization, the criterion of the scheme used to derive the estimation of IQ imbalance is inadequate in the presence of the symbol timing error and the system performance is seriously degraded. New criterion and compensation scheme considering the effect of symbol timing error are proposed. With the proposed scheme, the IQ imbalance can be almost perfectly eliminated in the presence of symbol timing error. The bit error rate performance of the proposed scheme is evaluated by the simulation. In case of 54 Mbps transmission mode in IEEE 802.11a system, the proposed scheme achieves a SNR gain of 4.3dB at $BER=2{\cdot}10^{-3}$. The proposed compensation algorithm of IQ imbalance is implemented using Verilog HDL and verified. The proposed IQ imbalance compensator is composed of 74K logic gates and 6K bits memory from the synthesis result using 0.18um CMOS technology.

Baseband Signal Compensation Scheme for Frequency Selective Fading Channel and RF Impairments in OFDM System (OFDM 시스템에서 주파수 선택적 페이딩 채널과 RF 불완전 변환 극복을 위한 기저대역 신호보상 기법)

  • Kim, Jae-Kil;Kim, Jeong-Been;Hwang, Jin-Yong;Shin, Dong-Chul;Ahn, Jae-Min
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.1C
    • /
    • pp.55-64
    • /
    • 2010
  • In this paper, we propose a new compensation scheme for combined channel distortions and RF impairments based on the analysis of the impacts of IQ(In-phase/Quadrature) imbalance and phase noise on the OFDM(Orthogonal Frequency Division Multiplexing) system in the direct conversion transceiver and frequency selective fading channel distortion. The proposed scheme estimates the combined distortion by the use of training symbols and the residual distortion by pilot symbols and compensates the combined distortion, including IQ imbalance, phase noise and multipath fading at the same time. The simulation results show that the proposed scheme compensates the combined distortion of IQ imbalance, phase noise and multipath fading simultaneously.

Differential Effects of Nongenotoxic and Genotoxic Carcinogen on Cell Proliferation and c-Jun Expression in the Rat Liver Initiated with Diethylnitrosamine

  • Kim, Hye-Jin;Kim, Jong-Won;Hong, Jin-Tae;Nam, Ki-Taek;Kim, Dae-Joong
    • Environmental Mutagens and Carcinogens
    • /
    • v.19 no.2
    • /
    • pp.89-94
    • /
    • 1999
  • Cell proliferation and c-Jun expression pattern in liver exposed by nongenotoxic carcinogens phenobarbital (PB) and clofibrate, and genotoxic carcinogen 2-amino-3-methylimidazo [4,5-f] quinoline (IQ) were investigated to see whether differential effects of genotoxic and non-genotoxic carcinogens on the development of neoplastic foci may be related to differential effect on cell proliferation. Male F344 rats were initially given a single intraperitioneal injection of diethylnitrosamine (200 mg/kg body weight), and 2 weeks later, animals were fed diets containing 0.03% IQ or 0.5% CE or 0.05% PB or basal diet as a control for 6 weeks. All rats were subjected to the two-thirds partial hepatectomy (PH) at week 3. Sequential sacrifice of rats was performed until 8 weeks. Cell proliferation was examined by immunohistochemical staining of bromodeoxyuridine and c-Jun expression was determined by northern blotting. The increase of cell proliferation rate after PH was significant in the rats fed 0.05% IQ and continued until 8 weeks, while the increase was not significant in the rats fed phenobarbital and clofibrate compared to that in the rats fed control diet. mRNA level of c-Jun in the liver treated with IQ was about 7 fold higher than that of control and peak at 5 hours after rH. In the liver treated with CE, mRNA level of c-Jun was 3-4 fold higher than that of control and the highest level of mRNA of c-Jun was seen at 24 hours after PH. These results show that differential effects of genotoxic and non-genotoxic carcinogens on the development of neoplastic foci may be related to differential effect on cell proliferation pattern.

  • PDF

Before/After Precoding Massive MIMO Systems for Cloud Radio Access Networks

  • Park, Sangkyu;Chae, Chan-Byoung;Bahk, Saewoong
    • Journal of Communications and Networks
    • /
    • v.15 no.4
    • /
    • pp.398-406
    • /
    • 2013
  • In this paper, we investigate two types of in-phase and quadrature-phase (IQ) data transfer methods for cloud multiple-input multiple-output (MIMO) network operation. They are termed "after-precoding" and "before-precoding". We formulate a cloud massive MIMO operation problem that aims at selecting the best IQ data transfer method and transmission strategy (beamforming technique, the number of concurrently receiving users, the number of used antennas for transmission) to maximize the ergodic sum-rate under a limited capacity of the digital unit-radio unit link. Based on our proposed solution, the optimal numbers of users and antennas are simultaneously chosen. Numerical results confirm that the sum-rate gain is greater when adaptive "after/before-precoding" method is available than when only conventional "after-precoding" IQ-data transfer is available.

New Non-linear Inverse Quantization Algorithm and Hardware Architecture for Digital Audio Codecs (디지털 오디오 코덱을 위한 새로운 비선형 역 양자화 알고리즘과 하드웨어 구조)

  • Moon, Jong-Ha;Baek, Jae-Hyun;SunWoo, Myung-Hoon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.1C
    • /
    • pp.12-18
    • /
    • 2008
  • This paper This paper proposes a new inverse-quantization(IQ) table interpolation algorithm, specialized Digital Signal Processor(DSP) instructions and hardware architecture for digital audio codecs. Non-linear inverse quantization algorithm is representatively used in both MPEG-1 Layer-3 and MPEG-2/4 Advanced Audio Coding(AAC). The proposed instructions are optimized for the non-linear inverse quantization. The proposed algorithm can minimize operational complexity which reduces total computational load. Performance comparisons show a significant improvement of average error. The proposed instructions and hardware architecture can reduce 20% of the instruction counts and minimize computational loads of IQ algorithms effectively compared with existing IQ table interpolation algorithms. Proposed algorithm can implement commercial DSPs.

Effect of Heat Treatment on Microstructure and Mechanical Properties of an Fe-6.5Mn-0.08C Medium-Manganese Steel (열처리에 따른 Fe-6.5Mn-0.08C 중망간강의 미세조직과 기계적 특성)

  • Yoon, Young-Chul;Lee, Sang-In;Hwang, Byoungchul
    • Korean Journal of Materials Research
    • /
    • v.30 no.1
    • /
    • pp.8-13
    • /
    • 2020
  • Effect of heat treatment on microstructure and mechanical properties of an Fe-6.5Mn-0.08C medium-manganese steel is investigated in this study. Three kinds of medium-manganese steel specimens are fabricated by varying heat treatments of intermediate quenching (IQ), step quenching (SQ), and intercritical annealing (IA). Hardness and tensile tests are performed to examine the correlation of microstructure and mechanical properties for the Fe-6.5Mn-0.08C medium-manganese steel specimens. The IQ and SQ specimens have microstructures of martensite matrix with ferrite, whereas IA specimen exhibits microstructure of acicular ferrite matrix with martensite. The tensile test results show that the SQ specimen with martensite matrix has the highest yield strength and the lowest elongation. On the other hand, the SQ specimen has the highest hardness due to the relatively lower reduction of carbon content in martensite during intercritical annealing. According to the fractography of tensile tested specimens, the SQ specimen exhibits a dimple and quasi-cleavage fracture appearance while the IQ and IA specimens have fully ductile fracture appearance with fine-sized dimples caused by microvoid coalescence at ferrite and martensite interface.

The design of quantization and inverse quantization unit (Q_IQ unit) module with video encoder (비디오 인코더용 양자화 및 역양자화기(Q_IQ unit) 모듈의 설계)

  • 김은원;조원경
    • Journal of the Korean Institute of Telematics and Electronics C
    • /
    • v.34C no.11
    • /
    • pp.20-28
    • /
    • 1997
  • In this paper, quantization and inverse quantizatio unit, a sa component of MPEG-2 moving picture compression system, ar edesigned. In the processing of quantization, this design adopted newly designed arithmetic units in which quantization matrices and scale code was expressed with SD(signed-digit) code. In the arithmetic unit of inverse quantization, quantization scale code, which has 5-bits length, is splited into two pieces; 2-bits for control code, 3-bits for quantization data, and the method to devise quantization step size is proposed. The design was coded with VHDL and synthesis results in that it consumed about 6,110 gates, and operating speed is 52MHz.

  • PDF

Influence of Food Ingredients on the Formation of Heterocyclic Aromatic Amine in Cooked Pork Patties

  • Shin, Han-Seung
    • Food Science and Biotechnology
    • /
    • v.14 no.5
    • /
    • pp.572-575
    • /
    • 2005
  • The effects of cooking method, cooking time and various food ingredients on the formation/ inhibition of heterocyclic aromatic amines (HAAs) in pork products were investigated. Three HAAs, 2-amino-3,8-dimethylimidazo [4,5-f] quinoxaline ($MeIQ_x$), 2-amino-3,4,8-trimethylimidazo [4,5-f] quinoxaline ($DiMeIQ_x$) and 2-amino-1-methyl-6-phenylimidazo [4,5-b] pyridine (PhIP) were measured in pork products using solid-phase extraction and HPLC. Pork patties were boiled, oven-broiled and pan-fried to internal temperatures of 71, 77 and $88^{\circ}C$. Generally, HAA concentrations increased with increasing internal temperature, and HAA formation was greatest with pan-fried. Selected food ingredients (vitamin E, sodium nitrite, sodium tripolyphosphate, sodium ascorbate, Nanking cherry tissue and cherry tissue extract) inhibited HAA formation in pork patties fried at $225^{\circ}C$ for 10 min/side, with the greater inhibition provided by cherry tissue and its methanolic extract.

A 41dB Gain Control Range 6th-Order Band-Pass Receiver Front-End Using CMOS Switched FTI

  • Han, Seon-Ho;Nguyen, Hoai-Nam;Kim, Ki-Su;Park, Mi-Jeong;Yeo, Ik-Soo;Kim, Cheon-Soo
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.16 no.5
    • /
    • pp.675-681
    • /
    • 2016
  • A 41dB gain control range $6^{th}$-order band-pass receiver front-end (RFE) using CMOS switched frequency translated impedance (FTI) is presented in a 40 nm CMOS technology. The RFE consists of a frequency tunable RF band-pass filter (BPF), IQ gm cells, and IQ TIAs. The RF BPF has wide gain control range preserving constant filter Q and pass band flatness due to proposed pre-distortion scheme. Also, the RF filter using CMOS switches in FTI blocks shows low clock leakage to signal nodes, and results in low common mode noise and stable operation. The baseband IQ signals are generated by combining baseband Gm cells which receives 8-phase signal outputs down-converted at last stage of FTIs in the RF BPF. The measured results of the RFE show 36.4 dB gain and 6.3 dB NF at maximum gain mode. The pass-band IIP3 and out-band IIP3@20 MHz offset are -10 dBm and +12.6 dBm at maximum gain mode, and +14 dBm and +20.5 dBm at minimum gain mode, respectively. With a 1.2 V power supply, the current consumption of the overall RFE is 40 mA at 500 MHz carrier frequency.