• 공업화학
• /
• 제25권2호
• /
• pp.152-156
• /
• 2014

Isoquercitrin (IQ)은 폴리페놀의 일종인 quercetin (QU)의 3번 위치에 glucose가 하나 결합해 있는 배당체로서, 천연에는 미량만이 존재하고 있다. 최근 QU의 2배당체인 rutin (RU)을 기질로 사용하여 효소에 의한 부분 가수분해에 의해 IQ를 합성할 수 있다는 것이 알려졌다. 본 논문에서는, $Pecinex^{TM}$ 계열의 복합 효소를 사용하여 RU의 선택적 가수분해에 의해 IQ를 합성하는 반응에서 최적 효소를 선정하고, 효소량 및 반응물의 농도 등의 변수에 따른 반응성을 검토하였다. 그 결과, $50^{\circ}C$에서 1%의 반응물 농도로 RU 1 g 대비 8 mL의 Ultra Clear를 사용하는 것이 반응 속도 및 IQ의 선택성 측면에서 최적인 것으로 나타났다.

• 한국통신학회논문지
• /
• 제32권9C호
• /
• pp.905-912
• /
• 2007

본 논문에서는 OFDM 기반 무선 LAN 시스템에서 긴 훈련심볼을 이용하는, 시간동기 오차의 영향이 고려된 IQ imbalance 추정 및 보상 기법을 제안한다. 기존의 긴 훈련심볼을 이용한 IQ imbalance 보상 기법은 시간동기 오차에 민감한 구조를 갖기 때문에 시간동기 오차가 필연적인 실제 시스템에서는 심각한 성능 저하를 보인다. 본 논문에서는 시간동기 오차로 인해 발생하는 위상회전을 상쇄시킬 수 있는 새로운 criterion을 정의하고, 이에 따른 IQ imbalance 추정 및 보상 기법을 제안한다. 제안된 기법은 시간동기 오차가 존재할 경우에도 IQ imbalance 의 영향을 이상적인 경우 대비 최대 0.2dB 이하로 보상할 수 있으며, IEEE 802.11a 시스템의 54Mbps 전송모드에 적용하였을 경우 기존 기법에 비해 약 4.3dB의 성능 이득을 보인다. 제안된 기법을 이용한 IQ imbalance 추정 및 보상단은 Verilog HDL을 이용하여 하드웨어 설계 및 검증 되었으며, 0.18um CMOS 공정을 이용하여 합성한 결과, 약 75K gates 와 6K bits의 메모리로 구현되었다.

• 한국통신학회논문지
• /
• 제35권1C호
• /
• pp.55-64
• /
• 2010

본 논문에서는 직접변환 RF 송수신기를 채용하는 직교주파수분할다중화(Orthogonal Frequency Division Multiplexing, OFDM) 송수신기의 IQ 불균형과 수신기의 위상잡음, 그리고 주파수 선택적 페이딩에 의한 채널 왜곡을 종합적으로 분석하여 기저대역에서 이들 왜곡을 보상하는 보상기법을 제안한다. 제안된 보상기법은 훈련심벌을 이용하여 합성 왜곡성분을 추정하는 초기 왜곡추정과 데이터 심벌에 포함되는 파일럿 심벌을 이용한 잔여 왜곡성분 추정과정을 포함하고 있으며 이들을 종합하여 합성왜곡성분을 제거한다. 시뮬레이션 결과로부터 제안된 보상기법은 IQ 불균형, 위상잡음과 주파수 선택적 페이딩 채널이 혼합된 신호왜곡을 동시에 보상할 수 있음을 확인하였다.

• 한국환경성돌연변이발암원학회지
• /
• 제19권2호
• /
• pp.89-94
• /
• 1999

Cell proliferation and c-Jun expression pattern in liver exposed by nongenotoxic carcinogens phenobarbital (PB) and clofibrate, and genotoxic carcinogen 2-amino-3-methylimidazo [4,5-f] quinoline (IQ) were investigated to see whether differential effects of genotoxic and non-genotoxic carcinogens on the development of neoplastic foci may be related to differential effect on cell proliferation. Male F344 rats were initially given a single intraperitioneal injection of diethylnitrosamine (200 mg/kg body weight), and 2 weeks later, animals were fed diets containing 0.03% IQ or 0.5% CE or 0.05% PB or basal diet as a control for 6 weeks. All rats were subjected to the two-thirds partial hepatectomy (PH) at week 3. Sequential sacrifice of rats was performed until 8 weeks. Cell proliferation was examined by immunohistochemical staining of bromodeoxyuridine and c-Jun expression was determined by northern blotting. The increase of cell proliferation rate after PH was significant in the rats fed 0.05% IQ and continued until 8 weeks, while the increase was not significant in the rats fed phenobarbital and clofibrate compared to that in the rats fed control diet. mRNA level of c-Jun in the liver treated with IQ was about 7 fold higher than that of control and peak at 5 hours after rH. In the liver treated with CE, mRNA level of c-Jun was 3-4 fold higher than that of control and the highest level of mRNA of c-Jun was seen at 24 hours after PH. These results show that differential effects of genotoxic and non-genotoxic carcinogens on the development of neoplastic foci may be related to differential effect on cell proliferation pattern.

• Journal of Communications and Networks
• /
• 제15권4호
• /
• pp.398-406
• /
• 2013

In this paper, we investigate two types of in-phase and quadrature-phase (IQ) data transfer methods for cloud multiple-input multiple-output (MIMO) network operation. They are termed "after-precoding" and "before-precoding". We formulate a cloud massive MIMO operation problem that aims at selecting the best IQ data transfer method and transmission strategy (beamforming technique, the number of concurrently receiving users, the number of used antennas for transmission) to maximize the ergodic sum-rate under a limited capacity of the digital unit-radio unit link. Based on our proposed solution, the optimal numbers of users and antennas are simultaneously chosen. Numerical results confirm that the sum-rate gain is greater when adaptive "after/before-precoding" method is available than when only conventional "after-precoding" IQ-data transfer is available.

• 한국통신학회논문지
• /
• 제33권1C호
• /
• pp.12-18
• /
• 2008

본 논문은 디지털 오디오 코덱에 효율적으로 적용 가능한 새로운 역 양자화 테이블 보간 알고리즘과 알고리즘에 특화된 DSP(Digital Signal Processor) 명령어 및 하드웨어 구조를 제안한다. 비선형 역 양자화 알고리즘은 대표적으로 MPEG-1 Layer-3와 MPEG-2/4 AAC(Advanced Audio Coding)에서 사용되며, 제안하는 명령어는 비선형 역 양자화에 최적화 되어 있다. 제안하는 알고리즘은 연산의 복잡도를 최소화하여 구현 시전체 연산량을 줄일 수 있으며, 제안된 알고리즘은 타 알고리즘에 비해 우수한 평균 오차값을 나타낸다. 제안하는 명령어 및 하드웨어 구조는 기존의 알고리즘과 비교하여 연산 과정에서 사용되는 명령어 수를 20% 정도 줄일 수 있으며, 역 양자화의 계산 부하를 효율적으로 줄일 수 있다. 제안한 알고리즘은 일반 상용 DSPEE 구현이 가능하다.

• 한국재료학회지
• /
• 제30권1호
• /
• pp.8-13
• /
• 2020

Effect of heat treatment on microstructure and mechanical properties of an Fe-6.5Mn-0.08C medium-manganese steel is investigated in this study. Three kinds of medium-manganese steel specimens are fabricated by varying heat treatments of intermediate quenching (IQ), step quenching (SQ), and intercritical annealing (IA). Hardness and tensile tests are performed to examine the correlation of microstructure and mechanical properties for the Fe-6.5Mn-0.08C medium-manganese steel specimens. The IQ and SQ specimens have microstructures of martensite matrix with ferrite, whereas IA specimen exhibits microstructure of acicular ferrite matrix with martensite. The tensile test results show that the SQ specimen with martensite matrix has the highest yield strength and the lowest elongation. On the other hand, the SQ specimen has the highest hardness due to the relatively lower reduction of carbon content in martensite during intercritical annealing. According to the fractography of tensile tested specimens, the SQ specimen exhibits a dimple and quasi-cleavage fracture appearance while the IQ and IA specimens have fully ductile fracture appearance with fine-sized dimples caused by microvoid coalescence at ferrite and martensite interface.

• 전자공학회논문지C
• /
• 제34C권11호
• /
• pp.20-28
• /
• 1997

In this paper, quantization and inverse quantizatio unit, a sa component of MPEG-2 moving picture compression system, ar edesigned. In the processing of quantization, this design adopted newly designed arithmetic units in which quantization matrices and scale code was expressed with SD(signed-digit) code. In the arithmetic unit of inverse quantization, quantization scale code, which has 5-bits length, is splited into two pieces; 2-bits for control code, 3-bits for quantization data, and the method to devise quantization step size is proposed. The design was coded with VHDL and synthesis results in that it consumed about 6,110 gates, and operating speed is 52MHz.

• Food Science and Biotechnology
• /
• 제14권5호
• /
• pp.572-575
• /
• 2005

The effects of cooking method, cooking time and various food ingredients on the formation/ inhibition of heterocyclic aromatic amines (HAAs) in pork products were investigated. Three HAAs, 2-amino-3,8-dimethylimidazo [4,5-f] quinoxaline ($MeIQ_x$), 2-amino-3,4,8-trimethylimidazo [4,5-f] quinoxaline ($DiMeIQ_x$) and 2-amino-1-methyl-6-phenylimidazo [4,5-b] pyridine (PhIP) were measured in pork products using solid-phase extraction and HPLC. Pork patties were boiled, oven-broiled and pan-fried to internal temperatures of 71, 77 and $88^{\circ}C$. Generally, HAA concentrations increased with increasing internal temperature, and HAA formation was greatest with pan-fried. Selected food ingredients (vitamin E, sodium nitrite, sodium tripolyphosphate, sodium ascorbate, Nanking cherry tissue and cherry tissue extract) inhibited HAA formation in pork patties fried at $225^{\circ}C$ for 10 min/side, with the greater inhibition provided by cherry tissue and its methanolic extract.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권5호
• /
• pp.675-681
• /
• 2016

A 41dB gain control range $6^{th}$-order band-pass receiver front-end (RFE) using CMOS switched frequency translated impedance (FTI) is presented in a 40 nm CMOS technology. The RFE consists of a frequency tunable RF band-pass filter (BPF), IQ gm cells, and IQ TIAs. The RF BPF has wide gain control range preserving constant filter Q and pass band flatness due to proposed pre-distortion scheme. Also, the RF filter using CMOS switches in FTI blocks shows low clock leakage to signal nodes, and results in low common mode noise and stable operation. The baseband IQ signals are generated by combining baseband Gm cells which receives 8-phase signal outputs down-converted at last stage of FTIs in the RF BPF. The measured results of the RFE show 36.4 dB gain and 6.3 dB NF at maximum gain mode. The pass-band IIP3 and out-band IIP3@20 MHz offset are -10 dBm and +12.6 dBm at maximum gain mode, and +14 dBm and +20.5 dBm at minimum gain mode, respectively. With a 1.2 V power supply, the current consumption of the overall RFE is 40 mA at 500 MHz carrier frequency.