• Membrane and Water Treatment
• /
• 제10권5호
• /
• pp.353-360
• /
• 2019

ZSM-5 membrane was prepared on tubular macroporous ${\alpha}$-alumina support using a different synthesis route. The effects of organic template agent and Si/Al ratio of the synthesis gel on morphology, structure, and separation performance of the ZSM-5 membrane used for dehydration of isopropanol were investigated. High water perm-selectivity ZSM-5 membrane with a thickness of about $3.0{\mu}m$ and a low Si/Al ratio of 10.1 was successfully prepared from organotemplate-free synthesis gel with a molar composition of $SiO_2$ : $0.050Al_2O_3$ : $0.21Na_2O$ : NaF : $51.6H_2O$ at $175^{\circ}C$ for 24 h. The ZSM-5 membrane exhibited high pervaporation performance with a flux of $3.92kg/(m^2{\cdot}h)$ and corresponding separation factor of higher than 10,000 for dehydration of 90 wt.% isopropanol/water mixture at $75^{\circ}C$.

• 센서학회지
• /
• 제6권1호
• /
• pp.63-71
• /
• 1997

ZnS:Mn/$ZnS:TbF_{3}$적층구조의 TFEL(thin-film eletroluminescent)소자를 제작하였으며, 이때 절연층으로 (Pb,La)$TiO_{3}$(이하PLT)와 $SiO_{2}$박막을 이용하였다. TFEL소자는 $78V_{rms}$의 문턱전압과 $100V_{rms}$의 인가전압에서 $400{\mu}W/cm^{2}$의 휘도를 나타내었다. TFEL소자의 발광스펙트럼은 450nm에서 630nm사이의 파장대를 보이고 있다. 제작된 TFEL소자는 컬러필터를 병용함으로서, 적 녹 청의 색상을 구현하는 TFEL소자로 활용할 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제28권1호
• /
• pp.41-48
• /
• 2007

Large colorless single crystals of sodium zeolite X, stoichiometry |Na80 |[Si112Al80O384]-FAU, with diameters up to 200 μm and Si/Al = 1.41 have been synthesized from gels with the composition of 2.40SiO2 : 2.00NaAlO2 : 7.52NaOH : 454H2O : 5.00TEA. One of these, a colorless octahedron about 200 μm in cross-section has been treated with aqueous 0.1 M KNO3 for the preparation of K+-exchanged zeolite X. The crystal structure of |K80|[Si112Al80O384]-FAU per unit cell, a = 24.838(4) A, dehydrated at 673 K and 1 × 10-6 Torr, has been determined by single-crystal X-ray diffraction techniques in the cubic space group Fd at 294 K. The structure was refined using all intensities to the final error indices (using only the 707 reflections for which Fo > 4σ (Fo)) R1 = 0.075 (based on F) and R2 = 0.236 (based on F2). About 80 K+ ions per unit cell are found at an unusually large number of crystallographically distinct positions, eight. Eleven K+ ions are at the centers of double 6-rings (D6Rs, site I; K-O = 2.492(6) A and O-K-O (octahedral) = 88.45(22)o and 91.55(22)o). Site-I' position (in the sodalite cavities opposite D6Rs) is occupied by five K+ ions per unit cell; these K+ ions are recessed 1.92 A into the sodalite cavities from their 3-oxygen planes (K-O = 2.820(19) A, and O-K-O = 78.6(6)o). Twety-three K+ ions are found at three nonequivalent site II (in the supercage) with occupancies of 5, 9, and 9 ions; these K+ ions are recessed 0.43 A, 0.75 A, and 1.55 A, respectively, into the supercage from the three oxygens to which it is bound (K-O = 2.36(13) A, 2.45(13) A, and 2.710(13) A, O-K-O = 116.5(20)o, 110.1(17)o, and 90.4(6)o, respectively). The remaining sixteen, thirteen, and twelve K+ ions occupy three sites III' near triple 4-rings in the supercage (K-O = 2.64(3) A, 2.94(3) A, 2.73(5) A, 2.96(6) A, 3.06(4) A, and 3.08(3) A).

• 소성∙가공
• /
• 제27권6호
• /
• pp.339-346
• /
• 2018

This study investigated the microstructure and wear properties of extruded hyper-eutectic Al-Si (15wt.%) alloy in an engine oil environment. The wear mechanism of the material was also analyzed and compared to conventional gray cast iron. In microstructural observation results of Al-15wt.%Si alloy, primary Si phase ($45.3{\mu}m$) and eutectic Si phase ($3.1{\mu}m$) were found in the matrix, and the precipitations of $Mg_2Si({\beta}^{\prime})$, $Al_2Cu({\theta}^{\prime})$ and $Al_6(Mn,Fe)$ were also detected. In the case of gray cast iron, ferrite and pearlite were observed. It was also observed that flake graphite ($20-130{\mu}m$) were randomly distributed. Wear rates were lower in the Al-Si alloy as compared to those of gray cast iron in all load conditions, confirming the outstanding wear resistance of Al-15wt.%Si alloy in engine oil environment. In the $4kg_f$ condition, the wear rate of gray cast iron was $6.0{\times}10^{-5}$ and that of Al-Si measured $0.8{\times}10^{-5}$. The microstructures after wear of the two materials were analyzed using scanning electron microscope (SEM) and electron backscatter diffraction (EBSD). The primary Si and eutectic Si of Al-Si alloy effectively mitigated the abrasive wear, and the Al matrix effectively endured to accept a significant amount of plastic deformation caused by wear.

• 한국전기전자재료학회논문지
• /
• 제12권1호
• /
• pp.18-26
• /
• 1999

In this study, the undoped amorphous layers and phosphorus doped amorphous layers are fabricated using LPCVD at 531$^{\circ}C$ with SiH$_4$ gas or at same temperature with PH$_3$ gas during deposition, respectively. The thickness of deposited amorphous layer from this experiments was 5000 ${\AA}$. In this experiments, undoped amorphous layers are deposited with SiH$_4$and Si$_2$H$\_$6/ gas in a low pressure reactor using LPCVD. These amorphous layers can be doped for poly-silicon by phosphorus ion implantation. The experiments of this study are carried out by phosphorus ion implantation with energy 40 keV into P doped and undoped amorphous silicon layers. The distribution of phosphorus profiles are measured by SIMS(Cameca 6f). Recoiling effects and two dimensional profiles are also explained by comparisions of experimental and simulated data. Finally range moments of SIMS profiles are calculated and compared with simulation results.

• 한국결정성장학회지
• /
• 제4권1호
• /
• pp.63-70
• /
• 1994

초이온도전체 ${\beta}-Ag_3SI$ 단결정을 AgI와 $AG_2S$의 혼합물을 반응시켜서 열처리하여 얻었다. 성장시킨 단결정은 직경 $200{mu}m$ 정도의 구상으로 성형시켰다. 실온에서 X-선 단결정 해석법을 이용하여 정밀한 결정구조 해석을 행했다. 이들 결정구조의 해석결과 ${\beta}-Ag_3SI$의 $Ag^+$는 6-배위의 3c자리보다 4-배위의 12h자리에 점유함이 밝혀졌다. $Ag^+$의 확률밀도분포(probabilty density function)로 부터 [110]방향에서 $Ag^+$의 one-particle potential(o.p.p.)을 계산하였다.${beta}-Ag_3SI$ 구조의(001)면에서 $Ag^+$가 확산에 필요한 활성화에너지는 0.012eV라는 것이 o.p.p.곡선에 의해 계산되었다.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.313-319
• /
• 2021

Understanding of effects of changes in the particle size of the matrix material on the mullite whisker growth during the production of porous mullite is crucial for better design of new porous ceramics materials in different applications. Commercially, raw materials such as Al₂O₃/SiO₂ and Al(OH)₃/SiO₂ are used as starting materials, while AlF₃ is added to fabricate porous mullite through reaction sintering process. When Al₂O₃ is used as a starting material, a porous microstructure can be identified, but a more developed needle shaped microstructure is identified in the specimen using Al(OH)₃, which has excellent reactivity. The specimen using Al₂O₃/SiO₂ composite powder does not undergo mulliteization even at 1,400 ℃, but the specimen using the Al(OH)₃/SiO₂ composite powder had already formed complete mullite whiskers from the particle size specimen milled for 3 h at 1,100 ℃. As a result, the change in sintering temperature does not significantly affect formation of microstructures. As the particle size of the matrix materials, Al₂O₃ and Al(OH)₃, decreases, the porosity tends to decrease. In the case of the Al(OH)₃/SiO₂ composite powder, the highest porosity obtained is 75 % when the particle size passes through a milling time of 3 h. The smaller the particle size of Al(OH)₃ is and the more the long/short ratio of the mullite whisker phase decreases, the higher the density becomes.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.281-282
• /
• 2014

본 연구는 공정시간에 따른 전해 플라즈마 공정(Electrolytic Plasma Processing, EPP) 공정에 의해 형성된 산화 코팅층의 특성 변화를 알아보고자 한다. 실험에 사용되는 전해용액은 $Na_2SiO_3$(12g/l) + $Na_2SiF_6$(0.3g/l)+NaOH(3g/l) 기본용액에 다양한 농도의 NaOH(0-5g/l) 첨가한 전해용액을 사용하였다. AZ61 마그네슘 합금을 모재($22{\Phi}{\times}10mm$)로 사용하였으며 실험은 5분-60분 동안 진행되었다. 공정시간에 변화에 따른 EPP 코팅층 특성을 측정한 결과 공정시간이 증가함에 따라 코팅층 표면의 기공 크기가 커지고 코팅층 내에 기공수가 즐어드는 것을 확인하였다. 또한 XRD 분석을 통하여 형성된 코팅층에서 MgO, Mg2SiO4 상이 나타난 것을 확인할 수 있었다.(No. 2011-0030058),(2012H1B8A2026212)

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.102.1-102.1
• /
• 2010

고효율 멀티정션박막태양전지의 바텀셀 적용을 목적으로, 반응성CVD(Reactive thermal CVD)기술을 이용, $Si_2H_6+GeF_4$를 원료가스로, 이들이 가진 산화환원반응을 이용하여 400도 이하의 저온에서 Ge 및 Si 기판에 Ge을 에피성장 시켰다. Ge 기판위의 호모에피막의 경우, $2.5{\AA}/sec$의 성장속도와 99%의 Ge조성을 보였고, RHEED 및 HR-XRD를 통한 결정성 평가 결과, 고품질의 Ge 에피막의 성장이 확인되었다. 동일한 성장조건을 Si기판에 헤테로에피성장 시켰을 경우, 4% 격자불일치에 의해 막품질이 저하되는 것을 확인하였다. 이를 개선하기 위하여 저온에서 제작한 버퍼층에 대한 논의를 하고자 한다.

• 한국환경과학회지
• /
• 제6권5호
• /
• pp.461-472
• /
• 1997

This study was carried out to investigate the characteristics of chemical components and precipitation at Kimhae area from March, 1992 to June, 1994. The pH values, concentration of soluble ions($Cl^-$, $NO_2^-}$ $NO_3^-}$, $NO_4^{2-}$-, $PO_4^{3-}$. $F^-$, $Mg^{2+}$, $Ca^{2+}$, $Mn^{2+}$, $K^+) and non-soluble metals(Cr.Si. Zn, Pb, Cu, Fe, Mn, Mg, Ad. V. Cal were measured by pH meter, IC (ion Chromatography) and ICP(Inductively Coupled Plasma). The data were analyzed by the dally. hourly distribution characteristics of acidity and chemical components, as well as the correlation between them. The results are as follows. 1. The pH range of precipitation was from 3.45 to 6.80 in Kimhae area. and average value was pH 4.62 and main chemical components were $SO_4^{2-}$, $Cl^-$, $NO_3^-$. The highest pH value and concentration appeared in initial rain, which might result from urbanlzation and industrialization in this area and long term transportation from China. 2. The hourly correction distribution of main anions related to pH value In the rainwater showed $SO_4^{2-}$ > $NO_3^-$ > $Cl^-$. Hourly concentration of heavy metal and each ion was highly correlated with pH in the precipitation.