• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.317-322
• /
• 2016

While PFOS sodium salt ($C_8F_{17}SO_3Na$) was not degraded by microorganisms for 28 days, the 4 alternatives were biodegraded at the rates of 21.6% for $C_{25}F_{17}H_{32}S_3O_{13}Na_3$, 20.5% for $C_{15}F_9H_{21}S_2O_8Na_2$, 15.8% for $C_{23}F_{18}H_{28}S_2O_8Na_2$ and 6.4% for $C_{17}F_9H_{25}S_2O_8Na_2$, respectively. The acute toxicity test using Daphnia magna was conducted for 48 hours, the half effective concentration ($EC_{50}$) of PFOS sodium salt ($C_8F_{17}SO_3Na$) was evaluated in 54.5 mg/L. While the 4 alternatives did not show any effect at 500.0 mg/L. The surface tension of the PFOS salt ($C_8F_{17}SO_3Na$) is 46.2 mN/m at a concentration of 500.0 mg/L. While the surface tension of the 4 alternatives was found to be superior to PFOS sodium salt ($C_8F_{17}SO_3Na$). The surface tension of $C_{23}F_{18}H_{28}S_2O_8Na_2$ (20.9 mN/m) has the lowest, followed by $C_{15}F_9H_{21}S_2O_8Na_2$ (23.4 mN/m), $C_{17}F_9H_{25}S_2O_8Na_2$ (27.3 mN/m), $C_{25}F_{17}H_{32}S_3O_{13}Na_3$ (28.2 mN/m). The four kinds of alternatives ($C_{15}F_9H_{21}S_2O_8Na_2$, $C_{17}F_9H_{25}S_2O_8Na_2$, $C_{23}F_{18}H_{28}S_2O_8Na_2$, $C_{25}F_{17}H_{32}S_3O_{13}Na_3$) were found to be superior to PFOS sodium salt ($C_8F_{17}SO_3Na$) in terms of biodegradation, Daphnia sp. acute toxicity and surface tension, and thus they were considered applicable as PFOS alternatives. Especially biodegradation rate of $C_{15}F_9H_{21}S_2O_8Na_2$, $C_{23}F_{18}H_{28}S_2O_8Na_2$ and $C_{25}F_{17}H_{32}S_3O_{13}Na_3$ was relatively high as 15.8~21.6%, and Daphnia sp. acute toxicity and surface tension were considerably superior (surface tension 39~55%) to PFOS sodium salt. Therefore, these alternatives are considered to be available as an alternative of PFOS.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.110-111
• /
• 2000

대기중 가스상 $H_2O_2$(Hydrogen Peroxide)는 액상 화학반응과 기상 라디칼반응사이에 연결고리의 역할을 할 뿐만 아니라, 대기중의 $SO_2$를 $H_2SO_4$로 산화시키는 산화제로서 구름, 안개, 이슬 및 빗물의 산화에 중요한 역할을 담당한다. 또한 가스상 $H_2O_2$는 연쇄종결자와 $HO_2$.(hydroperoxyl radical)농도의 지표로서 광화학 스모그에 있어 중요한 화학종이기도 하다. $H_2O_2$농도의 증가는 결국 대기의 산화율 및 속도를 증가시키고 대류권내의 액상중에서 $H_2SO_4$ 생성을 가속화시킨다는 것은 이미 잘 알려져 있는 사실이다. (중략)

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.848-852
• /
• 2005

The two important problems to solve before the industrialization of the iodine-sulfur (IS) process are (i) methods to separate $H_2SO_4$ and HI and (ii) to maintain constant components. However undesired reaction was occurred and $H_2S$ and S were formed during the Bunsen reaction. It is necessary to forbid the undesired reaction between $H_2SO_4$ and HI by separating the two acids into two different layers. The experimental conditions for the present study was chosen in such a way that to achieve the separation between the two acids and minimize the side reaction. $H_2S$ formation was reduced and the separations of the two liquids were occurred at $H_2O$ molar fraction from 0.86 to 0.909. But the separations between the two liquids were not occurred at $H_2O$ molar fraction more than 0.92.

• Journal of Radiation Protection and Research
• /
• v.31 no.3
• /
• pp.129-134
• /
• 2006

A TL pellet for a neutron dose measurement (KCT-306) by embedding a $^6Li$-compound into a $CaSO_4:Dy$ phohphor was developed based upon the technical information of KCT-300. The KCT-300 is an another kind of $CaSO_4:Dy$ TL detector shich was developed at KAERI, in which small amounts of $NH_4H_2PO_4$ have been emvedded as a binding material. This paper presented the optimized manufacturing condition of KCT-306 and compared its sensitivity with that of the commercialized neutron TL pellets. $CaSO_4:Dy$ Phosphor with grain size ranging less than $45{\mu}m$ are used for the KCT-306. The optimum $CaSO_4:Dy$ TL phosphor, $^6Li$-compounds and P-compound as the binding material are determined as 20-40wt%, 50-70wt% and 20wt%. The TL pellet combination of our KCT-306/KCT-300, TLD-600/TLD-700 and TLD-600H/TLD-700H(Harshaw) have been irradiated in the neutron/gamma mixed fields from a $D_2O$ moderated $^{252}Cf$ neutron source. The KCT-300, TLD-700 and TLD-700H were used at the same time as gamma ray discriminators in the neutron/gamma mixed fields. It was found that the neutron/gamma response ratios of KCT-306/KCT-300, which were developed in this study, were approximately 4 times higher than those of the commercial TLD-600H/TLD-700H.

• Korean Journal of Food Science and Technology
• /
• v.8 no.1
• /
• pp.33-41
• /
• 1976

These experiment were conducted to investigate the cultural condition of the lipase production by Rhizopus japonicus. The results obtained were as follows: 1. Soybean meal and ammonium sulfate were the most effective in the lipase production as organic and inorganic nitrogen sources, respectively. 2. The lipase production was strongly inhibited, when added as carbon sources xylose, glucose, fructose, galactose, maltose, soluble starch, and dextrin causing the lowering of pH of the medium during culture. Sucrose did not inhibit the lipase production, but not caused any effect when added. 3. $K_2HPO_4$ as phosphate salt and $MgSO_4{\cdot}7H_2O$ as magnesium salt were the most effective in the lipase production. 4. The addition of olive oil, soybean oil, and coconut oil respectively increased the enzyme production and especially 1% olive oil increased it by 50%. 5. The enzyme production increased slightly on the addition of yeast extract to $0.05{\sim}0.07%$. 6. The optimum composition of the medium for the lipase production by Rhizopus japonicus was in the composition of soybean meal 2%; $K_2HPO_4{\cdot}$ 0.5%; $(NH_4)_2SO_4$ 0.1%; $MgSO_4\;7H_2O$ 0.05%; yeast extract 0.05%; olive oil 1%. The maximum production of the lipase was attained by the incubation far 48hrs under the optimum incubation condition.

• Journal of Surface Science and Engineering
• /
• v.15 no.1
• /
• pp.11-18
• /
• 1982

80% Ni-Permalloy is soft magnetic material with high initial permeability and low magnetic coercive force Hc, and is used to computer memory cores and minirelays of communication e-ngineering. In this paper 80 Permalloy thin film on copper cathode was alloy-deposited from Watts so-lution contatining FeSO4$.$7H2O. The amount of FeSO4$.$7H2O in the solution, pH, temperature of the solution and plating current density were varied as parameters and the resulting comp-osition changes of deposited film were analyzed electrochemically with respect to the parame-ters. From the above procedure electroplating conditions for deposition of 80 Permalloy were est-ablished as following: 17-21 g/$\ell$ of FeSO4$.$7H2O in Watts solution, current density 1.0-2.0 Amp/dm2, pH 2.5-3.0 and temperature range of 50-60$^{\circ}C$.

• Journal of Bio-Environment Control
• /
• v.11 no.4
• /
• pp.188-192
• /
• 2002

High concentrations of HCO$_3$$^{[-10]}$ (bicarbonate ion) in hydroponic water lead to high pH and to change in solubility, and consequently inhibition of absorption of available iou. An adequate and practical method is needed to remove HCO$_3$$^{[-10]}$ in the water fur hydroponics. to compare the efficiency of HCO$_3$$^{[-10]}$ removal, the effect of injecting HNO$_3$, H$_3$PO$_4$ or H$_2$SO$_4$ was tested. Acid injection was effective to remove HCO$_3$$^{[-10]}$ Based on the assumption that an equivalent of HCO$_3$$^{[-10]}$ ion is neutralized by an equivalent of acid, KHCO$_3$ was dissolved in a double distilled water at 50, 100, 150, 200 or 250 mg.L$^{[-10]}$ concentration and either HNO$_3$, H$_3$PO$_4$ or H$_2$SO$_4$ was injected at a certain ratio, and the resulting pH change and HCO$_3$$^{[-10]}$ ion removal was measured. According to the results obtained, HCO$_3$$^{[-10]}$ in hydroponic water was titrated, and concentration of the residual HCO$_3$$^{[-10]}$ ion well correlated with the amount of acid injected.

• Current Research on Agriculture and Life Sciences
• /
• v.16
• /
• pp.45-54
• /
• 1998

A thermotolerant bacterium, Streptomyces thermocyaneoviolaceus which produced xylan-degrading enzymes, utilized excellently xylan of wheat bran by producing the enzymes in comparison with that of birchwood or oat spelts. Optimal enzyme production was achieved in WB medium containing 0.8% wheat bran, 0.06% yeast extract, 0.06% bactopeptone, 0.05% $MgSO_4{\cdot}7H_2O$, 0.05% $FeSO_4{\cdot}7H_2O$, 0.05% $KH_2PO_4$ and, 0.2% $K_2HPO_4$(pH 7.0) at $50^{\circ}C$ for 24 hrs. The optimal pH and temperature for the hydrolysis of xylan were pH 5.5 and $65^{\circ}C$, respectively. The enzyme activity was retained more than 80% at the range from pH 4.5 to pH 9.5 at $4^{\circ}C$ for 12 hrs and 94% on the heat-treatment at $65^{\circ}C$ for 1 hr. Xylobiose, xylotriose, xylose, and other xylooligosaccharides were produced as end products from hydrolysis of birchwood xylan by the xylanase of S. thermocyaneoviolceus.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1160-1164
• /
• 2013

The solid super acid catalyst $SO{_4}^{2-}$/$ZrO_2$ was prepared by impregnation method using $ZrO_2$ as the catalyst support. Catalyst forming was taken into consideration in order to separate catalyst from the mixture of cellulose acetate propionate (CAP). $Al_2O_3$ and sesbania gum powder were selected as binding agent and auxiliary agent respectively. The catalytic properties were evaluated through esterification of cellulose with acetic anhydride, propionic anhydride and characterized by XRD, FTIR and $NH_3$-TPD. In this paper, the effects of concentration of $H_2SO_4$ impregnated, calcination temperature, esterification temperature and esterification time on the yield, acyl content and viscosity of CAP were investigated. The results showed that $SO{_4}^{2-}/ZrO_2$ successfully catalyzed CAP synthesis over catalysts impregnated in 0.75 mol/L $H_2SO_4$ and calcined at $500^{\circ}C$. The yield, acetyl content and propionyl content of CAP reached the maximum value of 105.3%, 29.9% and 25.8% reacted at $50^{\circ}C$ for 8 h.

• Analytical Science and Technology
• /
• v.11 no.5
• /
• pp.341-346
• /
• 1998

2-Pyridinecarboxaldehyde thiocarbohydrazone(PyTC) have been reacted with $Cu^{2+}$ to form $[Cu(PyTC)H_2O)]SO_4$. This complex is soluble in water and polar organic solvents. The complex has been characterized by elemental analysis, conductivity, effective magnetic moment, and spectroscopic data. From the results the complex is square planar. The colorimetric determination of Cu(II) ion by using PyTC as a ligand was studied. The solution of copper(II) with PyTC was obeyed Beer's law in concentration up to $2.9{\times}10^{-4}M$ at pH 4.