• 한국식품과학회지
• /
• 제29권6호
• /
• pp.1075-1081
• /
• 1997

L-Glutamate를 간편하고 단시간에 측정할 수 있는 glutamate sensor를 개발하기 위하여, glutamate oxidase를 여러 가지 membranes에 고정화 시키는데 적합한 조건과. 그 결과로 얻은 효소 membranes의 특성, 개발한 glutamate sensor의 반응특성 및 glutamate sensor의 정확성을 조사하였다. Glutamate oxidase를 membranes에 고정화 하는데 GA 0.25%, BSA 0.3 mg, 효소 사용량 2.0 units이상이 적당하였다. 고정화 효소의 최적 pH는 6.5이었고, chitosan membrane을 사상한 경우 가장 효소활성이 높았다. 그러나 저장 안정성이나 반응시간 등을 고려하여 preactivated nylon에 고정화시킨 효소 membrane을 glutamate sensor 개발에 사용하였다. Glutamate oxidase를 선택한 membrane에 고정화시켜 효소와 glutamate의 반응산물인 암모니아가 nonactin membrane을 이용한 암모니움이온 전극에 의하여 측정되도록 효소 sensor를 구성하였으며, sensor의 반응시간은 약 2분이었다. Preactivated membrane에 고정화된 효소는 $4^{circ}C$에서 2개월간 저장중 안정한 활성을 보였으며, 이를 사용한 glutamate sensor로 약 250회 측정할 때 까지 활성에 별 변화가 없었다, 개발된 glutamate sensor의 glutamate 측정 농도범위는 $0.1{\sim}5\;mM$ 이었다. Glutamate sensor를 체더 치즈중의 L-glutamate 측정에 응용한 결과는 HPLC로 분석한 결과와 높은 상관관계가 있어, 정확성이 인정되었다.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2002년도 춘계학술대회 논문집
• /
• pp.356-360
• /
• 2002

산업의 발달과 더불어 CO, $H_2$S, S $O_2$등에 의한 대기오염이 심각해져 가스중독의 위험성이 고조되었을 뿐만 아니라, 생활수준의 향상으로 부탄(C$_4$ $H_{10}$)이나 프로판(C$_3$ $H_{8}$) 등의 폭발성 탄화수소계 가스들의 수요가 급증하는 가운데 가스폭발의 위험성이 대두되고 있다. 이에 대한 방비책으로 고감도 가스센서의 개발 뿐만 아니라 가스센서를 응용한 가스검출 및 가스식별 시스템의 개발이 시급한 실정이다. 본 연구에서는 반도체식 가스센서의 선택도에 대한 문제점을 개선하는 동시에 단일 센서신호의 드리프트에 대한 영향을 최소화하기 위해 반도체식 가스센서 어레이를 구성하고, 이로부터 검지된 가스별 입력 패턴데이터를 신경 회로망(neural network)에 적용함으로써 가스의 종류를 선택적으로 인식할 수 있는 가스인식 시스템을 개발하고자 한다.다.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1581-1586
• /
• 2006

A La (III) ion-selective membrane sensor has been fabricated from poly vinyl chloride (PVC) matrix membrane, containing 3-hydroxy-N'-(pyridin-2-ylmethylene)-2-naphthohydrazide (HPMN) as a neutral carrier, potassium tetrakis (p-chlorophenyl) borate (KTpClPB) as an anionic excluder and ortho-nitrophenyloctyl ether (NPOE) as a plasticizing solvent mediator. The effects of membrane composition and pH as well as the influence of the anionic additive on the response properties were investigated. The sensor with 30% PVC, 62% solvent mediator, 6% ionophore and 2% anionic additive, shows the best potentiometric response characteristics. It displays a Nernstian behavior (19.2 mV per decade) across the range of $1.0{\times}10^{-2}-1.0{\times}10^{-7}$ M. The detection limit of the electrode is $7.0{\times}10^{-8}$ M ($\sim$10 ng/mL) and the response time is 15 s from $1.0{\times}10^{-2}$ up to $1.0{\times}10^{-4} $M and 30 s in the range of $1.0 {\times}10^{-5}-1.0{\times}10^{-7}$ M. The sensor can be used in the pH values of 3.0-9.0 for about seven weeks. The membrane sensor was used as an indicator electrode in the potentiometric titration of lanthanum ions with EDTA. It was successfully applied to the lanthanum determination in some mouth wash preparations.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.272-272
• /
• 2014

SnO thin films, 100 nm in thickness, were deposited on glass substrates by RF magnetron sputtering. A stack structure of $SnO_2/SnO$, where few nanometers of $SnO_2$ were determined on the SnO thin film by X-ray photoelectron spectroscopy. In addition, XPS depth profile analysis of the pristine and heat treated thin films were introduced. The electrical behavior of the as-sputtered films during the annealing was recorded to investigate the working conditions for the SnO sensor. Subsequently, The NH3 sensing properties of the SnO sensor at operating temperature of $50-200^{\circ}C$ were examined, in which the p-type semiconducting sensing properties of the thin film were noted. The sensor shows good sensitivity and repeatability to $NH_3$ vapor. The sensor properties toward several gases like $H_2S$, $CH_4$ and $C_3H_8$ were also introduced. Finally, a sensing mechanism was proposed and discussed.

• International Journal of Korean Welding Society
• /
• 제2권2호
• /
• pp.51-56
• /
• 2002

The weld seam tracking system for arc welding process uses various kinds of sensors such as arc sensor, vision sensor, laser displacement sensor and so on. Among the variety of sensors available, electro-magnetic sensor is one of the most useful methods especially in sheet metal butt-joint arc welding, primarily because it is hardly affected by the intense arc light and fume generated during the welding process, and also by the surface condition of weldments. In this study, a dual-electromagnetic sensor, which utilizes the induced current variation in the sensing coil due to the eddy current variation of the metal near the sensor, was developed for arc welding of sheet metal I-butt joints. The dual-electromagnetic sensor thus detects the offset displacement of weld line from the center of sensor head even though there's no clearance in the joint. A set of design variables of the sensor was determined far the maximum sensing capability through the repeated experiments. Seam tracking is performed by correcting the position of sensor to the amount of offset displacement every sampling period. From the experimental results, the developed sensor showed the excellent capability of weld seam detection when the sensor to workpiece distance is near less than 5 ㎜, and it was revealed that the system has excellent seam tracking ability for the I-butt joint of sheet metal.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1065-1066
• /
• 2011

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.198.2-198.2
• /
• 2005

• Journal of Biosystems Engineering
• /
• 제32권5호
• /
• pp.348-353
• /
• 2007

A solid state ion sensor module has been developed and evaluated for hydroponic nutrients analysis. The sensor module consisted of five ion-selective electrodes (ISE) fabricated by screen-printing technology. The electrochemical responses of ion sensors for nitrate, ammonium, potassium, calcium, and pH were measured with specially designed 7-channel low voltage signal transducers. The analytical characteristics of the sensors were comparable with those of conventional ISE sensors. The solid state ion sensors exhibit linear relationships over five concentration decades. Detection limit of the sensors were $5.6{\times}10^{-5}{\sim}1.6{\times}10^{-7}M$ depends on ions. Performance test results showed that relative errors of measured ion concentrations were less than 5% for $NO_3{^-},\;K^+,\;Ca^{2+}$ ion, and pH. The concentration of $NO_3{^-},\;NH_4{^+},\;K^+,\;Ca^{2+}$, and pH ion in standard solution and nutrient solutions could be determined by direct potentiometric measurements without any conditioning before measurements.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1992년도 춘계학술대회
• /
• pp.203-208
• /
• 1992

In order to restore the gait function by functional electrical stimulation(FES) in hemiplegic patients, an electrical stimulator and foot sensor were developed on the basis of optimal parameters which resulted from animal experiments. Physical properties of the soleus muscle were quite different from those of themedial gastrocnemius muscle, that is, the former had a characteristic or slow muscle and the letter had a characteristic of fast muscle in rats. Optimal parameters for electrical stimulation were 0.2ms of pulse width and 20Hz of frequency in the soleus muscle and 0.3ms, 40Hz in the medial gastrocnemius muscle. Amplitude modulated electrical stimulator with -15V of maximal output was made and automatic on-off time if the stimulator was 5 seconds. The foot sensor composed of 3 sensors in 3 pressure points of the foot was made in order to control the gai t function by closed loop feedback system. The gait function was improved by using the stimulator and foot sensor in peroneal palsy. These results suggest that the electrical stimulator with closed loop feedback system may restore the gait function in hemiplegic patients.

• 전기학회논문지
• /
• 제59권9호
• /
• pp.1621-1625
• /
• 2010

Recently, due to increase in the usage of toxic gas and inflammability gas, the ability to monitor and precisely measurement of these gases is crucial in preventing the occurrence of various accidents. CuO doped and undoped $WO_3$ thick films gas sensors were prepared using screen-printing method on alumina substrates. A structural properties of $WO_3$:CuO thick films had monoclinic phase and triclinic phase of $WO_3$ together. Sensitivity of $WO_3$:CuO sensor at 2000 ppm of $CO_2$ gas and 50 ppm of $H_2S$ gas was investigated. 4 wt% Cu doped $WO_3$ thick films had the highest sensitivity of $CO_2$ gas and $H_2S$ gas.