• Korean Journal of Ecology and Environment
• /
• v.44 no.1
• /
• pp.75-84
• /
• 2011

We examined the effect of the turbid water on the periphytic diatom community in an artificial stream system. The artificial stream was constructed with transparent acryl and composed of four channels. Each channel ($20\;cm{\times}200\;cm{\times}40\;cm$) was supplied continuously with eutrophic lake water. In order to the freely colonize and grow diatoms, artificial substrate was installed with commercial slide glass soaked in 1% agar. Prior to introducing turbid water, the artificial stream was operated with lake water for 6 days to permit the propagation of diatom community on the substrates. The turbid water prepared with sediment sieved with ${\varphi}$ $64\;{\mu}m$ at $2\;g\;L^{-1}$ (final concentration, 300 NTU) was provided daily for 50 minute duration. The experiment was conducted for 7 days with manipulated experimental condition of light ($50{\sim}80\;{\mu}mol\;m^{-2}s^{-1}$, light:dark=24:0), temperature ($10{\pm}1^{\circ}C$), and flow rate ($0.31\;cm\;s^{-1}$). Sampling and analysis were conducted daily for water quality and diatom. Turbidity of the water varied 162.2~173.2 NTU during the experiment. After introduction of turbid water, DO, pH and TN were decreased, while SS and TP increased significantly. A total of 14 genera and 47 species of diatoms was observed on the artificial substrates during the experimental period. Of these, Navicula appeared to be a most dominant genus with 10 species, followed by Cymbella (6 species), Fragilaria (6 species) and Gomphonema (5 species). Achnanthes minutissima was the most dominant species (>70% of total frequency) in both control and treatment experiments. Increase in diatom abundance lasted for three days since turbid water introduction, after that they gradually decreased by the termination of the experiment. These results suggest that frequent supply of highly-concentrated turbid water significantly decreases the periphytic diatom community, and retard the recovery of the stable food-web within the stream.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.8
• /
• pp.866-871
• /
• 2006

The nutrient recovery in phosphate crystallization process was investigated by using laboratory scale uptlow reactors, adopting sequencing batch type configuration. The industrial waste lime was used as potential cation source with magnesium salt($MgCl_2$) as control. The research was focused on its successful application in a novel integrated sludge treatment process, which is comprised of a high performance fermenter followed by a crystallization reactor. In the struvite precipitation test using synthetic wastewater first, which has the similar characteristics with the real fermentation effluent, the considerable nutrient removal(about 60%) in both ammonia and phosphate was observed within $0.5{\sim}1$ hr of retention time. The results also revealed that a minor amount(<5%) of ammonia stripping naturally occurred due to the alkaline(pH 9) characteristic in feed substrate. Stripping of $CO_2$ by air did not increase the struvite precipitation rate but it led to increased ammonia removal. In the second experiment using the fermentation effluent, the optimal dosage of magnesium salt for struvite precipitation was 0.86 g Mg $g^{-1}$ P, similar to the mass ratio of the struvite. The optimal dosage of waste lime was 0.3 g $L^{-1}$, resulting in 80% of $NH_4-N$ and 41% of $PO_4-P$ removal, at about 3 hrs of retention time. In the microscopic analysis, amorphous crystals were mainly observed in the settled solids with waste lime but prism-like crystals were observed with magnesium salt. Based on mass balance analysis for an integrated sludge treatment process(fermenter followed by crystallization reactor) for full-scale application(treatment capacity Q=158,880 $m^3\;d^{-1}$), nutrient recycle loading from the crystallization reactor effluent to the main liquid stream would be significantly reduced(0.13 g N and 0.19 g P per $m^3$ of wastewater, respectively). The results of the experiment reveal therefore that the reuse of waste lime, already an industrial waste, in a nutrient recovery system has various advantages such as higher economical benefits and sustainable treatment of the industrial waste.

• ALGAE
• /
• v.20 no.2
• /
• pp.167-176
• /
• 2005

In order to produce Laminaria japonica in Jeju as feed for abalone, a transplant experiment was performed with the Baekryungdo and the Wando cultivar stocks at the Udo aquafarm from January to July 2003. Eight water conditions at the aquafarm and eleven traits of the two cultivar stocks were measured once a month. The water temperature ranged from 12.9$^{\circ}C$ to 23.5$^{\circ}C$. The salinity was 31.3-36.8‰ the DO was 5.40-9.86 mg ${\cdot}$ $l^{-1}$ the pH was 7.82-9.61. Concentrations of $NO_2-N,\;NO_3-N,\;NH_4-N\;and\;PO_4-P$ were 0.02-0.15 $\mu$M, 2.27-3.49 $\mu$M, 0.16-0.56 $\mu$M and 0.07-0.99 $\mu$M, respectively. The whole frond length of the Baekryungdo and the Wando specimens were 173.84 and 153.67 cm. The blade width, stipe length, blade length, fascia length, blade thickness, total weight and substantiality of the Baekryungdo and the Wando specimens were 14.61 and 13.05 cm, 3.94 and 3.02 cm, 169.88 and 150.65 cm, 155.81 and 137.10 cm, 1.01 and 0.96 cm, 258.04 and 200.96 cm, and 101.56 and 94.62, respectively at the conclusion of the experiment in July. The measurements of the Baekryungdo specimens were slightly higher than those of Wando specimens. The fascia width, stipe thickness and fascia thickness of the Wando specimens were slightly higher than those of the Baekryungdo specimens. The relative growth rates of these traits of two cultivar stocks during the growth test were very similar. Generally, the performance of the Baekryungdo cultivar stock seems to be better than that of the Wando samples. Further study of the physiological ecology for cultivation and breeding is needed in the future.

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.681-689
• /
• 2023

Purpose: Muons are characterized by a strong penetrating ability and can travel through thousands of meters of rock, making them ideal to image large volumes and substances typically impenetrable to, for example, electrons and photons. The feasibility of 3D image reconstruction and material identification based on a cosmic ray muons tomography (MT) system with triangular bar plastic scintillator detectors has been verified in this paper. Our prototype shows potential application value and the authors wish to apply this prototype system to 3D imaging. In addition, an MT experiment with the same detector system is also in progress. Methods: A simulation based on GEANT4 was developed to study cosmic ray muons' physical processes and motion trails. The yield and transportation of optical photons scintillated in each triangular bar of the detector system were reproduced. An image reconstruction algorithm and correction method based on muon scattering, which differs from the conventional PoCA algorithm, has been developed based on simulation data and verified by experimental data. Results: According to the simulation result, the detector system's position resolution is below 1 ~ mm in simulation and 2 mm in the experiment. A relatively legible 3D image of lead bricks in size of 20 cm × 5 cm × 10 cm used our inversion algorithm can be presented below 1× 10⁴ effective events, which takes 16 h of acquisition time experimentally. Conclusion: The proposed method is a potential candidate to monitor the cosmic ray MT accurately. Monte Carlo simulations have been performed to discuss the application of the detector and the simulation results have indicated that the detector can be used in cosmic ray MT. The cosmic ray MT experiment is currently underway. Furthermore, the proposal also has the potential to scan the earth, buildings, and other structures of interest including for instance computerized imaging in an archaeological framework.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.362-371
• /
• 2012

Objective of this research was to secure the information on physical and chemical properties of peatmoss and coir dust. To achieve this, 6 kinds of peatmoss and 10 kinds of coir dust currently used in the country as the root medium components in plant factories were collected and analysed. The mean ${\pm}$ standard deviation (SD) of total porosity and container capacity in peatmoss and coir dust were $79.6{\pm}5.04$ and $83.6{\pm}6.18%$, and $69.9{\pm}10.17$ and $65.9{\pm}3.46%$, respectively. These indicate that peatmoss has higher water holding capacity than coir dust and the characteristics are highly varied among peatmoss. The 4 out of 5 kinds of peatmoss had lower than 10%, but coir dust had 12~26%, of air-filled porosity. The percentage of easily available water and buffering water in peatmoss and coir dust was 18~22 and 11~16% and 9~13 and 5.5~7.5%, respectively. These results indicate that precise irrigation is required when coir dust is used as the root medium. The ranges of pH and electrical conductivity (EC) were 3.46~4.17 and $0.137{\sim}0.253dS{\cdot}m^{-1}$ in peatmoss and 5.31~6.48 and $0.250{\sim}0.1.580dS{\cdot}m^{-1}$ in coir dust. However, $0.563{\pm}0.83dS{\cdot}m^{-1}$ in mean ${\pm}$SD of coir dust EC indicates that it is higher than that of peatmoss, and the coir dust are highly varied in EC. The cation exchange capacity of peatmoss was 3 to 4 times as high as that of coir dust. The coir dust had higher $NO_3$ and $PO_4$ and lower $NH_4$ than peatmoss. The K and Na concentrations in coir dust were extremely high indicating that these ions caused the rising in EC. The percentage of hot water and alkali extracts of peatmoss were 6.67~16.37 and 0~38%, whereas those of coir dust were 30.0~65.1 and 23.1~70.3%. These results mean that possible existence of growth inhibiting materials in coir dust.

• Resources Recycling
• /
• v.12 no.3
• /
• pp.13-24
• /
• 2003

The production characteristics of activated carbon from waste walnut shell have been investigated by taking activation temperature, activation time, amount of activating agent, and kind of activating agent as the major influential factors. The adsorption capacity of the activated carbon which was produced using phosphoric acid as the activating agent increased with activation temperature and showed its greatest value at about $550^{\circ}C$. Yield for activated carbon was observed to decrease continuously as the activation temperature was raised. The optimal activation time for the highest adsorption capacity was found to be about 2 hr, and as the activation time increased the yield for activated carbon was showed to decrease continuously. The increase in the amount of activating agent resulted in the increase of the yield for activated carbon, however, excessive amount of activating agent deteriorated its adsorption capacity reversely. The variations of the microstructure of activated carbon observed by SEM with several influential factors, correlated very well with its changes in the adsorbability with the same factors and the kind of activating agent was found to play an important role in the determination of the adsorption capacity of activated carbon. To investigate the adsorption characteristics of the produced activated carbon, the adsorption reactions of $Cu^{2+}$ ion were examined using the produced activated carbon as the adsorbent. In general, the kinetics of the adsorption of $Cu^{2+}$ ion was observed to follow a 2nd-order reaction and the rate constant for adsorption reaction increased as the initial concentration of adsorbate was diminished. The equilibrium adsorption of $Cu^{2+}$ was explained well with Freundlich model and its adsorption reaction was found to be endothermic. The activation energy for adsorption was calculated to be 13.07 kcal/mol, which implied that the adsorption reaction was very irreversible, and several thermodynamic parameters of adsorption reaction were estimated using van't. Hoff equation and thermodynamic relationships.

• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.14-18
• /
• 2004

Analysis methods of artificial sweeteners, aspartame, acesulfame potassium, sodium saccharin, and sucralose isolated from foods were developed using high performance liquid chromatography, HPLC conditions for aspartame, acesulfame potassium, and sodium saccharin were: column, Symmetry $C_{18}(3.9mm\;i.d{\times}150mm,\;5{\mu}m)$; mobile phase, 0.05M sodium phosphate monobasic : acetonitrile (9 : 1, pH 3.5, containing 0.01M tetrapropylammonium hydroxide); detector, UV detector at 210 nm. HPLC condition for sucralose were : column, Symmetry $C_{18}(3.9mm\;i.d{\times}150mm,\;5{\mu}m)$; mobile phase, water:methanol (7 : 3); detector, refractive index detection (sensitivity = 16). Recoveries of artificial sweeteners in foods including soft drinks, fruit and vegetable beverages, alcoholic beverages, fermented milk beverages, soybean milk, ice cream, snacks, chewing gums, jam, honey, kimchi salted food, special dietary products, processed fish products, candies, food additive mixtures, chocolate and cocoa were 76.1-101.3%, 82.3-103.2%, 83.1-103.7%, and 80,6-99.5% for aspartame, acesulfame potassium, sodium saccharin, and sucralose, respectively.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.215-215
• /
• 2017

The preference for domestic cereal crop of Setaria Italica has been increased with the recent interest in healthy foods. However, the productivity of Korean domestic produce, which has been decreasing due to the lack of cultivation technology and the low rate of mechanization during cultivation. Increase of germination ability will have a positive effect on the cultivation by reducing the labor of the manpower consuming and weeding work. Therefore, red light, ultrasonication, liquid priming and liquid smoke treatment that are effective for the germination of the seeds evaluated. The seeds of 1.4mm or more were used for the experiment. The priming solution used in the experiment was 1% $KH_2PO_4$ (74mM). During the priming, the light treated seeds at 2000 lux for 15, 30, 60 and 120 minutes. Ultrasonicationd treatment was performed for 5, 10, and 20 minutes at exposures of 60%, 80%, and 100% of ultrasound up to 21.6 kHz during priming. Light or ultrasound treated seeds transferred to priming treatment at $15^{\circ}C$ for 24 hours. The treatment of the liquid smoke was divided into the treatment of the liquid smoke alone and the treatment of the liquid smoke with the priming. The liquid smoke alone was diluted with distilled water without priming solution and the treatment of the liquid smoke was diluted with the salt priming solution. Both treatments were performed at 0.0%, 0.5%, 1.0%, 5.0%, and 10.0% of the liquid smoke (pH7) concentration at $15^{\circ}C$ for 6 hours. After each treatment, the seeds were dried to moisture content ranged 5-8% at $25^{\circ}C$ for 24 hours. All treatments showed better results than the non-treated control. Light treatment for 120 minutes improved for germination percentage (GP), Germination uniformity (GU) and heath seed percentage (HS). Ultrasonication treatment was most effective when treated with ultrasound at 21.6 kHz for 5 minutes in all germination characteristics. Ten % of the liquid smoke increase in 92% GP, 1.8 days MGT, $54%{\cdot}day^{-1}GR$, 0.76 GU and 88% HS comparing to non-treated control (72% GP, 2.3 days MGT, $45%{\cdot}day^{-1}GR$, 1.48 GU, and 63 % HS). This study showed that it is possible to obtain high germination by adding liquid smoke treatment to the seeds supplied to the farmers. The efficacy of light, ultrasonication, inorganic salt priming, and liquid smoke treatment on the seeds found in the experiment will be a positive alternative to labor force problems in the cultivation by improving germination.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.263-268
• /
• 2002

Bacillus polyfermenticus SCD, which is commonly called a 'Bisroot' strain, has been appropriately used for the treatment of long-term intestinal disorders, since the live strains, in the form of active endospores, can successfully reach the target intestine. Goal of this study was to develop an industrial medium for growth and sporulation of B. polyfermenticus SCD. From the results of effect of mixed carbon sources on growth and sporulation of B. polyfermenticus SCD, glucose 2% and starch 2% was particularly found to be the most effective for the maximum number of spore production, resulting in spore cells of $4.3{\times}10^9\;spores/mL$ with a sporulation yield of 91%. For the effect of nitrogen sources, the maximum spore cells of $5.7{\times}10^9\;spores/mL$ of B. polyfermenticus SCD with a sporulation yield of 97% was obtained when B. polyfermenticus SCD was cultivated in an optimum nitrogen source medium containing 5% soybean flour. A medium involving proper phosphate salt yielded the maximum number of a spore cells of $6.0{\times}10^9\;spores/mL$ with a sporulation yield of 95%. Finally, the efficacy of an industrial medium (KH5 medium) on growth and sporulation of B. polyfermenticus SCD was investigated in jar fermenter. The higher number of viable cells $(3.3{\times}10^{10}\;cells/mL)$ and spore cells $(3.0{\times}10^{10}\;spores/mL)$ were obtained in 5 L fermenter when compared with a 500 mL baffle flask cultivation. Thus, KH5 medium developed in this study shows promise as an industrial medium because of higher cells and sporulation yield.

• Food Science and Preservation
• /
• v.12 no.6
• /
• pp.600-607
• /
• 2005

This study was conducted to prepare high quality grape seed oils by solvent extraction and chemical refining process. Additionally, quantitative analysis of several functional components in grope seed was carried out to compare quality characteristics of grape seeds from grapes grown by conventional and organic agricultural practices. There are no significant differences in several functional constituents of grape seeds between conventionally cultivated- and organically cultivated-grapes, although some functional compositions of grape seeds are different between two cultivation methods. The dried grape seed was pretreated with roasting heating for 5 min, milled and then extracted twice with n-hexane under reflux at $50^{\circ}C$ for overnight, followed by filtration and evaporation. The crude grape seed oil was successively purified by degumming with $0.1\%\;H_3PO_4$, deaciding with $20\%\;NaOH$, and then decoloring and deodorization by a steam distillation, and thereby producing purified grape seed oil(yield: $5.0\%/dried$ grape seed). Physicochemical characteristics of the purified grape seed oil were comparable to those of the imported grape seed oils.