• Korean Journal of Food Science and Technology
• /
• v.42 no.5
• /
• pp.549-553
• /
• 2010

Yeast strains with good sensory properties were selected, and those yeasts were subjected to mutation to develop high glutathione producing yeasts. In addition, the antiradical activity and flavoring effect of the yeast extract were evaluated. A total of 68 strains were screened, and three strains of Saccharomyces utilis, four strains of Candida utilis, and one strain of Zygosaccharomyces rouxii were selected based on the flavoring effect. Among them, a random mutation was elicited against SEM-Y8, resulting in a high flavoring effect and growth rate. The glutathione production by SEM-Y8 increased 2.0-fold following the mutation, and the DPPH radical quenching effect of the SY8-M2-1-derived extract increased 3.2-fold compared to that of the wild type. The sensory properties of the SY8-M2-1-derived extract were better than those of garlic or onion extract in umami and mouthfulness. Thus, the SY8-M2-1 extract could be used as a functional flavoring material with improved antiradical activity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.30-30
• /
• 2020

본 연구에서는 여름철에 농업용수(벼농사용)로서 집중적으로 지하수를 사용하는 지역에서 시기별 지하수 사용에 따른 지하수 수질변화를 평가하기 위해 수행되었다. 연구지역은 충남 홍성군 양곡리와 신곡리 일부를 포함하는 면적 2.83 ㎢(283.3 ha)에 해당하는 지역이다. 연구지역 지하수 수질의 공간적 분포 및 시간적 변화 특성 평가를 위하여 2019년 2회(7월, 10월)에 걸쳐 지하수 관정(21개소)에 대하여 조사 및 분석을 수행하였다. 지하수 샘플은 현장에서 온도(T), pH, 용존산소(DO) 및 전기전도도(EC), 산화환원전위(Eh) 등을 측정하였고, 실험실에서 주요 양이온 및 미량원소(Ca, Mg, Na, K, Si, Sr), 음이온(F, Cl, Br, NO₂, NO₃, PO₄, SO₄), 알칼리도, 용존 유기탄소(DOC)와 용존 유기물(DOM) 등을 분석하였다. 지하수 수질조사 결과, 전체의 14~15개소(67~71%)가 Ca-HCO₃ 유형으로 분류되었으며, 다음으로는 Ca-Cl 유형이 4~5개소(19~24%)가 관찰되었다. 얕은 심도의 관정에서 상대적으로 심도가 깊은 관정보다 대부분 성분(TDS, Ca, Mg, Na, K, Cl, SO₄, HCO₃, DOC)에서 높은 농도를 나타내었다. 지하수의 수질자료를 이용하여 다변량통계분석법인 주성분분석(PCA: Principal Components Analysis)과 계층적 군집분석(HCA: Hierachical Cluster Anlaysis)를 수행한 결과, 초기 3개 주요 고유성분(eigenvalue)는 PC1 54.0%, PC2 14.2%, PC3 12.3%로 전체 분산의 88.3%를 설명할 수 있었다. PC1은 Ca, Mg, Na, K, Cl, SO₄, DOC가 주요한 영향 인자였으며 PC2는 HCO₃, NO₃, DO에 영향 받음을 확인하였다. 계층적 군집분석 결과, 연구지역 지하수는 Na-Cl 유형의 C-3 관정을 제외하고는 크게 두 그룹으로 구분되어 졌다. 다변량통계분석의 결과에서도 수리지화학, 동위원소, 용존유기물 등의 특성에서 나타나는 것과 유사한 연구지역의 수질특성을 확인할 수 있었다. 연구지역은 차시기 동안 수질변화는 일부 관정을 제외하고는 유의할 만한 수준으로 관찰되지는 않았고, 지하수 사용에 따른 지하수위 회복도 빠르게 진행되고 있는 것으로 나타났다.

• Korean Journal of Ecology and Environment
• /
• v.36 no.3 s.104
• /
• pp.235-241
• /
• 2003

The effect of ultraviolet (UV) radiation on the characteristics of algae-derived dissolved organic matter (DOM) was examined by comparing the biodegradability and DOM fraction distribution of algal DOM before and after UV exposure. Algal DOM from two axenic cultures of Microcystis aeruginosa and Oscillatoria agardhii were irradiated for 24 h at a UV intensity of 42 W/$m^2$. A complete degradation of algal DOM during the UV exposure did not occur, remaining at constant concentrations of dissolved organic carbon(DOC). After UV exposure, however, microbial degradations were reduced by 17% in M. aeruginosa and 53% in O. agardhii, respectively, and decomposition rates also were two times lower in UV exposed algal DOM. In addition, the chemical compositions of algal DOM altered substantially after UV radiation exposure. The proportions of hydrophilic bases (HiB; protein-like DOM) decreased considerably in both algal DOM sources after UV exposure (16.8% and 20.0% of DOM, respectively), whereas those of hydrophilic acids (HiA; carboxylic acids-like DOM) increased as much as the decrease of the HiB fraction. Capillary ion electrophoresis (CE) analysis showed that several carboxylic acids increased significantly after UV exposure, further confirming an increase in HiA fractions. The results of this study clearly indicate that algal DOM can be changed in its chemical composition as well as biodegradability without complete degradation by UV radiation.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.39-46
• /
• 2015

Objective of this research was to investigate the influence of compositions and concentrations of fertilizer solutions on the vegetative growth and nutrient uptake of 'Seolhyang' strawberry. To achieve this, the solutions of acid fertilizer (AF), neutral fertilizer (NF), and basic fertilizer (BF) were prepared at concentrations of 100 or $200mg{\cdot}L^{-1}$ based on N and applied during the 100 days after transplanting. The changes in chemical properties of the soil solution were analysed every two weeks, and crop growth measurements as well as tissue analyses for mineral contents were conducted 100 days after fertilization. The growth was the highest in the treatments with BF, followed by those with NF and AF. The heaviest fresh and dry weights among treatments were 151.3 and 37.8 g, respectively, with BF $200mg{\cdot}L^{-1}$. In terms of tissue nutrient contents, the highest N, P and Na contents, of 3.08, 0.54, and 0.10%, respectively, were observed in the treatment with NF $200mg{\cdot}L^{-1}$. The highest K content was 2.83%, in the treatment with AF $200mg{\cdot}L^{-1}$, while the highest Ca and Mg were 0.98 and 0.42%, respectively, in BF $100mg{\cdot}L^{-1}$. The AF treatments had higher tissue Fe, Mn, Zn, and Cu contents compared to those of NF or BF when fertilizer concentrations were controlled to equal. During the 100 days after fertilization, the highest and lowest pH in soil solution of root media among all treatments tested were 6.67 in BF $100mg{\cdot}L^{-1}$ and 4.69 in AF $200mg{\cdot}L^{-1}$, respectively. The highest and lowest ECs were $5.132dS{\cdot}m^{-1}$ in BF $200mg{\cdot}L^{-1}$ and $1.448dS{\cdot}m^{-1}$ in BF $100mg{\cdot}L^{-1}$, respectively. For the concentrations of macronutrients in the soil solution of root media, the AF $200mg{\cdot}L^{-1}$ treatment gave the highest $NH_4$ concentrations followed by NF $200mg{\cdot}L^{-1}$ and AF $100mg{\cdot}L^{-1}$. The K concentrations in all treatments rose gradually after day 42 in all treatments. When fertilizer concentrations were controlled to equal, the highest Ca and Mg concentrations were observed in AF followed by NF and BF until day 84 in fertilization. The BF treatments produced the highest $NO_3$ concentrations, followed by NF and AF. The trends in the change of $PO_4$ concentration were similar in all treatments. The $SO_4$ concentrations were higher in treatments with AF than those with NF or BF until day 70 in fertilization. These results indicate that compositions of fertilizer solution should to be modified to contain more alkali nutrients when 'Seolhyang' strawberry is cultivated through inert media and nutri-culture systems.

• Fisheries and Aquatic Sciences
• /
• v.26 no.8
• /
• pp.470-481
• /
• 2023

Algal overgrowth in shrimp culture ponds can affect the quality of the aquatic environment, thereby adversely affecting the shrimp and causing economic losses. The objective of this study was to evaluate the variation in phytoplankton composition in intensive shrimp ponds in Bac Lieu province, Vietnam. Phytoplankton samples were collected in three black tiger shrimp (Penaeus monodon) ponds and three whiteleg shrimp (Litopenaeus vannamei) ponds. The collected data were analyzed using SPSS and canonical correlation analysis softwares. In total, 75 species of phytoplankton were recorded in black tiger shrimp ponds and 64 species in whiteleg shrimp ponds. Diatoms had the highest species diversity with 29-30 species (39%-47%), followed by green algae with 9-19 species (14%-25%); species numbers of other phyla varied from 5-12 (8%-16%). The total number of phytoplankton species throughout the study varied from 34-50 species. Algal density was relatively high and ranged from 497,091-2,229,500 ind./L and 1,301,134-2,237,758 ind./L in black tiger shrimp and whiteleg shrimp ponds, respectively. The diatom density tended to increase during the final stage of the production cycle in black tiger shrimp ponds. Blue-green algae and dinoflagellates also increased in abundance at the end of the cycle, which can affect shrimp growth. Diatoms were significantly positively correlated with pH, salinity, total ammonia nitrogen, and nitrate (NO₃^-) concentrations (p < 0.05). Blue-green algae and dinoflagellates were positively correlated with salinity, phosphate (PO₄^3-), and NO₃^-. Algal species diversity was lower in the whiteleg shrimp ponds than in the black tiger shrimp ponds. Several dominant algal genera were recorded in the shrimp ponds, including Nannochloropsis, Gyrosigma, Chaetoceros, Alexandrium, and Microcystis. The results of this study provide basic data for further investigations, and they contribute to the management of algae in brackish-water shrimp ponds.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.1
• /
• pp.85-95
• /
• 2023

In recent years, solid-state Li metal batteries (SSLBs) have attracted significant attention as the next-generation batteries with high energy and power densities. However, uncontrolled dendrite growth and the resulting pulverization of Li during repeated plating/stripping processes must be addressed for practical applications. Herein, we report a plastic-crystal-based polymer/ceramic composite solid electrolyte (PCCE) to resolve these issues. To fabricate the one-side ceramic-incorporated PCCE (CI-PCCE) film, a mixed precursor solution comprising plastic-crystal-based polymer (succinonitrile, SN) with garnet-structured ceramic (Li₇La₃Zr₂O₁₂, LLZO) particles was infused into a thin cellulose membrane, which was used as a mechanical framework, and subsequently solidified by using UV-irradiation. The CI-PCCE exhibited good flexibility and a high room-temperature ionic conductivity of over 10^-3 S cm^-1. The Li symmetric cell assembled with CI-PCCE provided enhanced durability against Li dendrite penetration through the solid electrolyte (SE) layer than those with LLZO-free PCCEs and exhibited long-term cycling stability (over 200 h) for Li plating/stripping. The enhanced Li⁺ transference number and lower interfacial resistance of CI-PCCE indicate that the ceramic-polymer composite layer in contact with the Li anode enabled the uniform distribution of Li⁺ flux at the interface between the Li metal and CI-PCCE, thereby promoting uniform Li plating/stripping. Consequently, the Li//LiFePO₄ (LFP) full cell constructed with CI-PCCE demonstrated superior rate capability (~120 mAh g^-1 at 2 C) and stable cycle performance (80% after 100 cycles) than those with ceramic-free PCCE.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.5
• /
• pp.345-356
• /
• 2017

We investigated 52 livestock farming complexes in Gyeong-Gi and Incheon provinces based on low, medium, and high livestock density and groundwater quality. The objective of this study was to evaluate a relationship between nitrate N concentration in groundwater and animal factors, such as livestock density and animal species. 2,200 groundwater samples for 3 years from 2012 to 2014 at Gyeong-Gi and Incheon provinces were collected and analyzed for pH, EC, DO, ORP, temperature, major anions and cations, such as $NO_3-N$, ${HCO_3}^-$, ${PO_4}^-$, ${SO_4}^{2-}$, $Cl^-$, $NH_4-N$, $K^+$, $Na^+$, $Ca^{2+}$, $Mg^{2+}$, T-N, and TOC. Average concentration of total N for generated load density was $23,973g\;day^{-1}\;km^{-2}$ for cattle, $51,551g\;day^{-1}\;km^{-2}$ for pig, and $52,100g\;day^{-1}\;km^{-2}$ for poultry. For animal feeding species, average ratio for generated load over discharge load was 16.1% for cattle, 7.8% for pig, and 7.1% for poultry. Therefore, cattle feeding region is highly vulnerable for water pollution compared to pig and poultry feeding areas. The concentrations of chloride, nitrate, and total N in the groundwater samples were higher at high animal farming regions than other regions. The average concentration of nitrate, and chloride in groundwater samples was $5.0mg\;L^{-1}$, $16.6mg\;L^{-1}$ for low livestock density, $6.9mg\;L^{-1}$, $17.7mg\;L^{-1}$ for medium livestock density and $7.6mg\;L^{-1}$, $22.7mg\;L^{-1}$ for high livestock density and total nitrogen (T-N) was $7.7mg\;L^{-1}$ for low livestock density, $9.4mg\;L^{-1}$ for medium livestock density, $10.7mg\;L^{-1}$ for high livestock density. In conclusion, based on this research, for managing groundwater quality near livestock farming regions, $Ca-(Cl+NO_3)$ group from the Piper diagram is more efficient than using 19 factors for water quality standard.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.1
• /
• pp.41-49
• /
• 1992

To determine the efficacy of uniconzaole[(E)-1-(4-chlorophenyl)-4,4-dimethy 2-(1,2,4-triazol-1-yl)-1-penten-3-ol)](XE-1019) as a phytoprotectant against $O_3$ injury in tomato plants(Lycopersicon esculentum Mill. 'Pink Glory'), plants were given a 50ml soil drench of uniconazole solution at concentrations of 0.001, 0,01, 0.1 and 0.2mg/pot thirteen days prior to $O_3$ fumigation. All four uniconazole concentrations were effective in providing protection against $O_3$ exposure(16h at 0.3 ppm). Uniconazole treatment above 0.001 mg/pot significantly reduced stem elongation, leaf enlargement, leaf area and fresh weight of plant, whereas increased chlorophyll concentration. Transpiration rate on a whole plant basis was reduced by uniconazole treatment and $O_3$ exposure. Uniconazole reduced ethylene production induced by $O_3$ injury but had little or no effect on defoliation of cotyledons and leaf epinasty. Activities of peroxidase (POD) and superoxide dismutase(SOD) were slightly increased by application of uniconazole. With increasing exposure time, $O_3$ increased POD activity but decreased SOD activity. The phytoprotective effects of uniconazole were diminished by applying gibberellin at $10{\sim}20$ ppm. These results suggest that the phytoprotective effects of uniconazole are related to its role of increasing activities of free radical scavengers such as POD and SOD, in addition to growth-retardation as an anti-gibberellin.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.4
• /
• pp.606-619
• /
• 2020

This study investigated the effects of crude protein levels in diets containing monobasic potassium phosphate (MKP) on water quality and the growth of Japanese eels Anguilla japonica and leafy vegetables in a Hybrid BFT-Aquaponics (HBFT-AP) system. The first experiment (EXP1) was designed to verify the effects of the feed itself on leafy vegetable productivity using two diets (CP48 and CP30) with MKP and one commercial eel diet (COM58). The second experiment (EXP2) examined the effects of the three diets on productivity of the fish and leafy vegetables in the HBFT-AP for 6 weeks. After the 6 week feeding trial, the weight gain, feed efficiency, specific growth rate and protein efficiency ratio of fish fed COM58 and CP48 were higher than those of fish fed CP30 (P<0.05) and the growth of the four leafy vegetables was the highest with fish fed CP48. Water quality was measured six times per week using a portable water quality meter and reagent measurements and showed variance with time for TAN (0.01-0.09 mg/L), NO₂-N (0.010-0.064 mg/L), NO₃-N (5.52-27.15 mg/L), PO₄-P (2.03-5.32 mg/L) and pH (7.86-6.15).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.81.2-81.2
• /
• 2012

To fabricate a metal mold for injection molding, hot-embossing and imprinting process, mechanical machining, electro discharge machining (EDM), electrochemical machining (ECM), laser process and wet etching ($FeCl_3$ process) have been widely used. However it is hard to get precise structure with these processes. Electrochemical etching has been also employed to fabricate a micro structure in metal mold. A through mask electrochemical micro machining (TMEMM) is one of the electrochemical etching processes which can obtain finely precise structure. In this process, many parameters such as current density, process time, temperature of electrolyte and distance between electrodes should be controlled. Therefore, it is difficult to predict the result because it has low reliability and reproducibility. To improve it, we investigated this process numerically and experimentally. To search the relation between processing parameters and the results, we used finite element simulation and the commercial finite element method (FEM) software ANSYS was used to analyze the electric field. In this study, it was supposed that the anodic dissolution process is predicted depending on the current density which is one of major parameters with finite element method. In experiment, we used stainless steel (SS304) substrate with various sized square and circular array patterns as an anode and copper (Cu) plate as a cathode. A mixture of $H_2SO_4$, $H_3PO_4$ and DIW was used as an electrolyte. After electrochemical etching process, we compared the results of experiment and simulation. As a result, we got the current distribution in the electrolyte and line profile of current density of the patterns from simulation. And etching profile and surface morphologies were characterized by 3D-profiler(${\mu}$-surf, Nanofocus, Germany) and FE-SEM(S-4800, Hitachi, Japan) measurement. From comparison of these data, it was confirmed that current distribution and line profile of the patterns from simulation are similar to surface morphology and etching profile of the sample from the process, respectively. Then we concluded that current density is more concentrated at the edge of pattern and the depth of etched area is proportional to current density.