• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.90-95
• /
• 2000

The ferrites, CuFe2O4 and SrFe12O129, were applied to decompose H2O for H2 generation. The ferrites prepared by the coprecipitation were reduced by CH4 gas to make the oxygen deficient ferrite. H2O was decomposed to form H2 by the oxygen deficient iron oxide, and the decomposition reactions were accelerated by the addition of divalent metals such as Cu and Sr in the ferrites. The spinel type CuFe2O4 containing a relatively large amount of divalent metals was more effective to H2 generation than magnetoplumbite type SrFe12O19 in H2O decomposition.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.429-437
• /
• 2006

To establish the efficient treatment technology of chemical cleaning wastewater from power plant, several AOPs($UV/H_2O_2,\;UV/TiO_2/H_2O_2$, Photo-Fenton oxidation) were investigated. Treatment efficiencies and the electrical energy requirements based on the EE/O parameter(the electrical energy, required per order of pollutant removal in $1m^3$ wastewater) were evaluated. TOC removal efficiencies of $UV/H_2O_2,\;UV/TiO_2/H_2O_2$, Photo-Fenton oxidation at the optimum conditions were 95.5%, 92.3%, 91.5%, respectively. The electrical energy requirements of $UV/H_2O_2,\;UV/TiO_2/H_2O_2$, Photo-Fenton oxidation were $11.26kWh/m^3,\;3.85kWh/m^3,\;0.799kWh/m^3$, respectively. From these results, it could be concluded that all of the three oxidation processes were effective for the degradation of citric acid. Considering the treatment efficiency and economical aspect, photo-Fenton oxidation was the most efficient treatment process among the three processes tested.

• Journal of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.267-271
• /
• 1974

The tetradentate schiff base, N,N'-bis(salicylaldehyde)-ethylene diimine has been reacted with a series of Mo(IV), Mo(V), Mo(IV), and Mo(III) oxidation states to form new Complexes; $[MoO_2(C_{16}H_{14}O_2N_2)], (MoO(C_{16}H_{14}O_2N_2)]_2O, (Mo(SCN)(C_{16}H_{14}O_2N_2)]_2O, and (Mo(H_2O)(C_{16}H_{14}O_2N_2)]_2O.$ These complexes have hexa coordinated configurations and the mole ratio of these ions to the ligand was 1:1. These complexes have been identified by visible spectra, infrared specra, T.G.A., D.T.A., and elemental analysis.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.552-556
• /
• 2007

In this study, noble metals (Pd, Ru, Ir) were supported to $TiO_2$ catalyst. In order to distribute metals uniformly, $H_2O-H_2$ pretreatment technique was used. Xylene, toluene, and MEK were used as reactants. The monometallic or bimetallic catalysts were prepared by the excess wetness impregnation method and were characterized by XRD, and XPS analysis. Pd-Ru, Pd-Ir bimetallic catalysts had multipoint active sites which improved the range of Pd metal state. Bimetallic catalysts had a higher conversion of VOCs than that of monometallic one. The effect of $H_2O-H_2$ pretreatment technique was the enhancement of uniform distribution of Pd particles and promotion of catalytic efficiency. In this study, addition of Ru and Ir metals to Pd promoted oxidation conversion of VOCs. In addition, $H_2O-H_2$ pretreatment promoted removal efficiency of VOCs on the $TiO_2$ support.

• Journal of the Korean Ceramic Society
• /
• v.25 no.2
• /
• pp.136-142
• /
• 1988

β-Al2O3, which is used for solid electrolyte membrances in sodium-sulfur batteries, was prepared by sol-gel process. Sodium-n-propoxide NaOC3H7 and aluminum-isopropoxide Al(OC3H7)3 were hydrolyzated in the solution at pH 3, pH 7, pH 9 and pH 11, respectively. The sol-gel processed samples were calcined at several temperature steps, respectively and analysed by thermal analyser(DT-TGA), infrared spectrum analyser and X-ray diffraction analyser. The gelling rate of solution at pH 7 was much higher than that of the solution at pH 3. Thermal exchanging behavior of the gels at pH 3 were similar to Na2O·Al2O3·6H2O and, above pH 7, were similar to Na2O·Al2O3·3H2O. When samples' composition ratio was 9.13 : 90.87 [NaOC3H7:Al(OC3H7)3] at pH 7, β-Al2O3 was formed at 1100℃.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.5
• /
• pp.201-206
• /
• 2011

Fe-2%Mn-0.5%Si alloys were corroded at 600, 700 and $800^{\circ}C$ for up to 70 h in 1 atm of $N_2$ gas, or 1 atm of $N_2/H_2O$-mixed gases, or 1 atm of $N_2/H_2O/H_2S$-mixed gases. Oxidation prevailed in $N_2$ and $N_2/H_2O$ gases, whereas sulfidation dominated in $N_2/H_2O/H_2S$ gases. The oxidation/sulfidation rates increased in the order of $N_2$ gas, $N_2/H_2O$ gases, and, much more seriously, $N_2/H_2O/H_2S$ gases. The base element of Fe oxidized to $Fe_2O_3$ and $Fe_3O_4$ in $N_2$ and $N_2/H_2O$ gases, whereas it sulfidized to FeS in $N_2/H_2O/H_2S$ gases. The oxides or sulfides of Mn or Si were not detected from the XRD analyses, owing to their small amount or dissolution in FeS. Since FeS was present throughout the whole scale, the alloys were nonprotective in $N_2/H_2O/H_2S$ gases.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.12
• /
• pp.573-577
• /
• 2005

[$TiO_2$] sol and $SiO_2$ sol were prepared using sol-gel method. As $H_{2}O$/Alkoxide ratios increased, sol had cluster structure and as $H_{2}O$/Alkoxide ratios decreased, sol had linear structure. Gelation time of $TiO_2$ sol was faster than that of $SiO_2$ sol according to the time. In comparison with initial viscosity between $TiO_2$ sol and $SiO_2$ sol, $TiO_2$ sol was highest at $H_{2}O/Ti(OC_{3}H_{7})_{4}=5$, $SiO_2$ sol was almost constant according to $H_{2}O/Si(OC_{2}H_{5})_{4}$ ratios.

• Korean Journal of Materials Research
• /
• v.23 no.11
• /
• pp.631-637
• /
• 2013

Synthesis of sub-micron $2SnO{\cdot}(H_2O)$ powders by chemical reduction process was performed at room temperature as function of viscosity of methanol solution and molecular weight of PVP (polyvinylpyrrolidone). Tin(II) 2-ethylhexanoate and sodium borohydride were used as the tin precursor and the reducing agent, respectively. Simultaneous calcination and sintering processes were additionally performed by heating the $2SnO{\cdot}(H_2O)$ powders. In the synthesis of the $2SnO{\cdot}(H_2O)$ powders, it was possible to control the powder size using different combinations of the methanol solution viscosity and the PVP molecular weight. The molecular weight of PVP particularly influenced the size of the synthesized $2SnO{\cdot}(H_2O)$ powders. A holding time of 1 hr in air at $500^{\circ}C$ sufficiently transformed the $2SnO{\cdot}(H_2O)$ into $SnO_2$ phase; however, most of the PVP (molecular weight: 1,300,000) surface-capped powders decomposed and was removed after heating for 1 h at $700^{\circ}C$. Hence, heating for 1 h at $500^{\circ}C$ made a porous $SnO_2$ film containing residual PVP, whereas dense $SnO_2$ films with no significant amount of PVP formed after heating for 1 h at $700^{\circ}C$.

• KSBB Journal
• /
• v.5 no.4
• /
• pp.355-363
• /
• 1990

Methanol-utilizing bacterium isolated from sewage samples in Seoul showed optimal temperature and pH of $33^{\circ}C$ and 7.1 for growth, respectively. The maximum specific growth rate was $0.42hr^{-1}$. The minimum medium composition was reconstituted depending on the surplus and the deficit of each component in the basal medium at steady state. The optimal composition was given as(g/l); Methanol 40, $(NH_4)_2\;SO_42, \;KH_2PO_4\;1.5, \;K_2HPO_4\;0.2, \;H_3PO_4\;0.79, \;Na_2HPO_4{\cdot}12H_2O\;0.15, \;MgSO_4{\cdot}7H_2O\;1.5, \;FeSO_4{\cdot}7H_2O\;0.034, \;MnSO_4{\cdot}4H_2O\;0.005, \;CuSO_4{\cdot}5H_2O\;0.0027, \;CaCl_2{\cdot}2H_2O\;0.25, \;ZnSO_4{\cdot}7H_2O\;0.007, \;(NH_4)_6\;Mo_7O_{24}{\cdot}4H_2O\;0.00048, \;H_3BO_3\;0.00068, \;CoCl_2\; 0.00024$ Under the continuous culture with optimum medium the maximum cell productivity was 3.8g/1/hr at dilution rate $0.23hr^{-1}$. Maximum cell concentration and its protein content were 19.5g/l and 70% at dilution rate of $0.1hr^{-1}$, respectively.

• Journal of the Korean Chemical Society
• /
• v.18 no.3
• /
• pp.194-201
• /
• 1974

The tetradentate schiff base ligand, N,N'-bis(salicylaldehyde)-m-phenylenediimine has been prepared from salicylaldehyde and m-phenylenediamine by Duff-reaction. The schiff base ligand has been reacted with Cu(II), Ni(II), Co(II), and Zn(II) to form new complexes; Cu(II)$[C_{20}H_{14}O_2N_2]{\cdot}2H_2O, Ni(II)[C_{20}H_{14}O_2N_2]{\cdot}2H_2O, Co(III)[C_{20}H_{14}O_2N_2]{\cdot}2H_2O and Zn(II)2[C_{20}H_{14}O_2N_2]{\cdot}4H_2O$. It seems to be that the Cu(II), Ni(II) and Co(II) complexes have hexacoordinated configuration with the schiff base and two molecules of water, while Zn(II) complex has tetracoordinated configuration with the schiff base and four molecules of water. The mole ratio of tetradentate schiff base ligand to Cu(II), Ni(II) and Co(II) are 1:1 but to Zn(II) is 1:2. These complexes have been identified by visible spectra, infrared spectra, T.G.A. and elemental analysis.