• Korean Chemical Engineering Research
• /
• v.45 no.1
• /
• pp.57-66
• /
• 2007

Natural gases generally consist of mainly $^{12}C$ and about 1.1% of $^{13}C$. It is well known that a stable carbon isotope, $^{13}C$, has been widely used for the applications of medical, pharmaceutical, and agricultural tracers. As a result, the development of the separation and concentrating technology of $^{13}C$ can cause of high value-added products and the possibility of the generation of new carbon materials, In general, there are two kinds of approaches to obtain a stable $^{13}C$ isotope by the separation of cryogenic distillation. One is to obtain a concentrated $^{13}CH_4$ isotope from natural gas. Another approach is to get concentrated $^{13}CO$ by distillation followed by a chemical reaction of $CH_4$ and $H_2O$. In this study, rigorous process simulations of the cryogenic distillation have been performed and analyzed for the concentrated separation of $^{13}C$ isotopes from LNG and NG by using commercial process simulator. Due to the very small differences of relative volatilities and separabilities of $^{12}C$ and $^{13}C$, the process design and operation of effective separation and concentration of $^{13}C$ need special strategies and feasibility studies. Utilization of vapor pressure data to acentric factor in SRK equation of state and optimized process conditions have been able to predict for the effective of the separation yield and concentration of $^{13}C$ for the cryogenic distillation. The various operation strategies for both batch and continuous cryogenic distillation are also studied and suggested for the basic design of the process. Development of this study can provide a tool for the effective design and operation of the cryogenic separation of $^{13}C$.

• Economic and Environmental Geology
• /
• v.50 no.3
• /
• pp.215-224
• /
• 2017

Arsenic (As) is known to be the most toxic element and frequently detected in groundwater environment. Inorganic As exists as arsenite [As(III)] and arsenate [As(V)] in reduced and oxidized environments, respectively. It has been reported that the toxicity of arsenite is much higher than that of arsenate and furthermore arsenite shows relatively higher mobility in aqueous environments. For this reason, there have been numerous researches on the process for oxidation of arsenite to arsenate to reduce the toxicity of arsenic. In particular, photooxidation has been considered to be simple, economical, and efficient to attain such goal. This study was conducted to evaluate the applicability of naturally-occurring goethite as a photocatalyst to substitute for $TiO_2$ which has been mostly used in the photooxidation processes so far. In addition, the effects of several factors on the overall performance of arsenite photocatalytic oxidation process were evaluated. The results show that the efficiency of the process was affected by total concentration of dissolved cations rather than by the kind of those cations and also the relatively higher pH conditions seemed to be more favorable to the process. In the case of coexistence of arsenite and arsenate, the removal tendency by adsorption onto goethite appeared to be different between arsenite and arsenate due to their different affinities with goethite, but any effect on the photocatalytic oxidation of arsenite was not observed. In terms of effect of humic acid on the process, it is likely that the higher concentration of humic acid reduced the overall performance of the arsenite photocatalytic oxidation as a result of competing interaction of activated oxygen species, such as hydroxyl and superoxide radicals, with arsenite and humic acid. In addition, it is revealed that the injection of oxygen gas improved the process because oxygen contributes to arsenite oxidation as an electron acceptor. Based on the results of the study, consequently, the photocatalytic oxidation of aqueous arsenite using goethite seems to be greatly feasible with the optimization of process.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.16-27
• /
• 2000

In order to produce raw material powder of advanced magnetic material by spray roasting process, newly modified spray roasting system was developed in this work. In this spray roasting system, raw material solution was effectively atomized and sprayed into the reaction furnace. Also, uniform temperature distribution inside reaction furnace made thermal decomposition process fully completed, and produced powder was effectively collected in cyclone and bag filter. This system equipped with apparatus which can purify hazard produced gas. In this study complex acid solution was prepared by dissolution of mill scale and ferro-Mn into the acid solution, and the pH of this complex acid solution was controlled about to 4. It was conformed that mill scale and ferro-Mn containing a lot of impurities such as $SiO_2$, P and Al could be used as raw material by reducing the impurities content of complex acid solution below 20 ppm. Complex oxide powder of Fe-Mn system was produced by spraying purified complex acid solution into the spray roaster through nozzle, and the variations of produced powder characters were studied by changing he reaction conditions such as reaction temperature, the injection velocity of solution and air, nozzle tip size and concentration of solution. The morphology of produced powder had spherical shape under the most experimental conditions, and concentration of solution. The morphology of produced powder has spherical shape under the most experimental conditions, and the composition and the particle size distribution were almost uniform, which tells the excellence of this spray roasting system. The grain size of most produced powder was below 100 nm. From the above results, it will be possible to produce ultra fine oxide powder from the chloride of Fe, Mn, Ni, Cu and rare earth by using this spray roasting system, and also to produce ultra fine pure metal powder by changing reaction atmosphere.

• Korean Journal of Food Science and Technology
• /
• v.20 no.5
• /
• pp.674-682
• /
• 1988

Total lipids from the roe, muscle and viscus of L. carinata were analyzed for lipid composition by column chromatography, thin-layer chromatography and gas-liquid chromatography. The roe lipids were characterized by a high level of wax esters (63.1%) and a low proportion of trigiycerides (9.9%). The viscus lipids also contained wax esters (32.8%) as its main component, followed by free fatty alcohols and acids (23.5%). On the other hand, the muscle lipids were found to contain a large amount of triglycerides (66.1%) with a trace of wax esters. The main fatty alcohol component of roe and viscus wax esters was C16:0 alcohol (53.0%; 61.7%), accompanied by C18:1 alcohol (10.2%) in the former and by C15:0 alcohol (8.8%) in the latter. Considerable amounts of odd-numbered fatty alcohols were found in both wax esters. On the other hand, the fatty acids of the roe and viscus wax esters contained a high percentage of monounsaturated (49.7%-56.6%) consisting of C16:1, C18:1 and C17:1 acid, and a significant amount of polyunsaturated (41.2%-32.9%), particularly C20:5${\omega}$3. The fatty acid components of triglycerides and phospholipids were different among the tissues tested, especially between roe and muscle or viscus. The fatty acid compositions of free fatty acids from the muscle and viscus were characterized by a higher level of polyunsaturated fatty acids (46.0-34.3%) compared to those of triglycerides 'in the roe, muscle and viscus (28.4%, 19.4% and 19.2%).

• Journal of the Korean Vacuum Society
• /
• v.18 no.6
• /
• pp.440-446
• /
• 2009

Indium tin oxide(ITO) substrate is one of the key components of the touch panel and its sputtering process is dependent on the characteristics of various touch panel, such as driving type, size of panel, and the intended use. In this study, we optimized the sputtering condition of ITO film on polycarbonate(PC) by using in-line sputtering method for the application to resistive type touch panel. We varied the $O_2$/Ar gas ratio, sputtering power, pressure and moving speed of substrate to deposit ITO films at room temperature with the base vacuum of $1{\times}10^{-6}\;torr$. The sheet resistance and its uniformity, the transmittance, the thickness of the ITO film on PC substrate are investigated and analyzed. The optimized process parameters are as follows : the sheet resistance is $500{\pm}50\;{\Omega}$/□, the uniformity of sheet resistance is lower than 10%, the transmittance is higher than 87 % at 550nm, and the thickness is about 120~250. The optimized deposition conditions by in-line sputtering method can be applied to the actual mass production for the ITO film manufacturing technology.

• Analytical Science and Technology
• /
• v.24 no.4
• /
• pp.243-248
• /
• 2011

A selective determination method of mercury (II) ion in aqueous solution by luminol-based chemiluminescence system (luminol CL system) has been developed. Determination of metal ions such as copper (II), iron (III), chromium (III) ion in solution by the luminol CL system using its catalytic role in the reaction of luminol and hydrogen peroxide has been reported by several groups. In this study, the catalytic activity of mercury (II) ion in the reaction of luminol and hydrogen peroxide was observed by the enhanced CL intensity of the luminol CL system. Based on this phenomenon, experimental conditions of the luminol CL system were investigated and optimized to determine mercury (II) ion in aqueous solution. While mercury (II) ion in mixed sample solution containing mercury (I) and (II) ions highly enhanced the CL intensity of the luminol CL system, the mercury (I) ion could not enhanced the CL intensity. Thus selective determination of the mercury (II) ions in a mixture containing mercury (I) and (II) ions could be achieved. Each concentration of mercury (I) and (II) ions in aqueous solution can be obtained from the results of the CL method that give the concentration of only mercury (II) ion and the inductively coupled plasma (ICP) method that give the total concentration of mercury ions. On the optimized conditions, the calibration curve of mercury (II) ion was linear over the range from $1.25{\times}10^{-5}$ to $2.50{\times}10^{-3}M$ with correlation coefficient of 0.991. The detection limit of mercury (II) ion in aqueous solution was calculated to be $1.25{\times}10^{-7}M$.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.6
• /
• pp.824-835
• /
• 1999

Background: Sleep-related breathing disorders are commonly found in patients with chronic renal failure and particularly, sleep apnea may have an influence on the long-term mortality rates in these patients. Maintenance hemodialysis is the mainstay of medical measures for correcting the metabolic derangements of chronic renal failure but it is uncertain whether it may alleviate sleep disorders including sleep apnea. Methods: Forty seven patients on maintenance hemodialysis were surveyed with the sleep questionnaire about their clinical symptoms related to sleep disorders. Among them, 15 patients underwent the polysomnography and their blood levels of urea nitrogen, creatinine, electrolytes and the arterial blood gases in the nights before and following hemodialysis were measured. Results: Forty(85.1%) of the 47 patients complained of the symptoms associated with sleep-wake cycle disturbances, 55.3% experienced snoring and 27.7% reported witnessed apneas. The duration of REM sleep increased significantly in the nights after hemodialysis compared to the nights without hemodialysis(p<0.05) and the percentage of total sleep time comprising NREM sleep decreased significantly in the nights following hemodialysis compared to the nights before hemodialysis(p<0.05). The percentage of total sleep time consisting of the stage 1 and 2 NREM sleep showed the trend for a decrease in the nights after hemodialysis(p=0.051), while the percentage of total sleep time comprising the stage 3 and 4 NREM sleep did not change between nights. The obstructive sleep apnea was more predominant type than the central one in both nights and there were no differences in the apnea index and the apnea-hypopnea index between the nights. The decrease in the blood level of urea nitrogen, creatinine, potassium and phosphorus was observed after hemodialysis(p<0.05), but the differences of parameters measured during polysomnography between the nights did not correlate with the changes of biochemical factors obtained on the two nights. Arterial blood gas analysis showed that pH was significantly greater in the nights after hemodialysis than in the nights before hemodialysis(p<0.05), but there were no correlations between the parameters examined during polysomnography and the parameters of arterial blood gas analysis(p<0.05). Conclusion: These results suggest that chronic renal failure is an important systemic disorder which is strongly associated with sleep disorders. Maintenance hemodialysis, although it is a widely accepted measure to treat chronic renal failure, did not significantly modulate the sleep architecture and the severity of sleep apnea. Thus, taking the patients with chronic renal failure into account, it is advisable to try not only to find a substantial way for correcting metabolic derangements but also to consider the institution of more effective treatments for sleep disorders.

• Journal of Food Hygiene and Safety
• /
• v.32 no.4
• /
• pp.284-289
• /
• 2017

Oxidized polyethylene wax (OPEW) is, one of the food additives, used as a coating agent in citrus fruits and nuts. OPEW is authorized to quantum satis in EU, USA, and is acceptable less than 250 mg/kg in Australia and New Zealand. But OPEW is unauthorized as a food additive in Korea. This study was to establish the analytical method of OPEW and demonstrate the effective application of various food samples. We first conducted to compare the various analytical method including acid value (AV), high temperature gel permeation chromatography (HT-GPC), matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF/MS), gas chromatography flame ionization detector (GC-FID) and fourier transform infrared spectroscopy (FT-IR). This result indicated that FT-IR spectrum of OPEW treated food sample displayed absorption bands for carbonyl group (C=O, $1714cm^{-1}$), ester group (C-O, $1463cm^{-1}$), aliphatic group (C-H, $2916cm^{-1}$). Furthermore, IR spectrum of OPEW treated food sample showed similar tendency with IR spectrum of OPEW standard. Therefore, it is confirmed that analytical method using FT-IR can be detected on analysis of OPEW in food. As a result of monitoring of 111 samples using established analytical method, OPEW was not detected in the food samples.

• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.355-368
• /
• 2003

In Exp. 1, this study was conducted to determine the effect of dietary germanium biotite on growth performance and nutrient digestibility in nursery pigs. A total of sixty crossbred pigs (initial body weight 15.09$\pm$0.18kg) were used in this experiment. This study was carried out for 28 days. The five treatments were control (CON; basal diet), GB0.1 (basal diet + germanium biotite 0.1%), GB0.3 (basal diet + germanium biotite 0.3%), GB0.6 (basal diet + germanium biotite 0.6%) and GB1.0 (basal diet + germanium biotite 1.0%). For overall period, ADG and Gain/feed were not significantly different among the treatments. In Exp. 2, a study was conducted to evaluate the effect of germanium biotite as a substitute for antibiotics in growing pigs. A total of fifty five crossbred pigs (initial body weight 32.47$\pm$0.9kg) were used in this experiment. The three treatments were negative control (NC: basal diet without antibiotic), positive control (PC: basal diet + 200ppm CTC) and GB0.3 (basal diet + germanium biotite 0.3%). Pigs fed PC (17%, 385 vs 451 g/d) and GB0.3 (14%, 385 vs 438 g/d) diets grew faster(P<0.05) than pigs fed NC diet. Pigs fed PC and GB0.3 diets resulted higher(P<0.05) ADFI than pigs fed CON diet. However, pigs fed GB0.3 diet had improved gain/feed compared to pigs fed NC diet(P<0.05). Apparent digestibility of DM and N by pigs fed PC and GB0.3 diets were greater(P<0.05) than those by pigs fed NC diet. In Exp. 3, a study was conducted to determine the effect of dietary germanium biotite on growth performance, plasma characteristics, backfat thickness and fecal ammonia gas concentration in finishing pigs. A total of seventy-two finishing pigs (initial body weight 78.56$\pm$1.32kg) were used in this experiment. The treatments included 1) Control (CON; basal diet) 2) GB1.0 (basal diet + germanium biotite 1.0%), 3) GB3.0 (basal diet + germanium biotite 3.0%). Pigs fed GB1.0 diet grew faster than pigs fed CON diet and GB0.3 diet (P<0.05). Also, pigs fed CON diet showed higher(p<0.05) ADFI than pigs fed GB3.0 diet. Pigs fed GB diets had improved gain/feed compared to pigs fed CON diet(P<0.05). Total?and VLDL concentrations in plasma of pigs fed GB diets treatments were significantly decreased compared to those in pig fed CON diet(P<0.05). However, HDL-cholesterol concentration in plasma of the pig was significantly increased compared to those in pigs fed CON diet (P<0.05). Pigs fed CON diet exerted higher(P<0.05) backfat thickness than pigs fed GB1.0 (5.4%, 27.19 vs 25.71mm) and GB3.0 (16.1%, 27.19 vs 22.81mm) diets. Feces from CON treatment were higher in fecal ammonia gas concentration than faces from pigs fed GB1.0 (64.1%, 17.00 vs 6.10mg/kg)and GB3.0 (61.8%, 17.00 vs 6.50mg/kg) treatments(P<0.05). In conclusion, the results suggest that the dietary addition of germanium biotite into diets for nursery pigs did not affect growth performance. The results also suggest the possibility of germanium biotite to replace antibiotic in diets for growing pigs. In finishing pigs, dietary supplementation of germanium biotite was an effective means for improving growth performance and for decreasing Total-and LDL+VLDL-plasma cholesterols, backfat and fecal ammonia gas concentration.

• Journal of Sensor Science and Technology
• /
• v.10 no.1
• /
• pp.62-70
• /
• 2001

The ZnSe sample grown by chemical bath deposition (CBD) method were annealed in Ar gas at $45^{\circ}C$. Using extrapolation method of X-ray diffraction pattern, it was found to have zinc blend structure whose lattice parameter $a_o$ was $5.6687\;{\AA}$. From Hall effect, the mobility was likely to be decreased by impurity scattering at temperature range from 10 K to 150 K and by lattice scattering at temperature range from 150 K to 293 K. The band gap given by the transmission edge changed from $2.700{\underline{5}}\;eV$ at 293 K to $2.873{\underline{9}}\;eV$ at 10 K. Comparing photocurrent peak position with transmission edge, we could find that photocurrent peaks due to excition electrons from valence band, ${\Gamma}_8$ and ${\Gamma}_7$ and to conduction band ${\Gamma}_6$ were observed at photocurrent spectrum. From the photocurrent spectra by illumination of polarized light on the ZnSe thin film, we have found that values of spin orbit coupling splitting ${\Delta}so$ is $0.098{\underline{1}}\;eV$. From the PL spectra at 10K, the peaks corresponding to free bound excitons and D-A pair and a broad emission band due to SA is identified. The binding energy of the free excitons are determined to be $0.061{\underline{2}}\;eV$ and the dissipation energy of the donor -bound exciton and acceptor-bound exciton to be $0.017{\underline{2}}\;eV$, $0.031{\underline{0}}\;eV$, respectively.