• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.9
• /
• pp.1001-1005
• /
• 2004

Rye-sensitized solar cell (DSSC) is a new class of solar cell, which consists of nanoporous TiO$_2$ electrode, dye-sensitizer, electrolyte, and counter electrode. Such cell is operated in sunlight via the principle of photosynthetic electrochemistry. In order to obtain the good dispersion of nano size TiO$_2$ particles In slurry, the pH of solvent, the sort and quantify of solvent additive and the quantity of surfactant were adjusted. As results, the lower the pH of solvent was the lower the viscosity of the slurry became. The addition of ethylene glycol and propylene glycol to dilute HNO$_3$ brought about the lowering of viscosity and the enhancement of stability in slurry. The addition of surfactant lowered the viscosity of slurry. It was possible to obtain the homogeneous and uniformly dispersed mesoporous TiO$_2$ film using the dilute HNO$_3$ solvent of pH 2 with the addition of ethylene glycol and neutral surfactant. DSSC was assembled with TiO$_2$ electrode and Pt electrode, and its photoelectric property was measured using the monochromatic wavelength in the rangee of 350∼700 nm.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.5
• /
• pp.338-341
• /
• 1986

Hydrocarbon solution of $Ir(PPh_3)_2(CO)OClO_3$ reacts with $Ph_2PC_6H_4$-o-CHO and 3-methyl-2-aminopyridinyl aldimine to yield ${\bar{Ir(Ph_2PC_6H_4-o-CO)}}\;(PPh_3)_2(CO)(H)ClO_4$(1) and ${\bar{Ir(NC_6H_6NC}}C_6H_5)(PPh_3)_2(CO)(H)ClO_4$(2), respectively. The compound $Ir(PPh_3)_2N_2Cl$ also reacts with $Ph_2PC_6H_4$-o-CHO and 3-methyl-2-aminopyridinyl aldimine to give ${\bar{Ir(Ph_2PC_6H_4-o-C}}O)(PPh_3)_2(H)Cl(3)$ and $Ir(NC_6H_5NCC_6H_5(PPh_3)_2(H)Cl(4)$, respectively. Compounds 1, 2, 3, and 4 were characterized by infrared, $^1H$ NMR, $^{31}p$ NMR, UV spectra, and conductivity measurements.

• KSBB Journal
• /
• v.13 no.2
• /
• pp.168-173
• /
• 1998

Gamma irradiated and non-irradiated Agrimonia pilosa Ledebour were extracted by 70% ethanol. The combined effects of the Agrimonia pilosa Ledebour extract and NaCl on survival of Escherichia coli O157:H7 in tryptic soy broth were investigated. E. coli O157:H7 decreased ca 1 log cycle by the addition of 2% sample extract, and the anthbacterial activity was increased as the concentration of sample extract was increased. The irradiation effect of the sample on antibacterial activity was not observed. On the treatment of NaCl alone, E. coli O157:H7 was inactivated (ca 3~4 log cycle reduction within 48 hr) in more than 7% NaCl. The higher inactivation(ca 5 log cycle reduction within 48 hr) occurred in the presence of 2% sample extract and 5% NaCl than in the addition of each alone. The extracted antibacterial substance was stable in the pH range of 4.0 to 7.0, heat treatment at 121$^\circ C$ for 15 min, and freezing at -18$^\circ C$ and thawing at 37$^\circ C$. There fore, the sample extract, would substantially increase the food-safety in terms of E. coli O157:H7.

• Korean Journal of Materials Research
• /
• v.8 no.9
• /
• pp.813-818
• /
• 1998

Ultrafine powders of $\textrm{In}_{2}\textrm{O}_{3}$-doped $\textrm{SnO}_{2}$ were synthesized by a coprecipitation method and the effects of pH value and the amount of In2Q addition on particle size were investigated. The influence of pH value on particle size could be negligible, whereas the amount of $\textrm{In}_{2}\textrm{O}_{3}$ has influenced on particle size and specific surface area. The gas sensitivity to hydrocarbOn($\textrm{C}_{3}\textrm{H}_{8}$, $\textrm{C}_{4}\textrm{H}_{10}$) increased with $\textrm{In}_{2}\textrm{O}_{3}$ addition and reached a maximum at 3wt.% addition. From the results of impedance analysis and I-V characteristics. it was showed that the agglomeration structure of particles and the boundaries between agglomerates were the important factors to determine the gas sensing mechanism.

• Journal of the Korean Chemical Society
• /
• v.67 no.5
• /
• pp.333-338
• /
• 2023

In this study, the H₂O reaction with SiO clusters was investigated using ab initio Monte Carlo simulations and density functional theory calculations. Three chemistry models, PBE1/DGDZVP (Model 1), PBE1/DGDZVP (Si atom), and aug-cc-pVDZ (O and H atoms), (Model 2) and PBE1/aug-cc-pVDZ (Model 3), were used. The average bond lengths, as well as the relative and reaction energies, were calculated using Models 1, 2, and 3. The average bond lengths of Si-O and O-H are 1.67-1.75 Å and 0.96-0.97 Å, respectively, using Models 1, 2, and 3. The most stable structures were formed by the H transfer from an H₂O molecule except for Si₃O₃-H₂O-1 cluster. The Si₃O₃ cluster with H₂O exhibited the lowest reaction energy. In addition, the Bader charge distributions of the Si_nO_n and (SiO)_n-H₂O clusters with n = 1-7 were calculated using Model 1. We determined that the reaction sites between H₂O and the SiO clusters possessed the highest fraction of electrons.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.1
• /
• pp.29-32
• /
• 2005

Chemical mechanical polishing is an essential process in the production of copper-based chips. On this work, the stability of hydrogen peroxide ($H_{2}O_{2}$) as an oxidizer of copper CMP slurry has been investigated. $H_{2}O_{2}$ is known as the most common oxidizer in copper CMP slurry. But $H_{2}O_{2}$ is so unstable that its stabilization is needed using as an oxidizer. As adding KOH as a pH buffering agent, stability of $H_{2}O_{2}$ decreased. However, $H_{2}O_{2}$ stability in slurry went up with putting in small amount of BTA as a film forming agent. There was no difference of $H_{2}O_{2}$ stability between pH buffering agents KOH and TMAH at similar pH value. Addition of $H_{2}O_{2}$ in slurry in advance of bead milling led to better stability than adding after bead milling. Adding phosphoric acid resulted in the higher stability. Using alumina C as an abrasive was good at stabilizing for $H_{2}O_{2}$.

• Journal of Electrochemical Science and Technology
• /
• v.7 no.2
• /
• pp.91-96
• /
• 2016

Oxidation behaviours of ash free coal (AFC), carbon, and H₂ fuels were investigated with a coin type molten carbonate fuel cell. Because AFC has no electrical conductivity, its oxidation occurs via gasification to H₂ and CO. An interesting behaviour of mass transfer resistance reduction at higher current density was observed. Since the anode reaction has the positive reaction order of H₂, CO₂ and H₂O, the lack of CO₂ and H₂O from AFC results in a significant mass transfer resistance. However, the anode products of CO₂ and H₂O at higher current densities raise their partial pressure and mitigate the resistance. The addition of CO₂ to AFC reduced the resistance sufficiently, thus the resistance reduction at higher current densities did not appear. Electrochemical impedance results also indicate that the addition of CO₂ reduces mass transfer resistance. Carbon and H₂ fuels without CO₂ and H₂O also show similar behaviour to AFC: mass transfer resistance is diminished by raising current density and adding CO₂.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.634-639
• /
• 1998

$Y_2O_3$ and $Nb_2O_5$ co-doped zirconia composites containing 10~30 vol% $Al_2O_3$ with two different particle sizes were sintered for 5 h at $1550^{\circ}C$ to evaluate low-temperature phase stability of the composite using X-ray diffractometry after heat-treatments for 1000 h at $250^{\circ}C$ in air or for 5 h at $180^{\circ}C$ in 0.3 MPa $H_2O$ vapor pressure. No tetragonal to monoclinic phase transformation during degradation, so called enhanced low-temperature phase stability, was observed for all composites. It is concluded that Nb addition to the composite for the phase stability is more effective than $Al_2O_3$ addition. The optimum combination of strength (670 MPa) and fracture toughness ($7.1{\textrm} {MPam}^{1/2}$) were obtained for the composite containing 20 vol% of $Al_2O_3$ with 2.8 $\mu$m to 0.2 $\mu$m, the flexural strength increases but the fracture toughness decreases.

• Journal of the Korean Ceramic Society
• /
• v.54 no.4
• /
• pp.303-307
• /
• 2017

Pure $In_2O_3$, 0.5 and 1.0 wt% Mg doped $In_2O_3$ hollow spheres were synthesized by ultrasonic spray pyrolysis of a solution containing In-, Mg-nitrate and sucrose and their gas sensing characteristics to 5 ppm $C_2H_5OH$, p-xylene, toluene, and HCHO were measured at 250, 300 and $350^{\circ}C$. Although the addition of Mg decreases the specific surface area and the volume of meso-pores, the gas response (resistance ratio) of the 0.5 wt% Mg doped $In_2O_3$ hollow spheres to 5 ppm $C_2H_5OH$ at $350^{\circ}C$ (69.4) was significantly higher than that of the pure $In_2O_3$ hollow spheres (24.4). In addition, the Mg doped $In_2O_3$ hollow spheres showed the highest selectivity to $C_2H_5OH$. This was attributed to the dehydrogenation of $C_2H_5OH$ assisted by basic MgO into reactive $CH_3CHO$ and $H_2$.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.46.3-47
• /
• 2017

We performed simultaneous VLBI observations of H2O 616-523 (22.2 GHz) and SiO v=1, 2, J=1-0 (43.1, 42.8 GHz) and v=1, J=2-1, J=3-2 (86.2, 129.3 GHz) masers toward VX Sagittarius using the Korean VLBI Network (KVN). The astrometrically registered maps of the 22.2 GHz H2O and 43.1, 42.8, 86.2 SiO masers were successfully obtained at two epochs of 2016 February 27 and 2016 March 27 by adopting the Source Frequency Phase Referencing (SFPR) method. In addition we detected 129.3 Ghz SiO maser at second epoch. These results make it possible to determine the accurate position of central star as a dynamical center of 22.2 GHz H2O maser and relative locations of 43.1, 42.8, 86.2, 129.3 GHz SiO masers. In addition, it is possible to investigate the morphological and kinematic variations of clumpy structures from SiO maser to H2O maser regions in future together with the development of asymmetric structure of H2O maser region.