• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2002

The preparation of 0.9PMN-0.1PT ceramics by the metal alkoxide method and the effect of excess $Mg(OC_2H_5)_2$, $Pb(CH_3COO)_2{\cdot}3H_2O$ are reported. The excess$ Mg(OC_2H5)_2$ addition signficantly affects the rate of perovskite phase formation in 0.9PMN-0.1PT ceramics. The sample by addition of 5 wt% excess $Mg(OC_2H5)_2$ sintered at $1150^{\circ}C$ for 1 hr obtained perovskite single phase and showed 98% of the theoretical density. The dielectric constant of the pellets sintered at $1150^{\circ}C$ was increased by the addition of 5 wt% excess $Mg(OC_2H_5)_2$ and had a maximum value of 15000 at 1 kHz.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.10
• /
• pp.69-76
• /
• 2012

This study focuses both on the quantitative measurement of hydroxyl radicals formed by an electron beam (E-beam) process and on the decomposition of pentachlorophenol(PCP) in the presence of $H_2O_2$ and $Fe^{3+}-EDTA$ as additives. To attain this objective, the quantitative measurement of hydroxyl radical was performed with the hydroylation of benzoic acid (BA), producing hydroxybenzoic acid (OHBA). As a result, the concentrations of hydroxyl radical measured were lower than those of hydroxyl radical predicted. Probably, it indicates that the reactive species generated during E-beam irradiation are able to scavenge the hydroxyl radicals. In particular, the degradation of PCP was promoted by the addition of $H_2O_2$ (< 1mM). On the other hand, its degradation as well as the generation of chloride ions as a by-product was inhibited by the addition of $H_2O_2$ (> 1mM), and thus carbon yield(%) of oxalic acid as a by-product was increased. During E-beam irradiation the addition of $Fe^{3+}-EDTA$ effectively decomposed the PCP, thus increasing the G-values. Considering the formation of OHBA and the decomposition of PCP, these results suggest that the addition of $Fe^{3+}-EDTA$ in the E-beam process can produce the further hydroxyl radicals and enhance the efficiency of PCP decomposition at low dose.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.1
• /
• pp.40-49
• /
• 2001

The present work presents a novel approach for the dynamic quantification of respiration rates on a small scale by using lysine-producing Corynebacterium glutamicum ATCC 21253. Cells sampeld from batch cultures at different times were incubated ina 12-ml scale bioreactor equipped with a membrane mass spectrometer. Under dynamic conditions, gas exchange across the gas-liquid phase, specific respiration rates, and RQ values were precisely measured. For this purpose, suitable mass balances were formulated. The transport coefficients for $O_2$ and $CO_2$, crucial for calculating the respiration activity, were determined as $k_La_{O2}=9.18h^{-1}$ and $k_La_{CO2}=5.10h^{-1}$ at 400 rpm. The application of the proposed method to batch cultures of C. glutamicum ATCC 21253 revealed the maximum specific respiration rates of $q_{O2}=8.4\;mmol\;g^{-1}h^{-1}\;and\;q_{CO2}=8.7\;mmol\;g^{-1}h^{-1}$ in the middle of the exponential growth phase after 5 h of cultivation. When the cells changed from growth to lysine production due to the depletion of the essential amino acids theonine, methionine, and leucine, $q_{O2}\;and\;q_{CO2}$ decreased significantly and RQ increased. The respiration data exhibited an excellent agreement with previous cultivations of the strain [13]. This confirms the potential of the developed approach to realistically reflect the metabolic activities of cells at their point of sampling. The short-term influence of added threonine, methionine, and leucine was highest during the shift from growth to lysine production, where $q_{O2}\;and\;q_{CO2}$ increased 50% within one minute after the pulse addition of these compounds. Non-growing, yet lysine-producing cells taken from the end of the batch cultivation revealed no metabolic stimulation with the addition of threonine, methionine, and leucine.

• Natural Product Sciences
• /
• v.19 no.1
• /
• pp.54-60
• /
• 2013

Rhus verniciflua Stokes (Anacadiaceae) is a plant that is native to East Asian countries, such as Korea, China, and Japan, and it has been found to exert various biological activities including antioxidative, anti-aggregatory, anti-inflammatory, anti-mutagenic, and apoptotic effects. Sulfuretin is one of the major flavonoid component isolated from the heartwood of R. verniciflua. Reactive oxygen species (ROS), produced via dental adhesive bleaching agents and pulpal disease, can cause oxidative stress. In the present study, we isolated sulfuretin from R. verniciflua and demonstrated that sulfuretin possesses cytoprotective effects against hydrogen peroxide ($H_2O_2$)-induced dental cell death. $H_2O_2$ is a representative ROS and causes cell death through necrosis in human dental pulp (HDP) cells. $H_2O_2$-induced cytotoxicity and production of ROS were blocked in the presence of sulfuretin, and these effects were dose dependent. Sulfuretin also increased heme oxygenase-1 (HO-1) protein expression. In addition, to determine whether sulfuretin-induced HO-1 expression mediated this cytoprotective effect, HDP cells were cotreated with sulfuretin in the absence or presence of SnPP, an inhibitor of HO activity. Sulfuretin-dependent HO-1 expression was required for suppression of $H_2O_2$-induced HDP cell death and ROS generation. These results indicate that sulfuretin-dependent HO-1 expression was required for the inhibition of $H_2O_2$-induced cell death and ROS generation. In addition, sulfuretin may be used to prevent functional dental cell death and thus may be useful as a pulpal disease agent.

• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.323-329
• /
• 2009

Influences of ceramic filler types and dose on the sintering, phase evolution, and dielectric properties of ceramic/CaO-$Al_2O_3-SiO_2$ glass composites were investigated. All of the specimens were sintered at $900^{\circ}C$ for 2 h, which conditions are required by the lowtemperature co-firing ceramic (LTCC) technology. Ceramic fillers of $Al_2O_3,\;SiO_2$, kaolin, and wollastonite were used. The addition of $Al_2O_3$ filler yielded the crystalline phases of alumina and wollastonite, and the densification over 95% of the relative density was achieved up to 50 wt% addition of the filler. For the cases of the fillers of $SiO_2$, kaolin, and wollastonite, crystalline phases of quartz, mullite, and wollastonite formed, while the densification decreased monotonically with the filler addition. In overall, all the investigated fillers with 10 wt% addition resulted in a reasonable sintering (over 95 %) and low dielectric constants (less than 6), demonstrating the feasibility of the investigated composites for application to a LTCC substrate material with a low dielectric constant.

• Analytical Science and Technology
• /
• v.10 no.1
• /
• pp.31-34
• /
• 1997

Barium titanyl oxalate which is a precursor of barium titanate has been precipitated at pH 4~5 by a rapid addition of aqueous titanyl oxalate solution to artificial environmental water samples containing equivalent weight of $Ba^{2+}$ ions. Quantitative recoveries of $Cd^{2+}$ and $Pb^{2+}$ from the water samples has been confirmed and found to be usable as a possible method of preconcentration for their determination.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 1999.11a
• /
• pp.111-115
• /
• 1999

The $Li_2O-MgO-MgF_2-SiO_2$glasses with addition of $B_2O_3$ were investigated in order to make glass-ceramics for low temperature firing substrate. Glasses were made by melting at $1450^{\circ}C$ in the electronic furnace and crystallized at $750^{\circ}C$. After the crystallization, crystal phases and microstructure were observed. The crystal phases were polycrystalline of lithium boron fluorphlogopite and lithium fluorhectorite. The crystal shape was changed to grande type from needle type with the increase in $B_2O_3$ contents. Average particle size of the glass-ceramics aftar water swelling was $3.77{\mu}{\textrm}{m}$. The optimum sintering temperature and sintering shrinkage of the substrate were $900^{\circ}C$ and 13.4vol%, respectively.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.129-130
• /
• 1998

In this paper, We designed the ECG-NIBP-$SpO_2$ patient monitor. This production can measure Electrocardiograph, Heart Rate, Noninvasive Blood Pressure, and Oxygen Saturation for Noninvasive Mehod and can display each information. These informations were implemented by the electrodes of ECG part, the cuff of NIBP module and the finger probe with light sensor of $SpO_2$ without injection of needle or catheter. In addition, We developed a new analysis algorithm and measurement technique for NIBP and $SpO_2$ to observe patient's conditions correctly.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1522-1524
• /
• 1998

Experimental results on the effect of $SiO_2$ addition to Bi based ZnO varistor show that secondary phases in microstructure and nonlinear coefficient are increased, and that leakage current is decreased with $SiO_2$ additive content. The varistor with 0.1 mol%-$SiO_2$ additive exhibits lower resistive current than other specimen at ($E_{1mA}$ x 0.6) applied voltage and temperature of $115^{\circ}C$ for 350h.

• Journal of the Korean Ceramic Society
• /
• v.22 no.4
• /
• pp.54-60
• /
• 1985

Gas sensing materials for detecting flammable gases such as $CH_4$, $C_3H_8$ and n-$C_4H_{10}$ were developed by util-izing $In_2O_3$ as the principal sensing material. The sensing materials were formulated by mixing $In_2O_3$ powder with one or two other chemicals such as $SnO_2$, $Y_2O_3$ and $Al_2O_3$ with a small addition of $PdCl_2$ as a catalyst. Sample of sensor were fabricated by coating each of the mixtures on a ceramic tube impregnating ethylsili-cate and firing at 75$0^{\circ}C$ Each material mixture was evaluated by measuring and comparing gas sensitivity(resistance in air/resistance with gas) to flammable gases such as $CH_4$, $C_3H-8$ and n-$C_4H_{10}$. It was found that among fifteen compositions tested three compositions as follows show the highest gas sensitivity and thus are very feasible for commercialization as the gas sensors ; o49.5 $In_2O_3$+50 Al2O3_0.5 PdCl2(wt%) o $20In_2O_3+29$ $SnO_2+50$ $Al_2O_3+1$ $PdCl_2$(wt%) o40 $In_2O_3$+9 $Y_2O_3+50$ $Al_2O_3+1$ $PdCl_2$(wt%)