• 한국세라믹학회지
• /
• 제32권12호
• /
• pp.1349-1356
• /
• 1995

The change of permeation mechanism from Knudsen diffusion to micropore diffusion was observed after CVD modification of an alumina-sol coated alumina support which was prepared by slip coating process. Permselectivities of He/N2, H2/N2, and CO2/N2 were 5.67, 5.02, and 1.44, respectively. These values were higher than those under Knudsen diffusion controlled region.

• Journal of Pharmaceutical Investigation
• /
• 제29권3호
• /
• pp.217-225
• /
• 1999

These studies were designed to determine the effect of hydroalcoholic gel system (lower alkanol concentration: 40-60%) compared to general hydrogel system (lower alkanol concentration: 10-35%) on transdermal delivery of piroxicam and its anti-inflammatory activity. Piroxicam was incorporated into a hydroalcoholic gel and a hydrogel containing polymers, solvents, and cosolvents. The pH of gel was about 6.3-7.3 and the solvent mixtures were composed of water and various concentrations of ethanol (35, 40, 50, and 60%). For the in vitro study, the skin permeation of piroxicam from the gel formulations was investigated using Franz modified diffusion cells fitted with hairless mouse skin. For the in vivo study, the anti-inflammatory activity of hydroalcoholic gel was compared to other commercial products (piroxicam hydrogel and ketoprofen hydrogel) in rat and human. The anti-inflammatory activity was determined using carrageenan induced foot edema model in rat. For the clinical study, it was evaluated from determining efficacy and acceptability with 98 patients suffering from musculoskeletal pain. A novel piroxicam hydroalcoholic gel was successfully formulated in the range of 40-50% of ethanol as solvent, more than 10% of propylene glycol, 5% of $Transcutol^{\circledR}$ and 1 % of benzyl alcohol. The skin permeation of piroxicam using hydroalcoholic gel system was greater than that of general hydrogel system $(flux\;:\;139.1-148.2\;{\mu}g/cm^2/hr\;vs.43.0-84.5 {\mu}g/cm^2/hr)$ in vitro. In carrageenan-induced edema model, the anti-inflammatory activity of hydroalcoholic gel was better than that of piroxicam hydrogel for edema inhibition (75.1 % vs. 62.9%, p

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.648-653
• /
• 2012

Hybridization of dense ceramic membranes for hydrogen separation with an electronically conductive metallic phase is normally utilized to enhance the hydrogen permeation flux and thereby to increase the production efficiency of hydrogen. In this study, we developed a nickel and proton conducting oxide ($BaCe_{0.9}Y_{0.1}O_{3-{\delta}}$: BCY) based cermet (ceramic-metal composites) membrane. Focused on the general criteria in that the hydrogen permeation properties of a cermet membrane depend on its microstructural features, such as the grain size and the homogeneity of the mix, we tried to optimize the microstructure of Ni-BCY cermets by controlling the fabrication condition. The Ni-BCY composite powder was synthesized via a solid-state reaction using $2NiCO_3{\cdot}3Ni(OH)_2{\cdot}4H_2O$, $BaCeO_3$, $CeO_2$ and $Y_2O_3$ as a starting material. To optimize the mixing scale and homogeneity of the composite powder, we employed a high-energy milling process. With this high-energy milled composite powder, we could fabricate a fine-grained dense membrane with an excellent level of mixing homogeneity. This controlled Ni-BCY cermet membrane showed higher hydrogen permeability compared to uncontrolled Ni-BCY cermets created with a conventionally ball-milled composite powder.

• 통합자연과학논문집
• /
• 제2권2호
• /
• pp.78-81
• /
• 2009

In recent years, organometallic polymer containing silane and silole unit has been a topic of interest because of the wide range of optical, electrical and luminescent properties. In previous work, we synthesized functionalsilanebridged[1]ferrocenophane from the reaction of dimethyldichlorosilane[Me2SiCl2] and diphenyldichlorosilane[Ph2SiCl2] and dichloromethylvinylsilane[C3H6SiCl2] with ferrocene$[Fe({\eta}-C5H4)2]$ and n-BuLi. In this work, we have synthesized Poly(ferrocenylsilane) via the Thermal Ring-Opening Polymerization(ROP). characteristics of the poly(ferrocenylsilane) were investigated by gel permeation chromatography(GPC), 1H- and 13C-NMR spectroscopy.

• 한국축산식품학회지
• /
• 제33권3호
• /
• pp.356-362
• /
• 2013

We investigated the skin permeability and various biological activities of porcine homogenate of placenta (HP) with the highest protein contents (452.89 ${\mu}g/mg$). The content of protein in subcritical extract of HP (SPE) was decreased from the initial content of 452.9 ${\mu}g/mg$ to 262.7 ${\mu}g/mg$ at 3 h subcritical extract. The contents of amino type nitrogen (A-N) were sharply increased from 35.1 ${\mu}g/mg$ of initial content to 305.9 ${\mu}g/mg$ at 3 h subcritical extract. The HP showed a noticeable activity in terms of antioxidant capacity for ferric reducing antioxidant power (FRAP) assay and especially for 2,2'-Azinobis- (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) method. HP, SPE-0.5, SPE-2 and SPE-3 showed inhibitory effect on elastase activities with an $IC_{50}$ of 46.1, 42.9, 31.6 and 34.7 ${\mu}g/mL$, respectively. SPEs showed more significantly inhibitory effect than HP (p<0.05). The skin permeability of the SPEs was higher than that of the HP. SPE-3 showed highest skin permeation and the permeability was significantly higher than that of HP. SPE-2 also showed significantly higher permeation than HP after 4 h. As expected, increase of extraction time significantly increased skin permeability in the subcritical extract of HP (SPE). From these results, in terms of cost and source availability, porcine placenta extracted with subcritical extraction has advantages over untreated PE and have potential as a cosmetic ingredient.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.451-453
• /
• 2013

Porous ceramic membranes consisting of $Ce_{1-x}Y_xO_{2-{\delta}}$ were developed for hydrogen permeation tests. Various amounts (x = 0, 0.05, 0.1, 0.2) of yttrium were doped to ceria to study the effect of yttrium doping on ceria membranes on various properties, including hydrogen permeability. $Ce_{1-x}Y_xO_{2-{\delta}}$ powder was synthesized by the sol-gel method. These membranes were fabricated by pressing and sintering at $1300^{\circ}C$ for 6 h. As the amount of yttrium increased, the grain size of the membrane decreased. Hydrogen permeability was improved as the yttrium content increased. Selective permeability of hydrogen compared to CO is explained by electric conductivity. As the temperature rose, both the hydrogen perm-selectivity and electric conductivity on $Ce_{0.8}Y_{0.2}O_{1.9}$ improved.

• Korean Membrane Journal
• /
• 제3권1호
• /
• pp.51-58
• /
• 2001

The surface of Poly(ether imide) (PEI) membranes has been sulfonated using CIS03H. The resulting membranes were characterized through the analysis of ESCA and contact angle measurements The sulfonated PEI membranes were exposed to gases of $O_2$, $N_2$, and $CO_2$ to measure the permeation rates and ideal separation factors. In addition, the diffusivities and solubilities of individual gases were measured. The diffusivity effect is more dominant than the solubility one on gas transports.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 The 4th Korea-Italy Workshop
• /
• pp.21-24
• /
• 2003

Methane steam reforming (MSR) was studied in a membrane reactor (MR) with a Pd-based and a porous alumina membranes. MRs showed methane conversion higher than that foresaw by the thermodynamic equilibrium for a traditional reactor (TR). Silica membranes prepared at KRICT were characterized with permeation tests on single gases ($N_2$, $H_2$ and $CH_4$). These silica membranes can be also used for high temperature applications such as $H_2$ separation $CO_2$ hydrogenation for methanol production is another reaction where $H_2O$ selective removal can be performed with these silica membranes.

• 멤브레인
• /
• 제15권2호
• /
• pp.121-131
• /
• 2005

한외여과를 통하여 난백으로부터 라이소자임을 분리, 정제하는 연구를 수행하였다. 교반식 한외여과장치에 분획 분자량(MWCO)이 각각 10 kDa, 30 kDa 및 100 kDa의 셀룰로즈 재질 분리막을 사용하여 알부민과 라이소자임의 투과실험 데이터를 수집하였다. 단백질 용액은 20 mM, pH 6, 7, 8의 인산염 완충용액에 난단백 함량을 $1\%,\;2\%,\;3\%$ 및 $10\%$ 첨가하여 제조하였으며, 막간압력차(TMP)는 $0.5\~3$ bar의 구간에서 실험을 하였다. 분리막의 분획분자량이 증가하면서 투과유속은 증가하였으며, 분리막에서의 막간압력차가 증가하면서 그리고 공급원액의 난백농도가 감소하면서 투과유속은 증가하였다. 또한, 분리막의 분획분자량이 감소하면서 알부민의 라이소자임에 대한 선택도는 증가하였으며, 모든 분리막에서 pH 와 공급원액의 난백농도 그리고 막간압력차가 증가하면서 라이소자임의 알부민에 대한 선택도는 증가하였다.

• 멤브레인
• /
• 제16권2호
• /
• pp.123-132
• /
• 2006

PTMSP-silica-PEI 복합막이 PTMSP에 TEOS를 가하여 졸-겔 방법에 의해 제조되었다. 복합막의 특성은 $^1H-NMR$, FT-IR, TGA, XPS, SEM, GPC 등을 사용하여 조사하였고, 복합막의 기체투과 특성을 알아보기 위해 $H_2,\;O_2,\;N_2,\;CO_2,\;CH_4$를 사용하였다. PTMSP-silica-PEI 복합막의 기체 투과도는 TEOS의 함량이 증가함에 따라 증가하였다. $H_2$와 $CH_4$는 15 wt% TEOS에서 PTMSP-PEI 복합막보다 투과도와 선택도가 모두 증가하였다. 한편 $O_2$와 $CO_2$는 선택도의 감소없이 투과도가 증가하는 경향을 나타냈다.